Search found 414 matches
- Sun Mar 17, 2019 1:24 pm
- Forum: Amplifiers & Tuners
- Topic: Linear Amplifier ALC interfacing
- Replies: 3
- Views: 7617
Re: Linear Amplifier ALC interfacing
Same response as before Scott..... operator never doing something stupid like driving an external amplifier with 100W. If you have an amplifier with no protection against gross over-drive it would be possible, without ALC, to make a stupid and potentially costly error. As I've explained ad nauseum t...
- Wed Mar 13, 2019 12:40 pm
- Forum: PowerSDR mRX
- Topic: Calibration Tab 7000DLE
- Replies: 4
- Views: 4914
Re: Calibration Tab 7000DLE
I used an XG3 signal source. Easily done when using it. I found as Scott pointed out very little difference - for the majority of users I'd suggest leaving it alone as its close enough - surely much better than other radios! (my Ftdx5000 I use to own literally changed 2 S units with 2 db change in s...
- Sat Mar 09, 2019 1:53 pm
- Forum: Diversity Operations (PowerSDR & Thetis)
- Topic: My Diveristy Adventures
- Replies: 3
- Views: 9533
Re: My Diveristy Adventures
Scott will I'm sure reply about using the system in general. I have never been able to get diversity to work myself but that is more because the antenna selection is critical. I've not had a reference antenna that picked up the noise as loud or louder and still picked up some of the signal. So I end...
- Wed Mar 06, 2019 1:26 pm
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: ANAN-100 low 10/12m output with LPF enabled.
- Replies: 16
- Views: 14594
Re: ANAN-100 low 10/12m output with LPF enabled.
Ed, Just an FYI - I had reported a good bit ago, maybe 6 months, that I had issues with PS working on 6 meters. Turns out I had to have ALEX off. There was a bug, at least for the 8000, that Doug confirmed in testing. I don't know if anything ever came of it but I've run with ALEX turned off from th...
- Sat Feb 16, 2019 1:38 pm
- Forum: PowerSDR mRX
- Topic: ANAN-8000 & PowerSDR - some notes, some questions
- Replies: 5
- Views: 5677
Re: ANAN-8000 & PowerSDR - some notes, some questions
just to be clear the one thing the "Auto" doesn't handle for the waterfall is the width of the display. That would be nice if it automatically took that in to account. As it is now when I go to CW on a noisier band like 40 it is mostly white (bright) ...
Gary
K9RX
Gary
K9RX
- Sat Feb 16, 2019 1:30 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Pure Signal & external amplifier
- Replies: 16
- Views: 17690
Re: Pure Signal & external amplifier
just to be sure since this discussion got off to the coupler and not the IMD results ... the -55 to -60 I posted is my IMD results in db.
Gary
Gary
- Fri Feb 15, 2019 2:16 pm
- Forum: PowerSDR mRX
- Topic: ANAN-8000 & PowerSDR - some notes, some questions
- Replies: 5
- Views: 5677
Re: ANAN-8000 & PowerSDR - some notes, some questions
NB button on TX ... that was one of my findings and subsequent request, to turn off NB(1 or 2) on TX. The issue is, or was, with it on the TX pan jumps all over the place - using DUP(lex) of course. It DOES serve a purpose turning it off and is benign other than making the pan work properly! Waterfa...
- Fri Feb 15, 2019 2:06 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Pure Signal & external amplifier
- Replies: 16
- Views: 17690
Re: Pure Signal & external amplifier
I have an 8000DLE, Expert 2K amp with a Xytronics coupler and routinely see -55 to -60.
Your findings seem low to me ...
Gary
K9RX
Your findings seem low to me ...
Gary
K9RX
- Sun Jan 27, 2019 3:21 pm
- Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
- Topic: Unkey Blowouts
- Replies: 12
- Views: 15743
Re: Unkey Blowouts
Carl - sorry for the off-shoot - which skin are you using? I like that one. Might be nice for a change. I'm using Rob's High Visual which is quite nice.
