Search found 653 matches
- Thu May 25, 2017 2:27 pm
- Forum: Macro & MIDI Controller Software, Hardware & Scripts
- Topic: Behringer CMD PL1 just installed
- Replies: 6
- Views: 10321
Re: Behringer CMD PL1 just installed
Hi Scott, indeed many thanks to Chris , his instructions meant I had this running in minutes. I've been using the hercules compact for quite a while Scott and although it does not have multi "fast" speed tuning I've had no problems using it. If I did not need to keep it to control AF level...
- Thu May 25, 2017 12:40 pm
- Forum: Macro & MIDI Controller Software, Hardware & Scripts
- Topic: Behringer CMD PL1 just installed
- Replies: 6
- Views: 10321
Behringer CMD PL1 just installed
Hi Guys, just got a behringer CMD PL 1 from Amazon warehouse . First off its a lot chunkier than my hercules DJ compact with a great big wheel which has the great advantage of multiple speeds when used as VFO control. It lights up really nicely and the push buttons are solid. Only slight downside is...
- Fri May 19, 2017 12:08 pm
- Forum: PowerSDR mRX
- Topic: multiple & chained RX slices ?
- Replies: 5
- Views: 6873
Re: multiple & chained RX slices ?
Yes as Scott says all you need do is uncheck "limit stitched receivers" . I'm using this right now at 384 rate.
- Wed May 17, 2017 7:50 am
- Forum: PowerSDR mRX
- Topic: PowerSDR mRX PS 3.3.17 released
- Replies: 7
- Views: 8909
Re: PowerSDR mRX PS 3.3.17 released
I second that
- Mon May 15, 2017 12:08 pm
- Forum: PowerSDR mRX
- Topic: PowerSDR mRX PS 3.3.16 released
- Replies: 6
- Views: 7863
Re: PowerSDR mRX PS 3.3.16 released
Just had a read through of Chris's instructions for the Behringer PL1 controller, really easy to follow. Great job
- Fri May 12, 2017 6:51 pm
- Forum: PC's & Homebrew Hardware
- Topic: New PC Build: now UPDATED with overclocking performance
- Replies: 58
- Views: 70455
Re: New PC Build
Great work Scott, looks great . I'd be interested if you ever find out what the issue was with the Killer NIC as I was thinking of investing in one.
- Mon May 01, 2017 8:10 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Hermes Protocol 2 firmware v10.3 released
- Replies: 47
- Views: 79605
Re: Hermes Protocol 2 firmware v10.3 released
Great info Rob, thanks
- Mon May 01, 2017 4:20 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Hermes Protocol 2 Gigabit firmware v10.4 available for beta testing
- Replies: 9
- Views: 23228
- Mon May 01, 2017 12:01 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Hermes Protocol 2 firmware v10.3 released
- Replies: 47
- Views: 79605
Re: Hermes Protocol 2 firmware v10.3 released
On the plus side too we will be able to use Simons SDR console as well as Thetis.
- Mon May 01, 2017 11:53 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: Hermes Protocol 2 firmware v10.3 released
- Replies: 47
- Views: 79605
Re: Hermes Protocol 2 firmware v10.3 released
Indeed yes, I'm disappointed that Apache had not addressed this before I bought my radio as the Gigabit protocol was known about at the time. Doesn't sound to complicate but still customer have to open their radios and do the mod. to get the Gbit capability! And those who aren't able to do that? No ...
- Mon May 01, 2017 11:43 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: Hermes Protocol 2 firmware v10.3 released
- Replies: 47
- Views: 79605
Re: Hermes Protocol 2 firmware v10.3 released
Scott thanks again for the info. I'll try running at 384
- Sun Apr 30, 2017 1:33 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Hermes Protocol 2 firmware v10.3 released
- Replies: 47
- Views: 79605
Re: Hermes Protocol 2 firmware v10.3 released
I understand why it was removed Scott but if I run at 192 as at present with Power sdr will I not lose some functionality with Thetis? For example on 6m band I can see over 500KHZ with "limit stichted Receivers" unchecked, when its checked i can see only 160khz or so.
