I've merged these two topics and made the title a bit more descriptive.

This is some very strange behavior. I wonder if anyone else is seeing this? I looked for it myself and I don't see that behavior here (ANAN-8000 into dummy load).

There was an identical sounding topic to yours just posted: https://apache-labs.com/community/viewtopic.php?f=9&t=4215 His solution was to reset the database. If this works for you I'm going to combine the two topics. Normally I'd put this into the "Everything else" sub-forum because i...

Please forgive my ignorance, gents. I'm not a CW operator, nor can I hear what my 8000 is doing since it is located in a rack two floors beneath my operating location even when I pretend to be one!

Isn't this all a lot of effort when you can just switch to QSK and be done with it?

Paul I do plan to make the changes per your info. I am portable in NM using an Elecraft K3 as the rig. Spoiled by its soundless keying. No idea why Apache labs didn't go the pin diode route. Not only noisy but, using the internal keyer, I found needed large delays to keeps from hot keying. Not at a...

I agree, it's an overly complex system and can be confusing. This is why I now recommend Bootloader as the single method: it is universal and requires the user to learn only one tool and one procedure. It would be great to see the functionality of both programmer versions simplified, automated, and ...

Thank you for the very kind words, Mark <blushing>

I have moved your post to its own topic in the Firmware Upgrading/Downgrading sub-forum since your difficulties are not specific to 7000 firmware and your post is not discussing issues pertaining to the firmware itself. 1. You do NOT need to go inside the 7000 to move a jumper. You should be using t...

I recommend you leave the Orion MKII board alone and instead cut and jumper the so-called rear panel "spreadout board" (what most would call a breakout board), which is the board that holds the six phono, two speaker and one DE9 connectors on the rear panel. That board has a header connect...

CW Skimmer can use straight audio, although the bandwidth is more limited. So you could switch to regular audio, then split the audio using Voicemeeter or VB Cable into both CW Skimmer and Bandicam. Another alternative would be to set both RX1 and RX2 to ADC0, turn on VFO sync, then use the VAC2 out...

There will be no problems with this, for the reason that Mark already gave. Instead of what he did, your friend could very have easily provisioned a 3dB splitter (not a T, but a real, low loss, hybrid splitter) on the amp coupled output. Example: Mini Circuits ZFSCJ-2-1 . There are usually lots of t...

Allow me to clarify: NR2 engaged 100% of the time for phone modes only. I never use noise reduction or noise blanking when running digital modes.

During the extraordinarily rare times I use NB2 (never NB), I use the default settings for those values.

One thing I forgot: in Seutp > DSP > NB/SNB, make sure that NB2 MODE is Linear Interpolate. That is far superior to the other methods, and makes all the difference between NB and NB2 modes.

If you search the forum you'll find there's been some discussion on this in the past, but nothing definitive ever came of it: https://apache-labs.com/community/viewtopic.php?f=6&t=2649&p=4533 https://apache-labs.com/community/viewtopic.php?f=6&t=3429&p=11498 There are a lot of differ...

Ok, thank you for information, i hope this cable is for ANAN 7000 Will be ok, https://www.microham.com/Downloads/DB37-FX-5000.pdf If you read what Volker wrote, and have looked at the connectors available on the front and back of the 7000, you will clearly see that that cable will not work without ...

We can't see all your settings in those videos. Particularly your AGC settings. It would be good to see a screenshot of Setup > DSP > AGC. It would be better if your videos showed the normal main UI in its entirety. On the "VK3AMP, VK3PT, VK5TT on 80m" video the G line looks fine. On the &...

This is a great place to post it. The other topic got locked because people were using it like a mailing list, not like a forum. We can roll the bugs into a new topic when Richie comes up for air as he is deep into metering code right now. Also, a lot of people have difficulty discriminating between...

With regard to the cut off voice keying: take a look at N1MM setup and make sure it is set to properly key the radio through Thetis.

For CW see this topic: viewtopic.php?f=16&t=2629

In particular my post of Mon Jul 02, 2018 5:35 pm.

We don't currently have a topic for wants and wishes. I had to lock the last topic because people were using it as a mailing list. I recommend just hanging on to it for now and when Richie resurfaces from his work on meters and starts a new topic then that will be a good time and place to post it.

As you have surmised, the PA profile is not tied in anyway to the transmit profile. You have to manually change either or both as required.

Hi to all, before i receive my order anan 7000 dle, i'm tryng to connect anan 200 d to N1MM, Thetis to N1MM log, but my sound and cw massages can not transmitt, cat switching but my audio files not transmiting do i need any virtual audio cable donload? if yes what is the version? Yes, you need to i...

Further research on the topic clarifies that NR2 is most definitely NOT spectral subtraction. Spectral subtractive algorithms are probably the simplest class of algorithms one might implement in the frequency domain, by far. While superior to time domain algorithms like LMS (least mean square, defi...

I assume that because my 80m Dipole had a large capture area, it worked adequately for my purpose. Is this a reasonable assumption? No. The reality is you simply got lucky. Since "diversity" in this context = beamforming, you were very luckily able to form a beam in the direction of the s...

It's not clear that both Thetis (WDSP) and SDR Console use the same methods. If you take a look at this topic: https://apache-labs.com/community/viewtopic.php?f=9&t=4018& Listen to Warren's discussion starting at about minute 13 in the video, and also review the two papers Warren cites (atta...

Yes I know, I was playing with ncat just before Ernst released his tool. My idea was togle PTT using just one CAT command, but unfortunately I didn't found a command to do that. Yes, that's typical of the entire command structure. Two different commands for enable and disable of any function. Lucki...

Although I cautioned folks about this in my post on 5 May (see above), people have continued to use this particular topic as a one would a mail reflector. Therefore, until Richie returns to active development, I am temporarily locking this topic. Use the forum as it is intended, please. This is to t...

In addition to Ernst's fine work, you can also use ncat.

Should we move this discussion to the "Macro & MIDI Controller Software, Hardware & Scripts" sub-forum or leave it here?

Is that working a lot better and more naturally for you? No need to shout, BTW. You might consider editing the ALL CAPS in your posts back to upper and lower case. Just curious: have you considered adding a serial port PTT switch, or a MIDI controller, to achieve focus-less control of the radio? And...