apache-labs.com

ramdor

wa1oxt wrote:Got this error on start-this morning when starting 2.7.0 a1 !
oxt

Gary, can you attach your database.xml please.

ramdor

Changes to 2.6.9 have now ended. Development version is now 2.7.0 and a new thread has been started.

ramdor

placeholder2

ramdor

Hi all, I have spent a couple of hours getting back up to speed with what has been going on with Thetis, which has now moved on up to 2.7.0 as a pre-release active development version. I will continue to post here my latest compiled exe as a zip including all relevant files that just need to be plac...

ramdor

But in the meantime, back to fighting the seemingly excessive CPU usage. 73 Brian VK3BD Hi Brian, 1) make sure video drivers are fully up to date, reboot if you have needed to update them Use single RX1 only for now Under section Settings->Display->General->Driver Engine 2) Enable DirectX 3) Check ...

ramdor

Have to check General> Options1 "wheel tunes outside spectral". The outside spectral area causing issues for keypress is now fixed, cheers for spotting this Brian. I have also added some code to trap cursor keys and pass those keycodes to the relevant handlers. Afaik selecting Up/Down/Lef...

ramdor

As long as the red box isnt showing it should be ok. Also perhaps reduce the rx sample rate as another test.

: 2.png (8.28 KiB) Viewed 5630 times

Richie.

ramdor

Should the change have a favorable effect on the problem I have been experiencing or was it just an unrelated issue you spotted? You will have to let me know ;) When that red square is shown in GDI+ display mode, the Thetis main thread is bogged down and is unable to service the frame rate required...

ramdor

If possible, try to use the DirectX engine, and drop desired frame rate so that the red box top left goes away. If you are unable to run directX then use GDI+ and lower desired frame rate in the same way. Having that red box top left is not good, especially when in GDI+ mode. If you have to use GDI+...

ramdor

Probably Phil. I just had a quick check of 2.6.9 Thetis code vs 3.4.9 OpenHPSDR-PowerSDR and other than a tx_xvtr_index>=0 wrapping the PA operation state, there doesn't seem to be any difference. Operationally it looks the same. Might have missed something, perhaps someone else can check.

Richie.

ramdor

Tony EI7BMB wrote:Anyone got a link for Doug's latest github repo please ? I'm only seeing old versions on the link I have

see pm

ramdor

Just to muddy the water a tad, even with stable vac settings and increased buffer sizes, I sometimes (perhaps once/twice a week) had issues with Muzychenko's vac and it would give similar results to the top image seen on both the anan+thetis and sunsdr2pro+expertsdr. A quick restart of his audio eng...

ramdor

UPDATE Hi all, Just a quick update, last one for a while from me as I am a tad busy atm. I am planning on working on a dockable configurable s-meter when I get back to development perhaps end of Jan sometime in Feb. This is going to be used as the starter 'project' to get a feel for the docking 'wa...

ramdor

Thank you Richie for the ID timer! But, shouldn't it count down , rather than up? If it counted down, one would know at a glance how much time remains before an ID is needed. 73, John W1JA aye, all noted John, however at the moment it is qso/tx timer, not just an id countdown timer. You can use to ...

ramdor

Thanks for C2_1 Richie. Love the QSO timer with auto-reset and how quick and easy it is to use. Everything is working very well with 2.6.9 (c2_1) here. 73, Rob W1AEX nice one Rob. There may be some other ideas for it from others, but it seems to work ok. The audio playback is quite simple for now. ...

ramdor

Update post above has new links to c2_1

73 Richie.

ramdor

NC3Z wrote:Any way you can add an option to reset once it hits the Expiration and count again?

yep, will do a repeat option, forgot about that

ramdor

UPDATE link updated to c2_1 HI all, Quick update, please try : link removed, see post #1 or latter posts ⋅ QSO timer settings added to Options2 tab until a sort out/tidy of the setup happens. ⋅ Left click on the timer on the status bar to enable/disable, or right click it to res...

