Search found 5541 matches

by w-u-2-o
Thu Feb 15, 2024 2:56 pm
Forum: Thetis
Topic: Wishlist >>Transmit noise reduction.
Replies: 16
Views: 1444

Re: Wishlist >>Transmit noise reduction.

n2gq wrote:I currently use the Behringer bigfoot. It only has an asio4all driver which I just discovered on their website.
ASIO4ALL is an ASIO wrapper around WDM.
by w-u-2-o
Wed Feb 14, 2024 11:49 am
Forum: Thetis
Topic: Thetis and openhpsdr mrx ps and Thetis
Replies: 2
Views: 288

Re: Thetis and openhpsdr mrx ps and Thetis

Both openHPSDR mRX PS and Thetis can happily be installed at the same time on the same PC. No special methods are necessary, just use the normal installer for each. There's no need to run one or the other to enjoy different settings. Both Thetis and openHPSDR (aka "PowerSDR") provide a com...
by w-u-2-o
Tue Feb 13, 2024 8:10 pm
Forum: PC's & Homebrew Hardware
Topic: PC build advice
Replies: 8
Views: 1105

Re: PC build advice

Do I need to install HPSDRBootloader, or just HPSDRProgrammer, in order to set the ANAN static IP and NIC priority? To clarify: you don't use either of those utilities to set the Network Metric (what you called "NIC priority"). You do use them to set the ANAN IP. In a multi-NIC environmen...
by w-u-2-o
Tue Feb 13, 2024 8:03 pm
Forum: Protocol 2 Firmware (all radios)
Topic: Firmware fix for RF appearing on RX only ports
Replies: 75
Views: 6641

Re: Firmware fix for RF appearing on RX only ports

Running FW 2.2.2 with Thetis 2.10.3.6 dev_2 on an ANAN-8000DLE. No problems to report at this time, but it's only been running for a few hours.
by w-u-2-o
Tue Feb 13, 2024 7:57 pm
Forum: Thetis
Topic: Wishlist >>Transmit noise reduction.
Replies: 16
Views: 1444

Re: Wishlist >>Transmit noise reduction.

IMHO this is not an unreasonable request. People with noisy shacks that have fans running, etc. often have trouble with background noise. Conceptually it would not be hard to use NR2 on the transmit audio. Of course you probably are aware that the console code in Thetis is quite complex (complex bei...
by w-u-2-o
Tue Feb 13, 2024 4:56 pm
Forum: PC's & Homebrew Hardware
Topic: PC build advice
Replies: 8
Views: 1105

Re: PC build advice

Everything you need to know about Bootloader and the various versions of Programmer is in this topic: https://community.apache-labs.com/viewtopic.php?f=18&t=2333 I prefer to use Bootloader because it always works no matter what firmware you have loaded. NIC priority is a Windows setting and has ...
by w-u-2-o
Tue Feb 13, 2024 3:32 pm
Forum: PC's & Homebrew Hardware
Topic: PC build advice
Replies: 8
Views: 1105

Re: PC build advice

See this topic: viewtopic.php?f=22&t=4127

Remember that Wi-Fi counts as a NIC, i.e. you can use Wi-Fi for your normal network connection and the Ethernet port for the radio.
by w-u-2-o
Tue Feb 13, 2024 12:05 pm
Forum: PC's & Homebrew Hardware
Topic: PC build advice
Replies: 8
Views: 1105

Re: PC build advice

Thetis benefits from a lot of cores/threads. Get at least an 8 core (16 thread) CPU. 12 cores would be even better. At equivalent speed/price points the AMD CPUs generally offer more cores. If I was building new I'd be getting a Ryzen 9 with 12 or 16 cores. Memory requirements are driven by Windows ...
by w-u-2-o
Mon Feb 12, 2024 11:11 am
Forum: Digital ("Virtual") Audio
Topic: cmASIO feature in Thetis
Replies: 232
Views: 78868

Re: cmASIO feature in Thetis

It's the same list no matter what input is selected: mic, line, VAC, cmASIO.
by w-u-2-o
Sun Feb 11, 2024 12:04 am
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: VK Amps KM3KM Sampler Comparison
Replies: 1
Views: 478

Re: VK Amps KM3KM Sampler Comparison

-65 dB is too much. The -55 dB of the VK unit is perfect at the legal limit.
by w-u-2-o
Sat Feb 10, 2024 11:47 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: TX audio - Rack gear to Anan G2 interface questions
Replies: 5
Views: 486

