Going back to question 1. Why don't I see V2 or the CPU Usage percentage indicator on the top toolbar of my screen? Because you didn't modify your Raspberry Pi operating system like the author of the manual did before he took those screenshots. Remember that you have a Pi based computer there runni...

But does it have any support for the control of the step attenuator?

Dick, There's a lot to unpack here: 1. Before you get too far you need to upgrade to the latest version of Thetis. 2.8.11 is very old. You want to install 2.9.0.6. You can get it here: https://github.com/ramdor/Thetis-2.9.0/releases/tag/v2.9.0.6 Download the x64.msi file and install. 2. In 2.9.0.6 t...

Well I must be a glutton for punishment. I fixed the audio problem, which was just my lack of understanding of the user interface. And I fixed the disconnect problem, which had something to do with having two IP addresses on a single NIC. I had to configure two NICs. I'm only running it on an older ...

I fooled with it a bit late yesterday. I can't get anything through pulseaudio, so that would have to be the next Linux mystery to unravel. Meanwhile Youtube in the browser and VLC all work fine, so it's not the OS. Even if I overcome that, the discovery process is broken. If I start linHPSDR, then ...

yes I will use the Icom 1000 amp who made this coupler do you know I think there is a German guy but cant remember his link many thanks again for so quick and pro answer very kind of you Be careful that the coupler setup does not produce more than +13dBm maximum into the Bypass input. See also: htt...

There is a proper internal coupler built into the 7000, and it is automatically selected on transmit. Don't forget, however, to enable ATT on TX in Setup > General > Ant/Filters > Antenna. If you are using an external amplifier then, yes, you need a coupler, or you need an amplifier with a built-in ...

Thank you for the response, Jani. I've got it sorted out now. I traced the problem back to a mistake I made, which was needing to load the fft3 library with apt-get instead of apt, and I had not noticed that wdsp didn't build correctly. No red text in the terminal window :D I got fft3 installed corr...

Did you submit that back to Richie via his Git repo? He would certainly appreciate it if you did.

You have to use the headphone jack on the front.

Here is a lengthy thread on powered speakers and how to interface them: viewtopic.php?f=12&t=3350

@db8gk

Trying to build this and failing

Got all the dependencies installed. Got WDSP built. When I try to build your version, Andreas, I get this error:

main.c:33:10: fatal error: wdsp.h: No such file or directory
33 | #include <wdsp.h>
| ^~~~~~~~

Looks like it should be an easy fix actually. I'd take a look at it but 2.9.0.3 is the most current version in the git repository. You are looking at the wrong repository. Look to Richie's GitHub repo here: https://github.com/ramdor/Thetis-2.9.0/releases/tag/v2.9.0.6 . The source code is there for ...

Scalling was the issue. That messes me up in some other stuff, however I will find a way through it. Thanks and hoping that it can be addressed. 100% on a 4K 50 Inch display is literally a headache for the eyes. Glad I guess right :) I run triple, 28", 4K displays. I use 150% scaling with no p...

Thank you SAM Who's SAM? Thanks for posting all that good info, Ron. That will undoubtedly be valuable for others. Lastly, I notice the bottom row of push buttons do not sit up above the front panel, not as much as the right hand side push buttons. The switch buttons seem to bow down in the middle ...

Never had a label on my 100D, or my 8000. Apache doesn't do things like big companies do things. Sometimes that's good, sometimes that's bad.

Another useful video on two element beamforming. It's easy to see how complex it can get with two matching dipoles. Given the random antennas, at random orientations, with random distances, that we typically use, real world results will be much more of a dog's breakfast. At the end of the day it onl...

You only need one if the laptop does not have a built-in GigE NIC, or if you need an extra one for your laptop. I have no specific recommendations.

You need a USB3.0 NIC and a standard Ethernet cable.

If there is no actual NIC in the laptop a USB3.0 GigE NIC will work fine. USB2.0 will not support the full GiGE speed, so get a laptop with USB3.0 ports.

I agree with Walter. However, if you have your heart set on a switch, it will need to be an unmanaged switch in order to use Bootloader to load firmware. And even then, not all unmanaged switches will work properly. If you do move forward with a switch, look for an unmanaged switch, in a metal case ...

Andrew: have you taken my suggestion to set up a dedicated NIC? Because even the fastest, most amazing computers often get SEQ errors without a dedicated NIC. So don't be too quick to blame your laptop. This problem is endemic and is a result of the communications protocol used between the software ...

Looking at the (scant) information available in the documentation for the transverter output, it looks to be nominally +10dBm, and not likely to be over +15dBm max., depending on how you calibrate the drive level in Thetis.

david schoenwald wrote:Where will I find a control to adjust transmit bandwidth? I found receive bandwidth, but I would like to increase
transmit band

Page 22 in the manual.

You do have a copy of the manual, right?

End of July I will move to OE-country. However; I want to keep the ANAN-7000DLE in PA-country and controll the SDR by means of the Controller V2. Is there someone in the group who has done like this before; controlling the ANAN7000 over a long distance with the Controller V2? Perhaps someone is abl...

Firstly, my prime reason for buying the V2 Controller, was simply to use the rotary encoder VFO knob for tuning the spectrum, as I dislike using the scroll mouse of point and click to to select frequencies. A few other switches would come in handy as well. Something simple, like the Expert Electron...

Wrong sub-forum for both of these posts. Moved the topic to the correct sub-forum for the first post/question. No need to "shout"--all capital letters is "shouting" on the internet. There is no "best" laptop. There are literally hundreds of them, if not thousands, that ...

In Windows Settings > Display, try changing your scaling factor to 100% if it isn't already.

put another way, how do you monitor yourself so that you can make transmit adjustments to your audio? Asked and answered already, David, in response to your first post on this. Same answer this time: there is no way to do it with the Controller V2 (or V1) by itself. You'd have to set up a second ra...

Everything you need to know is in the three tacked topics here: https://apache-labs.com/community/viewforum.php?f=18 Use the instructions for Bootloader. Ignore the instructions for any version of HPSDR Programmer. Those instructions are 100% good. The only reason they won't work is because either a...

I terminate all unused connectors on all my radios, without exception.