ramdor

w-u-2-o wrote:Here's another contender:

https://www.amazon.com/MOTU-M2-USB-C-Audio-Interface/dp/B0812B26TN

that motu looks interesting, but still usb2 over usb-c connection as far as i can tell according to the specs, same for the motu-m4

Richie.

ramdor

I have a little problem with Pure Signal since version 2.6.9_C1. I use about 15 seconds and the Pure Signal no longer works. The PS-A button is still working, but the two green Correcting and Feedback boxes turn black. Tried several times always the same problem. Version 2.6.9_B6 and previous versi...

ramdor

I noticed that Eugene Muzychenko updated his VAC software recently with a bunch of changes, now on version 4.62.

This peaked my interest from version 4.61 (30.12.19)

- Replaced independent cable clock sources with a single kernel timer to allow multiple cables to be coherent.

RIchie.

ramdor

C1: PS stops correcting if you open setup to change anything , after apply/ok then PS must be turn off & on to get back to correcting Not happening here. I can leave PS-A on, in and out of settings, save/apply, then mox, and PS is correcting/calibrating no problem. I thought it odd because C1 o...

ramdor

I have had a quick look at the issue where PS is seemingly not working when profile is changed and can only assume it is a firmware problem. I can not replicate it here on my 7000dl mk2 running pre8 firmware. I can have a TX profile with PS disabled, switch profile to where it is enabled and it work...

ramdor

Noted on the PS tx profile issue, and noted on the ToT in status bar. Richie.

ramdor

I am getting an error box trying to run thetis. Here is a screen shot. Doc1.docx Please send me your database.xml from folder C:\Users\<username>\AppData\Roaming\OpenHPSDR\Thetis, either attach as a post here, or to my email available on QRZ. After that, you will probably be able to get it running ...

ramdor

UPDATE Hi all, I hope everyone had a good Christmas/New Year. I have not found any time to spend on Thetis over the period, and wont for about another week. In the meantime, Chris W2PA has a fix to the QSK issue where TX antenna is different to RX antenna. As his changes are important an early buil...

ramdor

cLicari wrote:Richie...
What is the URL for pre8 ?
Thx
Carl
NX5T

viewtopic.php?f=32&t=3192

ramdor

Cheers for comments

Last couple of weeks have been hectic so not had much time to turn the radio on. I see that Rick has released pre8 so I must try that hopefully later today.

Hope everyone had a good Christmas, I am still recovering from food overload

73 Richie.

ramdor

With the Thetis_2330_201219_269_b6.zip version the display is ok, but with the Thetis_v2.6.9-b6_Setup_24Dec19.msi version the display is missing. Is it the same version?msi.jpg Michel Just emailed Doug about it, some bits related to this were missed out. I guess he will re-do/re-release at some poi...

ramdor

hah yeah, it would be nice

The block of code is ready and waiting for someone to fill it in :shock:

Code: Select all

                case MultiMeterDisplayMode.Analog:
                    #region Analog

                    #endregion
                    break;

Richie.

Search found 380 matches

Re: 2.7.0

Re: 2.6.9

Re: 2.7.0

2.7.0

Re: 2.6.9

Re: 2.6.9

Re: Glitches in TUNE signal viewed with Duplex on

Re: Glitches in TUNE signal viewed with Duplex on

Re: Glitches in TUNE signal viewed with Duplex on

Re: 2.6.9

Re: 2.6.9

Re: VAC/audio problems on 200D

Re: 2.6.9

Re: 2.6.9

Re: 2.6.9

Re: 2.6.9

Re: 2.6.9

Re: 2.6.9

Re: Presonus Studio 192 Mobile audio interface

Re: 2.6.9

VAC update (muzychenko)

Re: 2.6.9

Re: 2.6.9

Re: 2.6.9

Re: 2.6.9

Re: 2.6.9

Re: 2.6.9

Re: 2.6.9

Re: 2.6.9

Re: 2.6.9