Ok will give it a go. question does Thetis use the two digital inputs to the 7000 ? Regards Bob VK4BXI Bob and everyone else: this topic is for discussion of Richie's improvements, any bugs associated with them, and wish list items ONLY. This topic is NOT to serve as a single stream of consciousnes...

Curious about QSK: why would would the record feature work but not when I am in semi-break mode? Because the audio stream that goes to the recording function only contains the output of the receivers, not the sidetone. Paul beat me to the post :D but here's some additional information: The sidetone...

That's very pretty, Richie. Is the next step a bar graph style multimeter?

There are a great many sound settings in both Windows and NoMachine. You have to select them properly in order for sound to flow in either direction. It appears that the defaults worked in one direction, but not in the transmit direction. You need to look at your settings in NoMachine specifically. ...

This is the correct place. I'd actually like to test this, but I can't get NoMachine to work properly. Every keypress on the keyboard activates the numlock key on the remote machine. Setting up the display is pretty counterintuitive, also, but at least I beat that into submission. Just guessing: one...

Terry--have you considered a larger, higher resolution monitor? You can make things very large on, say, a 32 inch, 4K resolution monitor.

OK,now I am more confused than ever. Are you saying that I can't have the radio running using Thetis ,at the same time that I have the controller connected via the switch and running ? That is correct. The openHPSDR architecture does not support more than one client at a time connecting to the hard...

Hi Dave, On my 200D (as on your's most probably) there is HF power on the transverter TX output when transmitting on ANY HF band. I had to put a 28 MHz band pass filter on the HF input of my home made transverter to correct this mess somewhat. This is why I'm considering more and more to abandon my...

I wholeheartedly agree with John. When monitoring a multiplicity of values simultaneously, the bar graph format is by far the preferred approach, if not the only approach realistically possible. Overlapping needles are impossible to read once one gets past two values on the meter. This is true for b...

1. Installed Thetis 2.9.06 on my PC and Notebook, in both cases the "Tune Power" slider is missing. Displayed setting is stuck on 50. Any time a new button or slider is added you need to update your skins. Sigi has created a wonderful tool to make this task much easier: https://apache-lab...

Phil, Reliable timing closure in the firmware under all conditions remains a concern. The situation seems better overall with the newer hardware (Orion, Orion MKII), and seems to be worse the further one goes back in time, hardware-wise. Nevertheless, thanks to the fantastic effort by Rick, N1GP, th...

You are not trying to run Thetis or PowerSDR on the built-in PC at the same time as using piHPSDR on the Controller, right? They can both be attached at the same time via the switch, but only one client software app can run at a time.

LOL! I was about to want/wish a button that could activate another bank of buttons I can include on my second monitor...Not really.. A macro button strip or sub-window has already been on the wish list for some time. By making them macro buttons, i.e. buttons you can simply type CAT strings into, t...

1. I would like to see the "RXBYPASS on TX" checkbox available on the GUI instead of the setup screen. I (and others) have to check/uncheck regularly when going QRO. Why do you have to do this when QRO? The external coupler will work perfectly fine to feedback the output of the ANAN even ...

Scott, what causes the difference in CPU usage by Thetis between systems with seemingly similar hardware? So far nobody has come up with any good ideas on why a small group of people observe higher CPU consumption. My guesses are focused in on some sort of problem associated with CPU instruction se...

Even the most powerful Nvidia card won't help as there is no GPU processing involved in any of the DSP code. Even the cheapest DirectX capable GPU easily handles the display processing.

The WB display has only enough code behind it to just barely show that the WB data stream coming from the firmware works. Do not expect very much from it at this time. While the WB display is therefore ripe for many improvements, also remember that the preselector, any antenna tuners, and the antenn...

Thetis is not the same as those other apps.

channel master.dll runs with an internal, non-adjustable buffer size of 64. It drives the train. Everything else is lost in the noise.

Low buffer sizes will not cause increased CPU usage.

That shape shows that you are absolutely hammering the amp, your drive level is way too high. At 70% of your selected drive level the Henry becomes fully saturated and can deliver no more power. This is a badly nonlinear condition. It is impressive that PureSignal looks to be dealing with it to a la...

Yes, 20-30% for just the process is much too high in your system. Thetis loves cores more than anything else. We are all running modern i7's. With my 4 core CPU I'm right around 10%. Ernst has an 8 core and he's right around 5%. So with your 6 core CPU you should be somewhere in between. Anti-virus ...

Thanks Ruben!

I don't use record and playback, but my understanding is that on playback of ANY recording all audio processing is disabled. It doesn't matter if it was audio recorded off the air or audio recorded via the microphone, Thetis has no way of determining the source of the recording. This was discussed e...

You need to be much more specific about what CPU reading you are talking about. Total CPU? Just Thetis? Measured how: Thetis, Task Manager, ResMon, or Process Explorer? Every single one of those measurements will be different. Also, although it won't make much difference, which i7? There are 12 gene...

What happens if you uncheck Bypass?

When tuning, especially with an autotuner like the KAT500, there may be times when the mismatch is quite high. This can lead to reflections and RF currents flowing on the shield of the coaxial cable. These currents can then cause RF to radiate from the coaxial cable or to be conducted off the shield...

If you are using a SmallIR then why is there a KAT500 antenna tuner involved at all? There is no antenna tuner required with that antenna. That could very well be a major part of your problem.

I'm with Richie regarding any shoddy workmanship or design. Sadly, pragmatism might rule out over ceremony in terms of having a radio available. Anyhow, I reiterate my previous recommendations: ferrites chokes on the coaxial cable, ground your station, and switch to a Logitech wireless keyboard and ...

It is best done through the computer. Remember that Thetis is 90% of the radio, and certainly the brains of it all. Disclaimer: I've done this a bit differently, and only with the KPA500, not the KAT500, so some of this is a bit of a guess... Elecraft equipment knows nothing about Thetis (or PowerSD...

You asked this question already and I already answered you. I can only give you the answers, I can't make you read the posts or do what they say

See here: viewtopic.php?f=9&t=4131, specifically my post from Sun Apr 24, 2022 9:19 pm