- Sun Apr 30, 2017 12:30 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Hermes Protocol 2 firmware v10.3 released
- Replies: 47
- Views: 79605
Re: Hermes Protocol 2 firmware v10.3 released
I was wondering that myself. If its not possible then perhaps "stitched receivers" could be enabled in Thetis as a work around
- Thu Apr 27, 2017 10:07 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: Hermes Protocol 2 firmware v10.3 released
- Replies: 47
- Views: 79605
Re: Hermes Protocol 2 firmware v10.3 released
Thanks Simon
- Thu Apr 27, 2017 8:52 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: Hermes Protocol 2 firmware v10.3 released
- Replies: 47
- Views: 79605
Re: Hermes Protocol 2 firmware v10.3 released
Thanks Joe. Do you (or Simon perhaps) happen to know if the lower data rate will work with SDR console ?
- Wed Apr 26, 2017 5:04 pm
- Forum: PC's & Homebrew Hardware
- Topic: Videocard???
- Replies: 9
- Views: 15823
Re: Videocard???
750TI works fine for HPSDR although as far as I know only SDR Console uses CUDA core. I think the GTX 950 is good value for the price if you want to use SDR console in the future.
- Wed Apr 26, 2017 2:29 pm
- Forum: Transverters
- Topic: Anan 100 Xvtr RX BNC port
- Replies: 4
- Views: 14277
Re: Anan 100 Xvtr RX BNC port
Hi Volker, yes I had that already checked. Thanks for posting Edit : I also see that "disable bypass" is mentioned so guess its ok to use this.
- Wed Apr 26, 2017 9:41 am
- Forum: Transverters
- Topic: Anan 100 Xvtr RX BNC port
- Replies: 4
- Views: 14277
Re: Anan 100 Xvtr RX BNC port
Playing around with settings here and when I clicked on "disable BYPASS" I seem to have Rx now through RX Xvtr. Are there any links to info to explain what "Disable BYPASS" does ? Edit: Just read this on http://anan-100d.wikidot.com/100d-psdr , Does this apply to the hermes board...
- Tue Apr 25, 2017 8:20 pm
- Forum: Transverters
- Topic: Anan 100 Xvtr RX BNC port
- Replies: 4
- Views: 14277
Anan 100 Xvtr RX BNC port
Is there a jumper setting to activate the Xvtr RX BNC port on Anan 100 hermes . I can get my Xverter to input via ANT 3 but not through the BNC Xvert port ? Are there other settings I need to change other than XVTR checkbox on 10m in ANT control on power sdr ? Sorry if this has been asked before, I'...
- Tue Apr 25, 2017 10:20 am
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: No Cooling issues here :)
- Replies: 5
- Views: 7090
Re: No Cooling issues here :)
I really like the new forum format where pics appear in posts, most interesting.
- Mon Apr 17, 2017 11:37 am
- Forum: SDR Console
- Topic: New Protocol
- Replies: 6
- Views: 16164
Re: New Protocol
watching with baited breath
- Tue Apr 11, 2017 8:44 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: Thetis for 100
- Replies: 3
- Views: 6606
Re: Thetis for 100
I usually listen back to Teamspeak on the weekends to get a handle on what progress is being made http://www.hamsdr.com/dnld.aspx . Unfortunately Phil's house got hit by lightning which has set him back timewise.
- Mon Apr 10, 2017 3:11 pm
- Forum: Transverters
- Topic: ANAN 200D with Transverter
- Replies: 6
- Views: 18458
Re: ANAN 200D with Transverter
Hi Trev , I'm also interested in this as I plan to get a 4m xtvr . Like you i'm seeing the ANT1 signal coming through when 4m is selected , thought this should be completely dead as there is nothing connected to xvtr port yet. Using Anan 100, my guess is I'm missing some setting or checkbox.