50" monitor???? Holy crap.[/quote]

Really like to have such a big monitor. Think there is a picture on my QRZ page on my setup. Is not up to date, but about anyway

Running c1 384KHz sample rate on 50" 4k 60Hz monitor 60fps currently showing around 7% CPU here on a newly built i9 9900K @5GHz.

We are eternally grateful to all the mods for sure, so I just say keep up the good work and it's so damn fun to get something new no matter the size of it all!
As someone previously said: it's like a new radio every day

Hello everybody! Now I have started from the beginning with a clean installation and manually adjusted all settings and it works just fine. The only thing that is a pity is one of my favorite features, namely Special PanaFall Mode which does not work. But otherwise everything seems to work as it sho...

Good news ramdor!
I'll try this when I get home from work tonight and announce how it works

Hi! It was this that I tried to explain a bit above here. It was the same phenomenon in the last big release of Thetis and then it worked if you changed the language of the computer to English which I have not been able to test this time. It is different how comma and dot are used what I can see in ...

Hey all! My 200D Rev 24 got pretty weird with 2.6.8 on many points and I was forced to go back to 2.6.7. To mention one thing, there were four decimal places on the frequency and they could not be zeroed. After a while, it also crashed. Compare the XML documents to both versions and see that points ...

Thank you so much for your input Rob!

I have set to 125% scaling, but unfortunately no difference if I change neither up nor down.

Unfortunately same Fatal Error om my side

I've also had this problem with my 200D. Noted that the switch went a little slow, so I unscrewed the front and disassembled the connector and lubricated the actual operating part that is in the front and it went much easier immediately. Assembled everything together and it worked out as it should. ...

I also have it in operation now and it seems to work very well

Everything seems to work for me with my 200D Rev 24 except pure signal. No difference with or without it. Otherwise very stable as it seems.

Enter Setup and General and HardwareConfig and check the box for PTT, then it should work.

Thank you for your reply friends. Played with my settings tonight on my Mackie Big Knob Studio + soundcard, and found that 512 on Primary and 128 on VAC works best. Had too much buffer set to the sound card earlier as it seems. Do not run any VMB or the like at this time. Then I get to correct previ...

No one else who shares what you drive with for buffer settings?
Hmmm

What are your settings with the new firmware companions?
I have best resultat with 2048 on Primary and 128 in VAC with my USB2 Soundcard in my computer.
Just a thought from me

Fun to hear you play with different setups and so on, but clearly you can mess with different settings, cables and anything else you did not think about when you started.
I'll just, as it's called ....
We want to see a picture of it, otherwise it never happened

Looks good Scott! I keep on rebuilding and trying to eleminate everything that I really do not need, but it will quickly get a lot of cable that requires a lot of work ... As I wrote in another part of this forum, I rarely have the same setup more than a month or two before I'm rebuilding, because t...

Exciting news!

I have also had this phenomenon on my 200D Rev24, but after a database reset, it has been good again.

I have to say I'm getting more impressed with this Presonus Studio 192 Mobile sound card the more I read about it and the more Youtube videos I see! Their UC Surface and Fat Channel plug-in processing on every analog input seems to be cruel! All I do not like is the form factor on it which is not ea...

I have been coming to me for several nights in a row, I'm awake and just listening to my new headphones folded must be a good sign!
So do not worry if you buy new headphones

In any case, I have read on many other forums about which headphones are best for what and so on, so I was going to contribute my contribution here. However, lately, I have found that my headphones they sound a bit "sad" if I say so. Sure, they are extremely honest and flat in the performa...

I interpret that "these" sound cards are over-priced for us radio amateurs. What I want is software so you can influence what you want now via the computer and not just a hardware on its card. As I said, I have stuck to Universal Audio's products, but do you think anything works to what we...

I guess you on the west side of the globe have known of the strange condensation that has been this fall. Have just called a general call and the time is at 04.00 on Saturday morning here. Checked out with various SDR recipients around the world and suddenly I hear myself on a fairly local receiver ...

I can tell you that today I got my new Wavenode probe with RF View so I can measure my Acom 1500.
Just in this moment, it is about solving cable between the probe and the radio.
Tells later how it works.

73
Tommy, sa3atf

What I wonder is mainly the difference between sound cards for 200, 600, 1000 EUR for even more and, above all, how we defend this to the hobby we have.
Believe that more than I think of this

73
Tommy, sa3atf from the bottom of the Grubba

I understand that you want to keep this more strict so that we do not have "play houses" here that can often be found on many forums, but just posting more categories does not mean abuse, but maybe more visitors and more activity.
Yes yes, just a suggestion from me

I would like a few more categories on this otherwise supreme forum. There could be tips on everything from high quality music, fun or interesting links, what you're doing right now to shack pictures or radio images at all. I think it could mess up this forum that's otherwise awesome! I think that mo...

Perhaps I should tell you that I have a Heil PR40 microphone that goes into my audio card that is an M-Audio M2X2M and from there with a USB C cable to the computer.