Many thanks for the detailed response. 1. The MB is a GIGABYTE GA-H110M-S2H 2. Tried running LM for nearly an hour at 192000 and as predicted it shows errors. Screenshot 2017-07-03 RX@192000.png 3. Regards cooling. Picture of fan:- IMG_7918.JPG From what you say my case is not really suitable as it ...

Your right Brent. The fans are not up to spec. The main CPU has a Heat sink with a working fan mounted on it, but the only other fan is in the PSU. The case does not have its own fan. Also, I wonder if I have plugged the CPU fan into the case fan position, so it is not showing up? I shall have to co...

Hello Scott,

I have now tried resmon as you suggest and post it for inspection.
I wonder what you think..



73
Geoff G3NPI

Hello Brent, I managed to get into the BIOS using the DEL key (must have tried 20 times before without success). Anyway the CPU temp looked OK at 41deg C in the BIOS. Then tried CPUID monitor and the results are attached. Screenshot 2017-07-02 17.05.37.png Screenshot 2017-07-02 17.18.18.png Any comm...

Many thanks for the replies. I have started to work through the suggestions and accumulate data. However whilst using rescom I noticed it said the CPU was running at 1Gb instead of 3.6Gb probably because of a temperature problem. Tried to open the BIOS to have a look and the usual DEL button on boot...

Unfortunately I still have RX and TX stutter on the i7 machine. I can reduce it to an acceptable level by reducing the Primary Audio Sample Rate to 192000, but this of course reduces the visual band width. It must be down to a difference between the PCs, which is not obvious to me. In case someone c...

Hi Rob,

Sorry for the delay in replying. We have been on holiday.
Yes that is the form which is cleared and has to be repopulated on reload.

73

Geoff G3NPI

Thank you for having a look at this problem. If I Export the Database then Import it, the XVTR Setup page is completely blank. So it is as if it is deleted and not saved. I hope it is fixable, because for operators with a few Transverters connected it takes a while to restore them. However I do love...

Well Scott, I have at last found why one PC shows a Network Utilitation of 90% and the other 9%. It is due to the 3 feet of Network cable linking the PC to the Router. Other than being a black cable, it is commercially made and looks like the other cables I have in my box. I suppose it was the ratio...

Just installed a new i7 motherboard (to replace i5) and noticed a low (in frequency and level) stuttering/popping noise using v3.4.1 and ANAN 10. As the radio is OK on the i5 board and reading this thread I concluded it was the network. The difference being I am using a local wired network. Using Ta...

I have been trying the new transmit profiles and will try the ultimate dx version during an up coming vhf contest!! However, I use a transverter and after loading a new transmit profile I find the XVTR profile has been dropped and even doing an Import Database does not restore it. Presumably the XVT...

Just to round this off. I must have corrupted the N1MM s/w somehow. The answer is to delete N1MM and reinstall it, remembering to retain the Call History File; UserDefinedContests and Wav folders. Also your database files to copy into the new copy of N1MM. Many thanks for the comments which spurred ...

Yes I agree Scott, but as that version has been out several weeks I thought perhaps someone else using HPSDR and N1MM would have had the same problem and perhaps have a work around. I will wait a couple of days and see if anybody else has the problem. If they have, then I will put together a report ...

I guess I have a setup problem, but after many hours I have not been able to sort it. The problem is as follows:- 1. Run HPSDR (v3.4.1 but occured on earlier versions as well) then start N1MM+ (latest version) part way through starting it will lock the PTT line ON 2. Going into N1MM+ Config>Config P...