I have had the same issue at times here lately, I’m not sure but seems to have happened after windows update. I am running windows 11. I went through everything you describe and finally just powered everything down, computer, etc. After a complete power down all started back up fine with no issues. ...

I just wanted to add to the gratefulness that I have for this project/platform. I am an early adapter with the sdr1000 and Janus/ozy along with many of the other software and hardware additions from the HPSDR community. I just mention that because there are so many people as stated that have contrib...

Thanks very much - Richie and Ernst! Great Work, many hours for sure! Looks Great!

73's
Joe
WD5Y

Hey, I'm glad you were not looking over my shoulder while working out details on VS. I know you will be very impressed looking over Richie's work!

73's
Joe
WD5Y

Hello Scott, I'm just checking, I know you did the cloning feature. To get the latest from Richie, I normally download the Zip folder (Meters, as this is the latest; not Master), be sure you right click on the Meters zip folder, then select properties, select the Unblock checkbox hit apply, etc. The...

I hope Richie doesn’t mind me posting this, I have been anxiously downloading his “wip” source code which believe me is very hard to keep up with as it is mostly Daily. It is Very Very many lines of coding, probably hundreds of lines. To say the least, I am amazed at his work, Awsome! I believe ever...

Sorry about that, I thought there was a flag that mentioned pure signal and sampling rate.

Thanks,
Joe
WD5Y

Scott,
I am asking this and I may be way off here but using above a 192khz sample rate, does this affect Pure Signal. I may be off on a tangent here and apologize if so?

Thanks,
Joe
WD5Y

https://community.apache-labs.com/viewtopic.php?f=17&t=3692&hilit=WD5Y I hope this helps a bit. I posted this quite some time ago. The actual software has been much improved by Richie for control. I use the OC for bcd inputs - amp band selection. I also attached a schematic “file”, that show...

Richie,
Fantastic work on all. Thanks so much,

73’s
Joe
WD5Y

I attached two photos, one of the rack with the 8000 shown and one screen shot. I also have a LDMOS amp that I built which is interfaced to the 8000 through a wavenode wn-2, the interface is made up of a relay / input section with specific cabling that I made. Everything is remote although I am in t...

Richie, I do have a version on GitHub, I want to apologize to you personally. I left your name on the version I worked with on GitHub because I felt if your name was removed it would be incorrect with all of the work you put into it and believe me, working with Thetis coding is a major task. I have ...

Yevgeni, I'm not sure exactly what is going on in the code but if you go to setup and select the "options" tab then select "enable RX1 and RX2" step attenuators the meters work correctly. I'm not sure but it may have something to do with the ADC linking? Also. when going from col...

There is a drop down on the meter tab under the appearance tab in setup that will allow you to select a skin for the meters. That’s the only setup per say. I have a meters folder on the GitHub download that has different skins. You will need to down load this folder and put beside your main skins fo...

https://github.com/WD5Y/Thetis-2.9.0_WD5Y

I wanted to post the site location on GitHub here as well, hope this helps.

Joe
WD5Y

They should stay on top unless you disable that function in the drop down on the main screen. This was added in the last GitHub upload a few days ago. There are some other additions as well on the “meter” drop down tab that should be helpful too. The Thetis is dated 12/25/22.

73’s
Joe
WD5Y

No, I just have a version with my own additions. I did post a couple of days ago that I had this on Github. It is just Richie's latest with some of my additions mainly regarding the new meters, pure signal form selections, and a bit of cleanup regarding the Collapsed form. I'm still working on some ...

The version you downloaded had the actual "checkbox" function erased. I found that as well and had to re-install to an earlier version and re-enter my changes along with double checking. There are a few other functions with the same issue - TX-Inhibit for one, not sure how this happened? o...

Thanks Clay, I prefer the collapsed view as well with the Andromeda buttons on the bottom selected. I didn’t realize that some of the “expanded view” buttons were showing up on the collapsed view at times when different modes were selected, so I worked at cleaning that up, hope I got it all. Also, o...

https://github.com/WD5Y/Thetis-2.9.0_WD5Y I have been working on Thetis with Meters. I have updated and finally cleared up use with Github to complete a good upload for me. I have a release so you can load and try if wanted instead of having to run visual studio to compile. I tested on my machine, a...

Thanks, I made a couple of adjustments, I found that when you use RX2 and the meters are in home position - “meter tab”, the main multimeter might trigger to the stretched position. I did change that but have not updated the GitHub repo yet. Also, I put a pop-up on the main multimeter that explains ...

I finally figured out how to load to github some changes to Thetis regarding the new meters, Pure Signal windows, and a few other things. I have the release portion as well as the code there. I have a "read.me" file that hopefully explains a bit. This is Richie's latest with some "GUI...

You should be able to enable the meters by going to the “options” tab in the setup, then select the 2nd “options” tab, be sure the meters checkbox is correctly selected. I am working on another update that is actually Richie’s latest version. The meters are capable of better control with a few other...

I totally agree with getting Richie on board with this, I actually sent him an email about two weeks ago but he is probably very busy so I just posted anyway. Mainly thanks to Sigi for the extra work on the installer. I did not realize at the time but Richie had an update one step further than the o...

I need to work on that, I don’t have any experience with that step. Honestly, I was hoping someone would take a look at what I put in Thetis and use what they thought would be of value to most. I know the new multimeter docking location save and ability to launch at startup would be helpful, also I ...

https://github.com/WD5Y WD5Y/VS_2022 Just wanted to post this, I have uploaded some source code additions to my GitHub repository. First if anything I am very much in the beginner or learning stage so take it as you will. If anything maybe someone could refine the coding because I make mistakes. If ...

I forgot to mention that the vac run-away rate only appeared after releasing the PTT. I saw some other posts that claimed this issue and did not want this to be the cause of the problem.

Thanks
Joe
WD5Y

I understand now, it sure had me going in circles for a while, ha!

73’s
Joe

Not sure if this will help anyone but I wanted to post. I started getting extreme VAC buffer over-runs and started backing into things I had changed and found this issue in my case: I had the main sampling rate at 192khz with PS Enabled (VAC @ Manual) and chose the checkbox option "Display PS-R...

I’m sorry, I’ve got to say something here, and I mean this with all respect to this forum. There is no way the radio can cause windows to not load independently. I do hope you get the computer error repaired, you will be very happy with the 7000, after all corrected. When someone is answering your q...