Thank you.

I recently installed Thetis. I am using the Anan 10-e. I did something and now my transmit view on the panadapter in super zoomed. Receive screen is normal. Thanks for any help.

I have been operating my setup remotely for 3 years as seen in this thread here. https://apache-labs.com/community/viewtopic.php?f=24&t=2487 The transmit audio has never been perfect. I have tried making that all sample rates etc are all the same and still have glitches, drop outs etc. Would som...

I have an old flex sdr-1000 with the 100 watt pa/ filter board. It is a pretty straight forward design. I need to be able to drive an al-1200 to 1kw or so. I have the schematics for the pa board, filter board etc. I have a shear, brake etc to make an enclosure or may leave it inside the flex enclosu...

Ditto, what fixed it Cecil?

Thank you Scott.

Does anyone know how to uninstall PowerSDR mRX and do a clean install? Windows 10 computer. Thanks.

I am using a homebrew coax switch that is controlled by an ip controlled relay board. I will try to get some pics uploaded and more details.

Install with clean database due to other issues, still have the same issue. Any suggestions?

The playback, I can record myself to use for setting up CFC but I cannot hear myself or see it on playback why MOX is enabled, I can hear and see it if I play it back without keying up the radio, no MOX.

I still have not figured out what is causing this or a fix. Any suggestions?

You are not providing nearly enough information to debug your problem. Did AM mode ever work for you? Or is this the first time you've tried it? Does the radio go into transmit mode? Do you at least get a carrier? If so, what power level are you set to, and what is the power level of the carrier? W...

I have TX audio in SSB mode but no TX audio in AM mode. Using a behringer UMC202HD microphone interface.
Thanks for any help.

The record/ playback feature does not work for me when using VAC. It works normally if I am using the microphone jack on the front of the anan 10E. Any suggestions?

Thanks

Thanks for the reply Scott. I carefully removed K19 from the board and reinstalled with the legs originally grounded now pointing up and routed to a small piece of coax that led to a SMA female on the back of the radio. I drilled a hole in the back panel. After reassembling the radio it would not po...

So is the xtronics sampler useless for the anan 10 and 10E?
What about this https://www.tapr.org/kits_trplus.html ? You guys that seem to know all the bells and whistles about these rigs post up your thoughts.
Thanks

This is the conflicting information I was referring to. I would like to find a way to use the xtronics directional coupler. How is k19 different than the way this scenario is accomplished on the ANAN rigs that run puresignal with external amplifier? Like the later ANAN 100, 100D, and 200D? I also se...

I tend to agree regarding the cross talk. I just seem to remember Stu advising against the K19 to SMA mod. I am going to give it a shot.

I am getting conflicting advice regarding modifying the anan 10e to use an external amp with puresignal. I have read modify k19 by removing the ground and route to sma on back of the radio and then I read that this will allow to much cross talk. What is the correct way to go about this? I am using t...

My setup is an ANAN 10E with PowerSDR mRX PS v3.4.6. I have removed the small jumper between J3 and J29. I have a homebrew T/R relay box "pictured below" configured like the top of Ricks page. http://www.qsl.net/wa6nut/PureSignal My amplifier is a homebrewed pair of BLF188XR that produces ...

When you sat SMA on the rear panel, are you suggesting adding an additional SMA connector? When you say J5 are you referring the the accessory port or something else? [EDIT] I found J5. I found where it looks like Bill W7AAZ figured out a way to make pure signal work. I will reread what he has done ...

I will go have a look.
Thanks for the advice.

I do not have a bypass or Ext1 port on the reap panel of the anan 10-e. Maybe I missed something in the manual but I did not see this info. I have the XDC-4SO coupler and 20db attenuator and sma cable. Amplifier is usually used at about 1200 -1450 pep.

Thanks for any help.

I have been thinking of giving this a try. My current scenario is perfect 95% of the time.

Just wanted to post an update. I have been controlling my station and using openhpsdr remotely for a few months now. Its works rather well. The only issue I have is with my record (transmit) audio being choppy and breaking up sometimes. I can see this happen as it happens on the screen of psdr. I ha...

Thank you for all your help Scott!!

I still cannot figure out what causes the hardware out on VM banana to change to 44100 hz when in RDP, I have just opted to change the sample rate to 44100 hz in the VAC 1 tab when operating remote with no issues that I can see. I have a trusted source and used it this way for a few hours a night fo...

w-u-2-o wrote:Do you have a different remote machine you can try?

Unfortunately no.

Hello all. I wanted to update where I am at here. I tried to uninstall and reinstall everything in an attempt to solve the 44100 hz issue when choosing MME: hardware out in voicemeeter banana. Still had the same issue. I am not sure if it is due to my on board sound card on HP computer or not. I cha...

I will give that a try this evening. I was actually able to test it last night while out of town at a ham fest. Hotel internet was so so, 15-18 mb down, 2-5 up with 30ms ping. There is a few second delay or more between when I see the radio key up and when I see my audio register. I am still getting...