rdwing wrote:Not sure where the best place to add a feature request,

here : https://github.com/ramdor/Thetis/issues

Resolved via email, but after some head scratching, the VAC was turning back on, even though the profile was stored with it off, because of the 'Auto Enable' setting 'Enabled for digital modes, disable for all others'. As a side note, this setting is actually stored against the profile as well. Conf...

vu2mb wrote:if you need I can post a video

yes please, and send me a copy of your database.xml and ErrorLog.txt from inside C:\Users\<user>\AppData\Roaming\OpenHPSDR\Thetis-x64

Do not use DB export button, just shut Thetis down, and send me the files from the location above. Email over on qrz.

Cheers.

UPDATE

v2.10.2 pre-release4 over on github

https://github.com/ramdor/Thetis/releas ... rerelease4

This will hopefully be the last pre-release before final in a few days after some feedback

Cheers.

@I2NOY S-untis are shifted by 20db when >= 30MHz so -93dBm will show S9.I have just made some changes to MultiMeters so when they are zeroed they always bottom out at S0 when power is off, ie -153dBm when >= 30MHz. Previously they were getting set to -133dBm irrespective of frequency above/bellow 30...

@Don, updated. Grab it again and re-install. Let me know if that resolves it. Cheers.

yeah, line of code entirely missing to put them back, it was either a CTRL-Z moment, or lack of sleep, or both

Will update the msi shortly.

@don, was this from a fresh start into collapsed? and then you went to expanded? what was the order of things for it to happen? and did you use the checkbox at all in setup to turn them off? EDIT: yes replicated, for now, just tick on the box in setup form under setup->appearance->Use legacy meters

v2.10.2 pre-release3 is up on github

https://github.com/ramdor/Thetis/releas ... rerelease3

Cheers.

@George, thanks for that There has been very minimal CW testing with all the rit/xit/split changes, and it looks like this one slipped through. Fixed now though. I will update the msi installer package later/tomorrow and msg here when done. Cheers.

With regards to the orange box that appears in setup if a TX profile related setting has been changed and the profile has not been saved. In the final release of 2.10.2 you will be able to click that orange box to get a report of what has been changed.

Thank you Richie! Version 10.0.2 pre-release has been running smoothly all day here. 73, Rob Good stuff. I am making a few other tweaks and adding a couple of things before final release. I will let this pre-release run until next week sometime and replace with a final. I think this has generally b...

@james, the flashing red and/or yellow blocks in the top left of the spectral area signify two things : red: The last frame was not able to render in time to maintain the required fps. The odd flicker is fine, but if it is on more than off, then you need to reduce the fps, or turn off things like fi...

Ah that is good news guys. Thanks to all who sent DBs for this issue. Hopefully we have seen the back of it now with this prerelease.

Cheers.

Hi,

I have just released v2.10.2 pre-release4 over on github.

https://github.com/ramdor/Thetis/releas ... rerelease4

Cheers.

Hey all, I have read through this thread and tried to replicate the issue regarding last used frequency etc when restarting Thetis or moving to a new band(stack) and then back again. I am unable to replicate it at all, and have checked the code related to it but have not seen anything obvious. It co...

Sorry for the delayed reply chaps. There is a button in the setupform->General, called 'Firewall Check'. When thetis is run as admin and this button is clicked it removes all firewall rules related to Thetis.exe and re-adds them back in. I have just added the Private profile as well, which now mimic...

The transverter bandstacks do not have default entries, and the default setting is to return to last used. Consequently it will always return you to start of band when you peform a band change if you have no updatable stack entries. Depending on config you can have it update an entry, return to a fi...

Cheers all. If I get the 'bug' again later in the year I may have a tinker ;) All issues/bugs can be reported over on GitHub, and/or posted about here on the forums for discussion. I wont be personally fixing them in the short term unless a game breaker. Scott will be locking this thread at some poi...

Hey all, I have updated the github repo and made a final release of 2.9.0.8. If there are any big problems/gotchas let me know via github issues. Please read the change log. Invites to a few others have been sent out to my repo so fixes/changes can be made if needed. I wont be doing any more to Thet...

Using the import function in the settings window will not pull in PA or MultiMeter config to the database that is currently in use. I will need to add some sort of popup that asks if you want to replace/ignore as importing or 'adding/appending' these settings to what is already there is not somethin...

there are some gpu threading changes in test release versions of 2.9.0.8 that a few people are testing. This has fixed some flickering in meters that had been observed (not happening in the main spectrum area). This will be out for testing next week sometime when I have looked at the export/import d...

Where do these meter configs get saved? I just did a db reset and then imported my last good one and the meters containers did not get imported. And not sure if this is related but the import did not bring back the PA profile settings either. Import not implemented yet. Will sort that out next week...

main spectrum area flickering, or meter containers, or both?

R.

Erik, as long as they are enabled (right click them in spectrum to check), and you have the global on/off 'switch' turned on by selecting the MNF button down the bottom of the screen then not sure why it is not working.

I think it is something to do with the 'hooking' of directX so that external software can use overlays and the like to show cpu/gpu/temps etc or to grab the contents for recording etc. I guess some are better implemented than others. All overlay stuff is working fine here with game ready driver vers...

Tony EI7BMB wrote:Hi Richie, yes the bar meter works as it should as long you you don't try to resize the container. Also the meter continues to work even after the error message appears.

can you drag it around in docked view, as long as not resized?

Note that I am not using any of the old fashioned analog meter representations, only the standard meters. Indeed, the problems start just creating an empty container. Cheers! Scott it happens if the container is left 'docked', ie as soon as you add a container? 1) add container, do not resize/touch...

I'll be around tomorrow to look into this. May have to take you up on the offer Scott to remote in and check what is happening. In the mean time one thing to try is clear the directX shader cache. Cleanup tool will let you do this (make sure Thetis not running and ensure no lingering in taskmanager)...

@scott, if you have been using other versions, can you try with a fresh db? probably wont help, but just a stab in dark atm. In about an hour I am away from here, so will have to wait until next week to track this resizing issue down.