Re: TX audio - Rack gear to Anan G2 interface questions

The other thread should answer your question.
by w-u-2-o
Sat Feb 10, 2024 7:43 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: TX audio - Rack gear to Anan G2 interface questions
Replies: 5
Views: 486

Re: TX audio - Rack gear to Anan G2 interface questions

Would the 1/8" TRS 'Line In' be a better choice, due to the high gain mic pre on the XLR input? Hard to say. You'll have to try it. As I already wrote, a lot of people have had trouble using the G2 balanced input even with just a microphone by itself. 1) What is the simplest way to 'bridge' my...
by w-u-2-o
Sat Feb 10, 2024 6:20 pm
Forum: Thetis
Topic: Can you use CAT/MIDI at the same time?
Replies: 12
Views: 640

Re: Can you use CAT/MIDI at the same time?

Why would you suggest analog through CAT? Not doubting your knowledge, just wondering. IMHO, MIDI is a lot of extra processing in order to form the required MIDI messages. Click a button or turn a knob one increment and puke out the appropriate CAT message seems simpler to me, especially if I was c...
by w-u-2-o
Sat Feb 10, 2024 6:12 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: TX audio - Rack gear to Anan G2 interface questions
Replies: 5
Views: 486

Re: TX audio - Rack gear to Anan G2 interface questions

For line in see here: https://www.w1aex.com/anan/anan.html#audio_chain The G2 has a balanced input on the rear. I don't have a G2 but I believe that connector is a 1/4" TRS jack. People have had all manner of difficulty trying to use that input but theoretically it is the obvious way to go. One...
by w-u-2-o
Sat Feb 10, 2024 6:04 pm
Forum: Thetis
Topic: Beginning of transmission spike
Replies: 23
Views: 1274

Re: Beginning of transmission spike

AFAIK the Purge Buffers option only affects the spectral display and not any audio.
by w-u-2-o
Sat Feb 10, 2024 4:23 pm
Forum: Thetis
Topic: Beginning of transmission spike
Replies: 23
Views: 1274

Re: Beginning of transmission spike

This problem occurs even without external source of latency like Voicemeeter. The problem is that the Thetis TX audio pipeline is not flushed prior to the start of the transmission. This problem can be mitigated by setting General > Options > Options-1 > RF Delay to an appropriate value. I've never ...
by w-u-2-o
Fri Feb 09, 2024 11:41 pm
Forum: Thetis
Topic: Can you use CAT/MIDI at the same time?
Replies: 12
Views: 640

Re: Can you use CAT/MIDI at the same time?

There will be no conflicts. Internal Thetis logic is "last command wins".

You might consider processing the analog controls into CAT rather than MIDI.

Note also that Thetis can accept CAT over IP as well as serial.
by w-u-2-o
Fri Feb 09, 2024 4:05 pm
Forum: G2 Operating System & Applications
Topic: Script to download the latest Pro2 and P2app
Replies: 19
Views: 1140

Re: Script to download the latest Pro2 and P2app

K5WC wrote:It would be nice if we had a pinned post in the G2 section about software and firmware updates was posted.


Like this one: viewtopic.php?f=48&t=4772 ?

A quick post to the bottom of that one by one of you G2 folks might be all that is necessary.
by w-u-2-o
Thu Feb 08, 2024 12:07 pm
Forum: Apache-specific Hardware Discussions
Topic: Ext 10Mhz input level.
Replies: 2
Views: 219

Re: Ext 10Mhz input level.

That will work fine.

See also this large thread on GPSDO use: viewtopic.php?f=17&t=2499
by w-u-2-o
Thu Feb 08, 2024 12:20 am
Forum: Thetis
Topic: Thetis 2.0.3.6 dev_2 issues
Replies: 6
Views: 1299

Re: Thetis 2.0.3.6 dev_2 issues

Power cycling the ANAN hardware to fix a problem indicates that the firmware went to a bad place and needed to be rebooted.
by w-u-2-o
Tue Feb 06, 2024 7:20 pm
Forum: Protocol 2 Firmware (all radios)
Topic: Update to Firmware Ver: 2.2.2 No communication
Replies: 9
Views: 643

Re: Update to Firmware Ver: 2.2.2 No communication

Very detailed instructions for using Bootloader are here:

viewtopic.php?f=18&t=2333

You must follow them very precisely lest you run into problems.
by w-u-2-o
Tue Feb 06, 2024 3:47 pm
Forum: Protocol 2 Firmware (all radios)
Topic: Update to Firmware Ver: 2.2.2 No communication
Replies: 9
Views: 643