Gary
K9RX
Gary
K9RX
- Sat Jan 26, 2019 2:38 pm
- Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
- Topic: Unkey Blowouts
- Replies: 12
- Views: 15743
Re: Unkey Blowouts
Re timing - I had an issue where my RX preamp feeding in to ANT3, the transistor blew - and I was getting frequent "HIGH SWR" warnings. I worked with Doug - well Doug did the testing/work and I just tried his results... anyway he found, using a scope on an 8000, that I believe it was Key D...
- Wed Dec 12, 2018 2:29 pm
- Forum: Thetis
- Topic: Quirks with Thetis
- Replies: 25
- Views: 16776
Re: Quirks with Thetis
Just as a note you're reporting something different than what I'm reporting. For me the "Correcting" green bar remains on. I run with DUP on at all times and it is immediately evident that it is not running as the IMD is just ok at best (-30 or so) and the feedback bar is gone - not there ...
- Tue Dec 11, 2018 1:59 pm
- Forum: Thetis
- Topic: Quirks with Thetis
- Replies: 25
- Views: 16776
Re: Quirks with Thetis
Jeff, I've reported an issue with PS stopping ... although in my case it does literally stop working. The button stays on (and I can toggle it off and on) ... the green "correcting" bar is there always but there is nothing in the feedback bar and it is not correcting as witnessed on the ra...
- Mon Dec 03, 2018 2:01 pm
- Forum: Macro & MIDI Controller Software, Hardware & Scripts
- Topic: MIDI Control
- Replies: 6
- Views: 8384
Re: MIDI Control
Harry, I'm using the Behringer Command 2A - love it .... I found early on that I had to, on boot up, have the MIDI panel unplugged (the USB cable at the box), always start PSDR, then when it is up and running start WSJT, then end with plugging the USB cable in to the Behringer and going to the PSDR ...
- Wed Nov 28, 2018 1:00 am
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN 7000/8000 and MMTTY
- Replies: 16
- Views: 13106
Re: ANAN 7000/8000 and MMTTY
Yes - I have heard that MMTTY has a great decoder ... I've really not compared the two so I can't comment there only to say I've worked some pretty weak stuff using MixW ...
Gary
Gary
- Tue Nov 27, 2018 1:29 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN 7000/8000 and MMTTY
- Replies: 16
- Views: 13106
Re: ANAN 7000/8000 and MMTTY
I agree that MMTTY is a bear to set up and seems not to be as flexible as my previous and now once again current choice: MixW. I find the latter to be easier to setup, has a built in log and transfers contacts automatically to my logging program (CommCAT) and has a bandspread. After struggling with ...
- Fri Nov 23, 2018 2:04 pm
- Forum: PowerSDR mRX
- Topic: Stereo Diversity and Split mode operation
- Replies: 3
- Views: 4013
Re: Stereo Diversity and Split mode operation
Joe, Because of the awkwardness of SD I gave up on using it... also I was never able to get a decent SD result using my 85' vertical T TX antenna and the 8-4 vertical RX array. Also I found out, contrary to the schematics, that the ANT3 input does NOT ground the input when in TX - thanks to Doug for...
- Thu Nov 15, 2018 2:02 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
- Replies: 37
- Views: 28817
Re: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
A 'controlled test' of sorts.... I had to reboot the computer, so this time I did not, as I have been lately, set the affinity of PSDR. I left it at all 12 cores. When I run WSJT I get the bubbles/burps about once every 3 seconds - about 10 of them over 30 seconds (just hitting TUNE on WSJT and off ...
- Tue Nov 13, 2018 8:18 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
- Replies: 37
- Views: 28817
Re: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
Indeed.... PureSignal, a superb panadapter, filters that are very steep sided, something as simple as an S meter that works the way it should both in scaling and in relationship to preamps and attenuators ... all things that contribute. I have gotten close to pulling the cord on a new 7610 but all I...
- Tue Nov 13, 2018 2:06 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
- Replies: 37
- Views: 28817
Re: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
Scott.... smiley faces aside, I thought you were getting better in this regard - not denigrating individuals?! The system works wonderfully 95-something percent of the time - but even you would admit it is not a canned radio - it has issues. I have a document that I made more than a year ago with a ...
- Mon Nov 12, 2018 1:41 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
- Replies: 37
- Views: 28817
Re: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
As Scott would say "google is your friend" ... here is what a quick search brought up ("set affinity using WIndows 7"): 1 Press ctrl + alt + del to bring up the Windows Task Manager, and navigate to the Processes tab. 2 Find the program on which you want to set affinity. ... 3 Un...
