Hi Richie, would you be so kind to incorporate a small change in the next release? Changing the frequency database limit from 20.000 to 50k? A few months ago Chris Codella made that change for me so i can use Dan Furguson's database (now > 23000 entries). Chris has send the change to Doug but it ha...

"what is this "Dan Furguson Database" you speak of? Thanks, Jeff NJ2US https://groups.io/g/swskeds/files (i think you have to join the group first) The latest file is A21-210626-1900.zip, it contains a .cvs that you have to convert it a bit before you can import it in Thetis. Hopefull...

Hi Richie, would you be so kind to incorporate a small change in the next release? Changing the frequency database limit from 20.000 to 50k? A few months ago Chris Codella made that change for me so i can use Dan Furguson's database (now > 23000 entries). Chris has send the change to Doug but it has...

ok ok nice! You pushed me to order a labeler at last

Next time try SparkSdr. There's a Linux version and i think it can program the firmware too.
(look for "Gateware Upload" in the SparkSdr manual.)
https://www.sparksdr.com/

Don't worry, the radio isn't bricked.
Download and use HPSDR Bootloader 2.0.4.4

More info can be found here:
search.php?keywords=HPSDR+Bootloader

Hi Mark, i can reproduce this "metalic" sound when using NR2 and Fast AGC.
It sounds better when using Slow or Long AGC. Regards.

Hi Scott, thanks for your reply. Yes i used CSVUserListBrowser before with SDRuno and SDRConsole but stopped using it because i don't use SDRuno anymore and it is very easy to import Dan's freq list directly into SDRConsole. I will give it a try with Thetis though, thanks for the tip.

HI, it seems there is a limit of 20.000 entries for the SWL list. You can have more in CVS file but only the first 20k are displayed in Thetis. 20k looks more then enough but Dan Furguson's SWL lists have more entries. Btw his lists have to be converted before you can use them in Thetis but that's n...

@Mark, can you make a recording like rbduck did?

Glad i could help :) NR2 is my favourite too, it is one of the best noise suppressors that i know but the NB is very good too. About a mile from my house there's a car factory. There welding robots produce lot of pulsed QRM, the noise floor jumps like crazy but it disappears completly when i enable ...

Hi, fwiw the only way i can reproduce that sound is to uncheck AE Filter.

Hello Andras, the correct forum address is: https://forum.sdr-radio.com Please register and place your question under Forums and add a full screenshot of SDRC there, please never cut the pictures. When using the build-in Screen Capture button in SDRC then also mention the SDRC version (due to a litt...

Nothing wrong with SDRC, to be honest i don't see any decent signals on your Thetis screenshot too.

Looking at the 7000/8000 schematics in the Thetis Manual (page 128): none of the antenna connectors are (nor can be) grounded.

UPDATE INFO:

viewtopic.php?f=9&t=3689&p=13886#p13886

To make things easy you can use K9DUR's "BandText Table Editor"

https://k9dur.us/powersdr_utilities.php
(new link)

Works with Thetis Database.xml too.
C:\Users\YOURNAME\AppData\Roaming\OpenHPSDR\Thetis-x64\database.xml

73 PD3LK, Leon

ok, here you go 1. download the csv from http://eibispace.de/ 2. after the download rename it to SWL.CSV 3. move this file to C:\Users\YOURNAME\AppData\Roaming\OpenHPSDR\Thetis (or \Thetis-x64, depending on which version you are using) 4. start Thetis and open Spot (at the top) 5. click on the butto...

Haven't found a edit option in Thetis but these settings are in the "database.xml" Search for <BandText>
Don't have to tell anyone to be very careful with this file, better not edit if you're not sure what you are doing and make a backup.

:D :D :D Thank! You pointed out that i was looking in the right direction... i had copied the files to the Thetis map i.s.o. Thetis-x64 Is there a location where recent files in the correct format can be downloaded? The ones i have are from dec 2020 (BC and utility) i asked to soon, the EIBI csv wor...

Hi Scott, there must be some kind of association cos Thetis can't find that file. (see pict)
This file is also mentioned in the PowerSDR manual but it doesn't tell in wich map it belongs.

Is there a PowerSDR user who can give us the complete path where the swl.csv files resides?

Got FXpad working on a small touchscreen, together with Thetis :D Connected to the VGA port on the motherboard and works nicely alongside two HDMI monitors connected to the graphic card. The size of the visual screen is 16 cm, the outside measurement is 17,5 cm (6,9”) both diagonal. The sharpness is...

No problem, as you maybe noticed i make mistakes too just by not reading a initial post well enough.
Age and language differences are my only excuse

it's not my post Scott

http://www.dxlabsuite.com/dxlabwiki/Tra ... trolApache

although i don't see any advantage of using Thetis in the middle of the Anan and DXlab...

Hi Scott, i had to wait more than a month but received the DJControl Compact yesterday. I'm surprised about the good quality of the wheels and knobs. Is your midi mappings file for this controller somewhere available for download or can i borrow a printable version? :) I would like to make mine exac...

Harry/Phil, thanks for the info about the Starlight, that saved me and possibly others from buying the wrong one. I stopped hassle around with the half working Behringer X-Touch One (so don't buy that One guys) and just ordered a DJControl Compact too. I learned one thing if you know that a particul...

There's a little bit more to it, Sigi changed Thetis.exe too