Re: Update to Firmware Ver: 2.2.2 No communication

Loading firmware with the bootloader is the "hard reset". Step 1 is to go back to the original firmware and make sure everything is working OK. If that does not work then that suggests you are not performing the firmware loading process correctly. If it does work, then you can retry one of...
by w-u-2-o
Tue Feb 06, 2024 12:09 pm
Forum: Protocol 2 Firmware (all radios)
Topic: Update to Firmware Ver: 2.2.2 No communication
Replies: 9
Views: 643

Re: Update to Firmware Ver: 2.2.2 No communication

Did you use the right firmware? What FPGA is inside your 7000 (you can tell by what version firmware was in their before)? See these links for reference: https://community.apache-labs.com/viewtopic.php?f=32&t=4462 https://community.apache-labs.com/viewtopic.php?f=32&t=4972 Assuming you did l...
by w-u-2-o
Mon Feb 05, 2024 3:15 pm
Forum: Thetis
Topic: How to build Thetis in Visual Studio?
Replies: 8
Views: 3112

Re: How to build Thetis in Visual Studio?

Recently there was a question about building the installer and getting an .msi file. Here's the process I used... If you look in the VS Solution Explorer pane, you'll see an element called Thetis-Installer. When you build the entire solution at the top level, if you've got the right dependencies ins...
by w-u-2-o
Sat Feb 03, 2024 10:27 pm
Forum: Upgrading/Downgrading
Topic: Is Bootloader working OK for people who are running Windows 11?
Replies: 23
Views: 5583

Re: Is Bootloader working OK for people who are running Windows 11?

Two NICs? Try disabling the NIC you don't need prior to running Bootloader (Settings > Network & Internet > Change adapter options, right click on the adapter in question). You won't break anything by doing this, you can simply enable it again when you are done.
by w-u-2-o
Thu Feb 01, 2024 5:53 pm
Forum: Protocol 2 Firmware (all radios)
Topic: Firmware fix for RF appearing on RX only ports
Replies: 75
Views: 6641

Re: Firmware fix for RF appearing on RX only ports

I just istalled Firmware 2 12.2.1A in my 100D first edition. Now I have "sequence error 264 / 265 (DDC2 Mic)" and an distordet audio. Database reset has no effect. Any idea? Yes. Unfortunately that firmware version is not closing timing on your hardware. You will have to petition Rick for...
by w-u-2-o
Thu Feb 01, 2024 11:48 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: Log4OM not receiving CW mode info
Replies: 3
Views: 1070

Re: Log4OM not receiving CW mode info

I've recently started using CMaudio with a Behringer UMC202HD and ASIO driver. I also know that I no longer have cw sidetone. Could this CW mode info not being sent to Log4OM be a side effect of CMaudio? No, it's not a side effect of CMaudio. There is no CW sidetone available when VAC or CMaudio is...
by w-u-2-o
Thu Feb 01, 2024 11:41 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: Log4OM not receiving CW mode info
Replies: 3
Views: 1070

Re: Log4OM not receiving CW mode info

Disclaimer: I don't use Log4OM. TCI is not 100% implemented in Thetis. Try using the network hamlib method instead. See page 23 in the Log4OM manual and also this link: https://community.apache-labs.com/viewtopic.php?f=22&t=4249&p=28188 If Log4OM is built using the latest version of hamlib y...
by w-u-2-o
Thu Feb 01, 2024 11:31 am
Forum: Protocol 2 Firmware (all radios)
Topic: Firmware fix for RF appearing on RX only ports
Replies: 75
Views: 6641

Re: Firmware fix for RF appearing on RX only ports

Would it be a good idea to install this new firmware for my 8000DLE even if I don't do CW? I haven't encountered any of the problems mentioned on Github. But, since I only use phone, I don't know if the problem would cause problems with other modes and possibly do some damage to my radio. James WD5...
by w-u-2-o
Wed Jan 31, 2024 5:55 pm
Forum: Thetis
Topic: 700DLE/Thetis ext 10 Mhz sorce( AND) correction factor?
Replies: 12
Views: 1940

Re: 700DLE/Thetis ext 10 Mhz sorce( AND) correction factor?

So what's different about 2.2.2b? In this case it's just two different compiles of the same code. The problem with the free Quartus Lite FPGA development environment is that it is impossible to lock down the timing (aka incremental build, aka floor planning). So every compile results in slightly di...

Go to advanced search