Scott, One thing I don't understand is why you're using "Voicemeeter Virtual ASIO" as the ASIOdrivername value, as the instructions say to use the ASIO driver name (in my case, that would be "MOTU M Series"). "MOTU M Series" is the driver, while "Voicemeeter Virtua...

Thanks Scott, I'm pretty sure that's what I've done (per your instructions) but for whatever reason it wasn't working as I expected. If memory serves (which is not guaranteed at all), I was getting mic audio into Thetis but it wasn't being modified by any of the controls in VM Hardware Input #1 (EQ,...

I'm struggling to get mic audio from VM Potato into Thetis for TX. How can I get my condenser mic audio from Voicemeeter Hardware Input #1 into Thetis without using VAC1?

Screenshots attached

Mark

Then I'm confused. I'll play with it and see what I can make work.

Thanks,
Mark

Scott, can you please post a screenshot of your VAC1 setup?

Thanks,
Mark

Thanks, Scott - I was hoping I'd still be able to utilize VM Potato, as I'm using VMP's Hardware Input IntelliPan EQ and Reverb for tailoring my mic audio and I didn't want to give that up. One question, I haven't been able to find any Thetis mic audio level adjustment that works after I enable cmAU...

Richie, thanks for the enable/disable switch for the MultiMeters, I've always wished I could hide my meters without having to delete them.

Mark

Thanks Jay.

Mark

Jay,

When you say "terminated", what do you mean, exactly?

Mark

I used to have the Klipsch ProMedia II, great little speakers. I had them plugged into my computer and just sent the Anan audio to the computer via VAC.

Mark

Per Paul's (W9AC) post in that group, "With DPD engaged, the target ALC voltage at the ALC jack is replaced with a target sampled power or RF voltage level...Among other FAQ issues, what must be confirmed is the minimum and maximum level at the IC-7610 ALC jack with DPD activated." Not sur...

Ron,

I've always seen the same thing at my station, I just always assumed it was leakage/crosstalk internal to the Anan.

Mark

Rafael, that's the question. Is the band pass filter really grounded? Can anyone on the forum verify that it is? Ron N4XD Reason dictates that there wouldn't be a "Gnd BPF2 on tx" checkbox if there was no functional selectable grounding. Regardless, there's an easy way to test: set TX pow...

IMO the safest arrangement would be to have a configuration similar to N3GX's Isolator relay (see his illustration above), except that the relay type should be DPDT and the jumper feeding the Anan's PTT-IN should be actuated by the 2nd throw of the relay. That would be a fail-safe arrangement guaran...

John,

I know the feeling, lol.

Mark

If you could previously hear RX audio through your headphones but can't any longer, you've changed something in the VAC settings and need to revisit your VAC Settings page. I have a folder of screenshots of every Settings page so if I ever fat-finger anything I can get back to the configuration that...

w9ac wrote:In each case, I have NOT deleted old Thetis versions when installing/re-installing -- I'm overwriting to avoid creating new meter containers.

Uninstalling Thetis does not delete the database. The updated Thetis session should retain your previous configuration.

Mark

Mic audio sounding like a rushing waterfall is indicative of too much gain somewhere, perhaps Mic or Leveler or ALC Gain or Compression. Suggest you back all of your gains down, then start increasing them only as needed.

Mark

JJ, Interesting that you should ask that, as early on I decided to add an extra layer of RX2 front end protection to my Anan. My RX2 antenna is a wideband receive-only mag loop assisted with an LZ1AQ amp mounted at the loop. I rigged up a DS2Y relay at the LZ1AQ amp that physically disconnects the l...

Revised Timeline: We want to be transparent about the timeline moving forward. We anticipate receiving the updated pallet card within the next 8 weeks, and the upgraded heatsinks are projected to arrive within 6 weeks. With these essential components in place, we are targeting to initiate shipping ...

Richie,

Very sorry, I misunderstood!

Thanks for clarifying,
Mark

Richie, I have a couple of feature requests, if doable:

1) Master AF slider controls VAC RX audio volume (not the same as "locked to RX1/RX2 AF sliders").

2) VAC2 Output enabled thru ASIO.

Thanks for everything,
Mark

In fact that same information was posted in this very thread on the same date:

viewtopic.php?f=3&t=4650&p=26162&hilit=BTS500851TMAATMA1#p26162

Mark

Thank you Richie. Is it okay to just install this over a previous v2.10.2 build?

Mark

Running a severely undervolted and under-clocked i9 laptop here, Thetis is reporting between 1-3% System load.

Check your Task Manager to see if there's something else going on.

Mark

+ Also sent several letters, no answers at all.... Order Number: AC-3915 Order Number: AC-4089 Im ordered 12/2022 !!! wtf? :cry: If lead time is 3-4weeks, where is this guys unit? Any update, have you received your G2? Exactly what unit did he order? There is no specific info in his post to go on. ...

Vin, I don't think your problem has anything to do with your antenna, IMO it's more likely related to RF grounding in the shack. My own antenna is a multiband dipole 40 feet directly above my shack, so all of my equipment is deep inside the near field of my antenna and is unavoidably being slammed w...

All of my multimeters are looking good, thanks for everything Richie!

Mark

Update: Doug found a bad PA final in my radio, he replaced both finals and PS is working fine now on all bands.

Here's PS on 20 meters at 41 watts, internal sampler (curves are very similar at any power):


Thanks to everyone in this thread who offered their assistance.

Mark

I certainly wish we could find some work around for this problem. Terry GW4NNO You have it... Its Thetis 2.9.0.31 :D Steve's 2.9.0.31 (and 2.9.0.29) had a problem with AM RX audio, at least for me. I was hearing a 750-ish Hz tone in received AM/SAM audio. The frequency of the tone didn't vary but t...