w-u-2-o wrote:Wow! Impressive!

It is a bit easier to find things, but things are every where in setup and could do with a bit of a re-organise really. We are now able to get a popup for the IPv4 addresses on the computer as well.

Ernst (oe3ide) tells me he does not have the amp, but included images he found in a manual. However, there is a pre-release on my gihub which adds options to emulate expert electronics radios. It may help and resolve the issue depending if the amp firmware looks for a specific radio/protocol. Please...

My center mouse button on my trackball no longer can set a MNF since the update. What am I doing wrong? ctrl right click to add 200Hz ctrl shift right click to add 100Hz middle mouse to enable/disable a notch shift middle to remove or +MNF button to add in passband you can also right click on a not...

I have looked at the code again Norbert , and refreshed my memory on it as it has been a while. I will change it at some point to have a button to clear them, but it will take a bit to code the changes. I understand the frustration with it. I have added as an issue to github, so will be changed in n...

If the firewall passes the check, then a few possibilities a) amp is expecting command that is not implemented in Thetis b) amp is expecting device name from Thetis to be sunsdr ( I could add a fake option in thetis easily enough) c) issue with TCI in firmware version you are using on the amp Richie.

ok sounds like you have everything setup ok as long as you are using your PC ip and not 127.0.0.1 in Thetis TCI. Other than perhaps testing the firewall with the 'Firewall Check' button in Thetis setup-General-H/W Select. Failing that there is probably something missing in our TCI that the amp needs...

Setup process : 1) do you know the IPv4 address of your computer? You can find this by looking in windows network settings , or running ipconfig from cmd line prompt and making sure you use the correct ethernet adaptor. For example it might be 192.168.0.26 2) once you obtain the IPv4 address. then t...

127.0.0.1:13013 and server running. Just curious, 13013 is the default IP port for TCP/IP (set on CAT tab) and the default port for TCI is 50001 (set on User Interface tab). I originally had this confused when I was setting up, so just wondering if you re using TCP/IP CAT vs TCI CAT? yes good spot ...

TCI and RF-Kit, has anyone got the 2 talking yet? I am having no luck here. RF-kit has TCI installed, pointing at the Anan/Thetis IP and port. Thetis 2.9.0.3 Thetis is set for default,, 127.0.0.1:13013 and server running. No traffic in log window. What am I missing? Thanks W2FMU you have bound the ...

I don't know Mike. Back tracking through the code they relate to byte 30 + 31 of the high priority status packet (1025) which are currently documented in the 3.8 manual as unused.

edit: I have not seen them change, perhaps debug/testing at some point, not sure.

Richie.

yep Warren had made the differentiation between alc and alc group in his email to me, I just reworded slightly in parenthesis The “real” ALC meter will never exceed 0dB. I believe you/someone may have implemented a “hybrid” ALC meter that shows true ALC output up to 0dB and ALC compression above 0dB...

PureSignal Feedback colours - what they relate to Warren recently sent me some info regarding some of things related to pure signal, and said it was fine to post in the forums. Feedback colours referenced in his comments are standard colours and not the reversed/inverted where blue becomes red etc....

What is the black box in the CFC window for? It is a very basic display of how much dB compression is being applied to the frequency range defined for the cfc. With single power forced to a narrow frequency it should peak at approx. value that is seen in cfc comp tx meter. It is only in use when TX...

This is just an FYI post, I'm not complaining just passing along some info. Just installed 2.9.0.3 and all seems to be fine. I configured TCI with Log4OM & JTDX, the CAT I/F is working. I turned on TCI logging and both Log4om & JTDX are sending/receiving commands. The problem is my RF2K-S a...

Tapr releases

2.9.0.1 was missed out because I had used that for 22a

2.9.0.2 included the dll + windows7 changes but missed out the broadcast/split changes

2.9.0.3 included all from 2.9.0.2 plus the fixes for the Broadcast cat issue and the split duplication problem from my 22a

Richie.

Just a heads up, v.2.9.0.3 was released over on TAPR last night. It is at exactly the same stage as my 2.9.0.1 22a release. It includes the fixes for the broadcast cat issue, os version check and the missing dll.

Richie.

100D users. Do you have, or have you seen this issue? https://github.com/ramdor/Thetis-2.9.0/issues/14

Richie.

w2ner wrote:Well, like always Richie, great work and many thanks!! It would be great to see an analog type meter like the one in the Sunsdr.

yep, I will be returning to working on the meter stuff at some point next week. Just sorting a few bugs, and generally letting things settle.

Richie.

Dan wrote:I have installed 2.9.3 64 and it is working very well.
Thank you Richie.

73, Dan KM6CQ

good stuff !

R.

I did. It is probably VC143 (C++ 14.3 runtime) being installed as part of this version or the WiX installer needing to do something. Doug may know, but I do not have any experience of the WiX installer tbh.

Richie.

ah no worries I didn't know either, or my bro, who is also a dev. (can't get him involved in radio or c#... sigh). There are work arounds in that linked doc.

Richie.

Minor nit: when importing my previously exported transmit profiles into a reset database, the Windows file selector dialog that pops up does not show all mapped drives. I have two physical drives, C and D, and those show up OK. However the drives mapped to my NAS, Y and Z, do not show up. The work-...

w-u-2-o wrote:

ramdor wrote:btw, current ongoing issues are tracked here https://github.com/ramdor/OpenHPSDR-Thetis/issues

Richie.

That's great, Richie. Is it OK for people to post issues there if they have a Git account?

yep !

btw, current ongoing issues are tracked here https://github.com/ramdor/OpenHPSDR-Thetis/issues

Richie.

Thetis installs and runs very nice. Thanks Doug and Ramdor! Edit: Using Region Germany and check Extended clear all bandstacks. FCK! Absolutely annoying! I need extended for my transverters! you have been warned.jpg It's a useless feature! In your opinion ;) It has been there for 9 months. I can wo...

Yes, the blue bands are there, no problem with that. But in previous versions the bandstack for 60M already contained 5 entries to let you skip through them easily. Not a big deal. is this accurate for the US? (the 2800 is bandwidth) us60m.png and these for region 2 ? region2_60m.png Richie.

w-u-2-o wrote:Starting with a reset database, US region, no previous bandstack information, I also see the same behavior on 60M, and also redid the 60M bandstack to what I wanted.

you dont see the blue bands?

Richie.

The 5 channelized frequencies for 60M didn't make it either. Shows 5.354 only. Set and locked them manually in Band Stack. Did you have them set up previously in bandstack? The overlay (blue in my case) in the display is based on region and not linked to bandstack. In fact, if you change region, it...

yeah it is a jtdx TCI issue tbh. I've done loads of testing in 159, hammering split etc, and it crashes very easily. However, a test app in place of jtdx copes with it no problem. Hopefully they will resolve the issues and probably related to the potentially non sequential nature of TCI, in other wo...

Hi Richi, And another issue: Sometimes in "CTUN-mode" the filter window is moving in the oposite direction of the mouse cursor. But I didn't find the rules for this behavior. 73 Josef (DL5TT) yes I have seen this as well Josef, infrequently. It is on my 'to investigate' list but have not ...