Finally hooked up the Universal Audio Volt 1 interface this evening. I get the green CM icon on the lower right side of the Thetis display. I have VAC turned off. But, turning the volume up in Thetis or the Volt 1 just produces a high pitched squeaking sound. I even tried Voicemeter Potato to see i...

Hi Ruben,

One more thing to keep in mind, because it's not immediately obvious, with the UMC202 (and all two input interfaces) both mic inputs are hot at the same time. So be sure to turn down the mic that you're not using,
(Although, it might be an interesting sound, come to think of it.)
73,
Bryan

I have my MIC level set to the same 1db you have displayed there. Make sure the LINE/INST and the PAD buttons on the UMC are both popped out. Turn up the gain on the UMC until the CLIP led starts blinking, then back off a smidge. Turn OFF the 48v slide switch on the back, unless your microphone nee...

I emailed you a photo of the hostsample output screen. Here it is just in case you don't get it. That all looks perfect! The only thing left to try is more room in the fifo. Maybe it's a little sluggish and needs more help with thread synchronization. Add a DWORD value to the same reg key called AS...

Just press any key, and the subsequent screens are generated, until all the running ASIO drivers have been reported.

Hi James,

Unfortunately, you have become the guinea pig for the Audio Volt
Can you email me the detail output screen from hostsample?
What I'm looking for is the not the first screen that comes out, but the one with all the gory details about the Adio Volt.

73,
Bryan

I get the green CM icon on the lower right side of the Thetis display. But, turning the volume up in Thetis or the Volt 1 just produces a high pitched squeaking sound. Hi James, First off, Scott is correct: the Behringer UMC202HD is a no-brainer hookup. If you can get a refund from Guitar Center, I...

What would happen if the driver was not set to 48KHz sample rate? In that case, a request to change to 48,000 is sent to the ASIO API. If that is successful, steps then proceed to bring the driver into its "prepared" state. If not, a debug message is sent reporting the specific trouble, t...

how or where do I select the inputs and outputs on my interface that I want to use to be the Anan speakers for output and the mic for input? Hi Terry, Thetis uses Input_1 & Input_2 for transmit (mic) audio and Output_1 & Output_2 for receive (headphone/speaker) audio. It's hard-coded, nothi...

I have used the hotsample.exe. It says "RODECaster" and when I add the string to registry, then reboot thetis; it says issue starting cmASIO check driver name in registry. Hi OM, Can you please send me (by PM or email) the complete output from the hostsample.exe utility? Since the RODECas...

I am running the 7000dle MKII (protocol 2) with a RODECaster duo and the ASIO drivers are installed for it. Is there something I am missing or is it incompatible? Hi OM, I don't have any experience with the RODEcaster, so it looks like you are the first to try :-) What was the text you used to popu...

2) Can LockMode function even though my Motu interface isn't on the same clock as the ANAN or my computer? 3) How does one verify that LockMode is actually functioning? I ask because I have the ASIOblocknum DWORD high bit set but I'm seeing no difference in core workload using CPUID Hardware Monito...

So, essentially I gave cmASIO a go then disabled it in case the registry setting was interfering with VAC to/from the radio. Hi Dave, Okay, I understand now. Thanks for explaining! In that case, you'd be better off to delete the ASIOdrivername string value, which will return your rig to its default...

I'm no audio expert so I suspect a wrong setting has got into my audio chain accidently as a result of the cmASIO changes in Thetis. I have made sure that the cmASIO Registry changes have been disabled by putting in a false ASIO name. Hi Dave, Just out of curiosity: please help me understand why yo...

Hi Joe, Yes, that's a valid entry for the registry key value. You might want to first try ffff0006 just to get your feet wet using blockMode. That way, you're not being too ambitious with the receive audio stream at the same time that you're trying to push the transmit audio stream. Once you see tha...

I use the UMC202HD and it works fine with cmASIO on input channel 1. Is there anyway to switch to channel 2 on he 202HD using cmASIO in order to select a different microphone without having to use VoiceMeter? Hi Joe, Yes, cmASIO picks up both input channels on the 202, just plug in the mic and turn...

I feel jealous because I can't make it flash here

Yes, slow as a slug!
Good catch on the thread view count, though.

Surely, Abhi doesn't host this on his own server?

Can't duplicate your bug.
Works fine here OM

Just turn off CAT/TCI and it works FB

Hi Tony,
Not seeing the blinking cmASIO icon, looks steady here on pre-5.
My CAT/TCI icon is OFF however.
73,
Bryan

Well I dont believe it, I have it working, So I've set the output of VoiceMeeter to the M-Audio M-Track Solo ASIO 48khz 64 Changed the Registry entry to Voicemeeter Virtual ASIO Started Thetis and I got a green cm speaker !! Audio is now routed via Voicemeeter to the M-Audio and the internal sound ...

Placebo effect

Update from here So I tried the M-Audio on a laptop, had the same results Hi Jim, As far as I know, you are the first user to try the M-Track Solo (or any M Audio device for that matter) with cmASIO. So, it's possible that the M-Track ASIO driver is just plain incompatible with cmASIO. I will have ...

Correct me if I am wrong but isnt cmASIO designed for hardware ASIO devices? Just reconfigured to use cmASIO last night and it works great on the Scarlett, got VAC working on both receivers so I can send audio to OBS and the digital recorder without impacting ASIO. Could never do that before and is...

Hi Mark,

Look to the right. Richie moved it for pre-release-5, but it's still there!

73,
Bryan

Exactly the same results, rebooted PC, M-Audio M-Track set to 48000 and buffer size 64 I'm going to try the M-Audio on a different PC Hi Jim, One more thing I just remembered you should check. When you populated the registry key value with your driver name, if you left a trailing space at the end o...

I see your VAC1 is enabled.
What is it connected to?

That's correct Tony, about the sampling rate. Repeat all of yours above, but this time with the M-Audio sampling rate having been set to 48000 in advance. Looking at your debugview output suggests that you may have had the hostsample detail screen open while Thetis was trying to start. Because it's ...

K4IBC wrote:Should he change his regedit to the M-Track Solo and Duo ASIO not VM?

He did that already, as reported in the debug dump.