Hi Gerhard,

can you go online with a video stream so that I can tell you (by phone, skype or whatever you like) how to open the box, change or reroute the cables and assemble the mess in the right way?

In reality, the PI doesn't add any functionality to Thetis and to fix it would be a waste of time. I doubt anybody gives a hoot whether it works or not, so why not just remove it all together. It will free up some space for other fantastic features that you have yet to dream up. For troubleshooting...

ramdor wrote:

DL8LAQ wrote:

ramdor wrote:Transverters
great Thanks for the feedback. Have a good weekend. I think I am going to unplug for the duration

Thank you! Have a nice weekend!

ramdor wrote:Transverters

Here is a link to transverter modified version of 21k.
pre 21k2 for testing : https://bit.ly/3lRRQK4
It removes the transverter gain for the auto agc calculations.

That works perfect!

UPDATE 21k add: auto agc options added to AGC/ALC setup tab. This is experimental and relies on panadapter noise floor calcs Auto AGC is very nice, but it requires a different offset for my vhf xvtr. The noise floor on 10m is just below -120 dBm, but just below -140 dBm on VHF. Level CAL on HF, 6m ...

No work!

1) a Quick auto-split button where is goes: VFO-B to +/-5kHz and sets TX to VFO-B, also moves RX channel to left ear and the TX (split freq) to the right ear. Darrin KE9NS did this for me a few years ago in PowerSDR so he may be able to provide the code? Oh yes, I support that! I do that with DDUti...

I don't know

Please, Abhi, check the https certificate or whatever is causing this annoying security thing!

UPDATED 21h2 I updated quickly to 21h2 to fix the tx profile combo box issue at is could cause problems if miss clicked. Sorry I missed that :oops: R. HI Rich, DF2LH found a bug using 144 MHz (xvtr) and CTUN on RX2. VFOA and VFOB can be tuned to any 2m frequency, activate RX2 and click CTUN. The VF...

Thank you, Richie! Have a nice weekend and a good beer!

Jealous! Still holding off on my next build. But it'll be core heavy! Hi Scott, I have got a ASRock Z77Extreme6 without TPM, a I7 3770 and might have to ged rid of it soon. What is your recommendation for high end SDR performance? The graphics card is a GTX1050Ti, so I think a new mobo/cpu/RAM shou...

rjkarizona wrote:I have an ANAN 8000dle and it is working O.K.

Everything was fine until I loaded in the new firmware

package 2.1. Am using software 2.8.11
...

Hi Dick,


I use the latest versions of f/w and s/w with my 7k (also Orion MKII) without any obvious problem. See how it looks at the top info bar.

That's great news Norbert. Tnx for testing that out. I notice in your signature you have a 7000 as well. Have you, or could you also test your 7000 to check how clean the TX spectrum is with the latest firmware? https://apache-labs.com/community/viewtopic.php?f=32&t=3192 Hi Rick, I use 2.1.18 d...

I made some changes that should agree with setup and hold times better. Could you please try: https://www.dropbox.com/s/cl54cp3wb4c9non/Angelia_Protocol_2_v12.1.8.rbf?dl=0 Tnx Rick! I will try that "tomorrow"! It's just before real midnight and I am just back from late shift. Bed time now...

Hi all, - the FPGA heat sink is getting quite hot (55°C on the IR thermometer). When the board is uncovered on the bench the Thetis freeze needs over 30 minutes to occur. ... So I decide to put a dedicated fan over the heat sink (similar to the one which I removed some years ago because of the nois...

Hi Scott, I just did some search & read on the net and I believe to understand now. The internal delays are changing with temperature and now clock and data from the FPGA get a better match within the DAC. Datasheet AD9744: DAC TIMING Input Clock and Data Timing Relationship Dynamic performance ...

In addition, you have proven that there is nothing wrong with the DAC because you say it works fine with P1. Since the clock and data rates to the DAC in both P1 and P2 are identical one should expect the same DAC performance with both versions of firmware. Finally, because freeze spray on the DAC ...

Not clear to me that you're lowering noise or just the noise floor. Are you using a signal generator for your reference level? That level went down 1dB The noise floor of the spectrumanalyzer is just below -40 dBm without signal. The tune signal at 28.050 MHz is around +23dBm. The noise / spur at 1...

Dear friends, I have got a 100D on my bench for checkup and testing firmware versions. I use a spectrumanalyzer at tx out (J3) of the Angelia board to check the spectrum from 10 to 144 MHz (the CMU200 starts at 10 MHz). With v12.1.6 the spectrum is cleaner than that from v12.0. The pictures show a 2...

Hello Norbert, I finally got the current sensor and installed it. What I notice is that the Anan only shows 0.1 A at 13.6 V in RX mode. With TX FM, 12.7 V voltage dip with 95W approx. 12.5 A. If these values are OK, I suspected that the sensor delivers more precise values. 73 Thoren Moin Thoren, my...

Thank you, Richie! The P1 closedown fix comes in handy, since I have got a 100D for check-up. The crashing Thetis was a bit annoying while I tried different f/w versions.

ramdor wrote:MIDI

How much of a problem would it be to break every single midi config?

No problem for me. Do whatever makes Thetis better!

ramdor wrote:5 downloads of the 32bit 21f patch, vs 43 downloads of the 64bit version, so perhaps x86 should stay

Ok, I will not d/l 32bit again Don't need it...

Hi Rich,

could you please change the location of the RA_data.csv to ...User/AppData/blabla...?
Thetis 64 bit cannot write to c:\program files\OpenHPSDR\Thetis\. It works if I run Thetis 64 bit as admin!

W9BHI wrote:Richie,
Squelch (SQL) does not work on either RX1or RX2.
The sliders show a change but there is no squelch action on the audio.
Thanks,

No problem here with the squelch in any mode on RX1 and RX2!

DG1LT wrote:Hello Norbert,
Do you know a fast source of supply with cheap shipping. Thank you in advance for your good help.

Digikey has this device in stock. A quick search for other sources in DL failed.

oe3ide wrote:I almost thought there were some Trekkies here in the community

Me too! )) live long and prosper!

I'm curious what is broken. I inserted the 10 pin cable incorrectly. J15 Orion on J22 PA J10 Ext. To J7 PA That was wrong, the U17 (ADC78H90CIMT) on the Orion Board is already new. What is still broken now? My crystall ball is broken :-) I have disassembled and reassembled many ANANs but never fail...

you are right, i realize now that the term "map" (that is commonly used in the NL) is confusing. For us it doesn't mean roadmap or karte ;) In german language it's "Mappe", in english "folder". In germany we say "Ordner" (Dateiordner = computer file system fo...

PD3LK wrote:So to try, i just deleted my swl list in the map ….\Roaming\OpenHPSDR\Thetis-x64, restarted Thetis and inserted the file again.
Now i have the same issue that DL8LAQ have....

Ups!