Using VAC1 and VAC2 constantly on 2 antennas no problem all last week with resample off. Yesterday I was able to edit the bad database to turn both resample settings off and program restarted fine. I have screen shots of both VAC1 & 2 with and without resample on. Just now I turned resample on o...

No joy yet tried several changes and still cannot restart PowersdrMrx after the first time when I turn on resamplers . All good until I restart the Powersdr Mrx. I have: Reconnected my USB Microphone and Hercules DJ controller.--No change fresh database again. Tried disabling drivers for DJ Hercules...

I do have some devices that are currently disconnected or powered down. Will see what is in the list and reconnect or delete and test. Not a Thetis issue after all. Just timing of Thetis update threw me off ! Will report when I fix it. Thanks Tom KA1GXRrrrr

Your attenuator is set 0 DB? Try 20 DB attenuation. There are known power supply artifacts in the 8000 although mine may not look like yours. at 20 db it may disappear into the noise.


Tom
KA1GXR

Finally got time to troubleshoot. I have not gone to assigned IP yet as you suggested. Without ever powering up Thetis 200D radio or Thetis software I start with default database on PowerSDRMRX and startup fine. What I found after restoring good database more than once for the 8000 is if I turn on r...

I am sure DHCP is what I have now. I will make sure my router is not assigning the same address to both first. After checking that I will try the fixed IP way you suggest. It appears to me the 200D on Thetis is trashing the 8000 on P1. The 200D continues to start and run fine after running 8000. I h...

Sorry about the caps-my eyes find it easier to read. I am using 8000 on P1 Power SDRMRX only and 200D on P2 Thetis only. I can not find a similiar database.xml file that Thetis uses in any directory known to me or perhaps it has a different database format. My radios and PC are on a common 1GB switc...

PC is Windows 10 all updates done. !6GB memory I7 4ghz. I use 200D on Thetis latest firmware with no serious isssues. I use V3.49 powersdr latest firmware on an 8000. I had been using both radios fine with Thetis older v 2.53 on the 200D. I noticed the newer Thetis version last week and installed it...

One thing you can do: Run 1 radio on standard protocol HPSDR and 2nd radio on Thetis Protocol. I do this: 200d on firmware for Thetis installed and run on Thetis on same PC with 8000 running original protocol and firmware. This may stress the abilities of some PC hardware. Using I7 on16 gig ram 4 gi...

Tom I am running protcol 2 and Thetis. The sketch upload seemed to complete with no errors. Does your 8000DLE show version 1.06 on the display or 1.06B after the firmware upload? If yours shows 1.06B then my upload was not successful (Although the SSB SWR error issue was addressed after the firmwar...

Upon receiving the 8000DLE and getting it operational I noticed the rig had high sensitivity to SWR on SSB. Downloaded the SWR sensitivity "fix". Seems that the issue is corrected for SSB. However just tried a long run (many contacts) on CW and found the SWR sensitivity issue still very m...