- Sun Nov 11, 2018 2:02 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
- Replies: 37
- Views: 28817
Re: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
Dick, To set the affinity you need to hover over the task bar at the bottom of the screen ... right click it - select "Task Manager"... then select "Details" tab ... go down the list until you find PowerSDR, right click on it - select "affinity" ... now hit the button a...
- Fri Nov 09, 2018 7:45 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
- Replies: 37
- Views: 28817
Re: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
ok - I see one big faux pas .... you don't have DIGU selected! You're in USB mode!!!!!
Change that - otherwise nothing is going to be right.
Gary
Change that - otherwise nothing is going to be right.
Gary
- Fri Nov 09, 2018 7:43 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
- Replies: 37
- Views: 28817
Re: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
Dick, That is not what I thought you were talking about ... turn DUP on first to see what the actual signal looks like... generally I don't run with DUP off but if my recollection is correct I don't 'see' any issues there... its when I have DUP on, when I'm looking at my actual signal fed back to th...
- Fri Nov 09, 2018 1:37 pm
- Forum: Digital Mode, Rig Control & Logging Software
- Topic: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
- Replies: 37
- Views: 28817
Re: ANAN-200D and WSJT-X/FT8 TX tone on waterfall display mushrooms
Dick, I'm surprised there's not any replies yet ... I'm told this is due to Windows dropping out - i.e. latency issues. I see it here as well and got a complaint yesterday about that very subject. I went from a fast i5 computer to an even faster i7 and it did not solve it - possibly made it worse! I...
- Fri Nov 02, 2018 2:11 pm
- Forum: PC's & Homebrew Hardware
- Topic: LatencyMon Benchmarks
- Replies: 65
- Views: 67522
Re: LatencyMon Benchmarks
Joe, thanks for that - I'll recheck to make sure all is good in that regard. For the most part i've given up trying to get reliable operation using anything other than the default settings. I still have clicks and pops that disturb the FT8 signal as I'm transmitting as seen in the DUP waveform ... d...
- Mon Oct 15, 2018 1:13 pm
- Forum: PowerSDR mRX
- Topic: SNB on RX2 issue
- Replies: 13
- Views: 11090
Re: SNB on RX2 issue
ps: I'm referring to the list you presented on the Yahoo group... not here.
Gary
Gary
- Mon Oct 15, 2018 1:11 pm
- Forum: PowerSDR mRX
- Topic: SNB on RX2 issue
- Replies: 13
- Views: 11090
Re: SNB on RX2 issue
Gary, Ok ... so I was not able to get it to do anything other than what was expected ... but your sequence seems ... strange and a bit arbitrary ... so first a few questions - what do you mean by "restart PSDR"? Is that "POWER" off and on or close the program and restart it? Seco...
- Mon Oct 15, 2018 12:53 pm
- Forum: PowerSDR mRX
- Topic: SNB on RX2 issue
- Replies: 13
- Views: 11090
Re: SNB on RX2 issue
Gary, I'll give it a try later today ... I know of several anomalies when turning RX2 on. I finished getting the RX array, a 8/4 vertical array, back up yesterday and was testing it last night and was reminded of the issues when using RX2. For example if you have VFO Sync on (I believe that is it - ...
- Wed Oct 10, 2018 1:11 pm
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: Whooshing noise.
- Replies: 10
- Views: 9225
Re: Whooshing noise.
I am using the RD Power 1KW supply ... I never run more than about 80W with my 8000 (if more than that needed I use the amp). It is a switcher but very quiet, at least RF-wise. You can find a spot that has this issue on the waterfall and pan - then have someone sit there while you go and shut off ci...
- Tue Oct 09, 2018 2:00 pm
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: Whooshing noise.
- Replies: 10
- Views: 9225
Re: Whooshing noise.
I too have it there on the lower bands but it is lost in the noise when the antenna is connected. I primarily see it on the upper bands - 15 and above. It is quite strong at times up there and I see 86Khz between "hill tops" (referencing your picture) or subsequent peaks. I'm pretty sure i...