@ramdor Richie-- the Two Tone CAT command is broken. Two Tone is set to "Use Drive Slider". TUN is set to "Use Fixed Drive". Using the 2TON button on the UI works as expected: drive power is achieved. Using zztu1; 2TON is produced at the tune power setting. If TUN is changed to ...

AN UPDATED PRE-RELEASE 2.9.0.4 There is a test pre release over on my github. If you have tried any previous 2.9.0.4 test release then you will need to un-install before installing this new one. https://github.com/ramdor/Thetis-2.9.0/releases/tag/v2.9.0.4-pre Skins : W1AEX Rob Skins - http://www.w1...

yes, it would assign a lower shift for all bands that have been set as 10 or above. So one would need to adjust all those bands.

It can be worked around, but instead of a 5 min job, it becomes an hour+. The seemingly trivial often are not unfortunately.

R.

K1LSB wrote:Not sure if this is the correct place to post this, but how can I get the RX2 S-ATT value to be band-specific like RX1 S-ATT?

Thanks,
Mark

it is broken atm, looking into it

Thanks for all the wants/wishes. Some are easier to implement than others. Take the 5Hz step size for example. On the surface it looks trivial to implement this, just insert it into the list right?. However, Thetis stores the stepsize as the index number into that list. So everyone that had 50Hz sel...

message received RE: posting that info here---i just assumed this was the right place to so my apoloiges for that. Thanks Richie! best PM tbh, as the issue may be just that the code is in a state of flux, or add the issue over on github. Yeah i have fixed that issue just now, and the <FW> title bar...

ok, there is an issue, quickly discovered perhaps related to the issue you reported Cory. If you are in collapsed view with RX2 enabled, resize the window, then turn RX2 off, RX1 waterfall is not correctly resized.

R.

On 22b(test) with the display in collapsed view with RX1 only active and change the bottom at all from Andromeda buttons to others or none then activating RX2, the RX1 waterfall draws over the RX2. Appears to do with either top display option. Could only replicate this by making any change in the b...

JJ4SDR wrote:Thanks Richie! Yup....I am using P1, Thetis version that came with my radio still

Yeah, you need to install a new version

Richie.

Joe wrote:I don’t know what to say, that was fast

well, not that fast, about 3hrs to implement this morning.

Richie.

Great on the PA alignment feature. Is it anyway possible that say if you only want a max of 50 watts as your example was 20 watts and you scale it as such that you could display the slider as 0 to 50 or the max you want in watts instead of the 100 percent slider display? This would work very well w...

-since the noise floor is known and display-able with a line (nice feature) can you not automatically set the bottom of the pan display to be at that level (maybe +3 or 5 or settable offset)? Noise levels change day to day and via direction - it would be nice to just have the system constantly move...

New PA Profile System - Revisited I set my 7000 max output on 80m to 100w when the drive slider is at 100. However when the drive slider is moved to 50, I get 60W out, and not the 50W I expect. A new feature will help to resolve that issue. Watch the demo here : https://youtu.be/PlkBoOA5rfQ 73 Rich...

DH1KLM wrote:Can anybody confirm this, or is this already known?

yep, this I have seen this since 2019. The average values were not pre-initialised for RX2, Fixed for next release.

R.

Regarding the adjustment of the limiter in the tune and drive sliders... Sometimes it can be difficult to set a precise value of the limiter (red bar) with a right click + drag gesture Suggestion: 1. Set the value of existing head/knob using mouse wheel 2. Right click + drag should be limited to on...

BTW, There have been one or two fixes since 2020.



Yep, old version as per the screenshot......

yeah the OC options part got done, and I did find out at the time that we couldn't do anything with the PTT key rca unfortunately

R.

This was marked as done in version 21j someone else's 21j perhaps, but not mine. I have wanted this feature myself tbh. The xPA and TX pin actions are related to the OC outputs, not the PTT Key Out RCA. Richie. 21j2 add: options to include VACs when MUTE is enabled, for both vac1 and vac2 (Setup->A...

PA Profiles

https://youtu.be/BTAexD4fhUA

soon

Richie.

Ok. My guess worked. Based on other controls... ptbTUNE-head and ptbTUNE-back Cool :-) entirely at your own risk by running code that is not in a stable suitable state and actually contains partially implemented code. A commit to my repo does not mean it is in a good state ;) but well done on getti...

Able to get code, build, deploy, operate. Have the features, but what is the name of the slider I need to add to the skin for the actual slider to show... (I can right click in the area and see the red bar...) I know... should be able to find in the code the name of that skin component perhaps... W...

updated skin packs that include graphics for the new buttons

additional ones for IK3VIG : https://bit.ly/3J2VCtx
W1AEX Rob Skins - http://www.w1aex.com/hpsdr/hpsdr.html
OE3IDE Ernst Skins - https://www.oe3ide.com/wp/thetis-skin/

m0cpy wrote:PM over to you Cheers Richie.

nothing in PMs in here, or in email

Richie.

Hi Richie. I've had a look at the PA setup and all the other bands seem fine doing what it should to alter the power levels it just seems that 10m doesn't want to play any ideas. Cheers again Andy M0CPY odd Andy, can you send me your database.xml file? It is stored in C:\Users\<user>\AppData\Roamin...

m0cpy wrote:There seems to be a problem with the PA settings for 10m there is no adjustment the pa is flat out all the way.

all the others seem fine with the other bands. Cheers great development with the software Richie

fine here,

checked your PA config for 10m?

R.

possibly worth adding in the pinned locked thread

under Beta link

Beta discussion : <this thread>

Richie.

i didn't read that, sorry. I live in here (mostly)

Richie.

I've added a link to where you can find the beta versions here: https://apache-labs.com/community/viewtopic.php?f=9&t=4133 I would prefer it not there, as discussion about anything 'update/test' related will now also arrive in that thread. You could always pin this below the 2.9.0 pinned thread...

Thanks Richie. Normally with JTDX I use DIG mode and CAT Thetis mode select will normally override this so may be a TCI issue. I also see inconsistent TCI communication with with my RF2K amp where I had TCI running for a few days and now it refuses to work. For now I'll revert to CAT until TCI beco...

the changes to the tune/sliders etc is not complete so you wont find it. wip code, but not a working build. Sometime during the week probably. Have not had time today to get back to it.

R.