Search found 5540 matches
- Wed Jan 31, 2024 2:26 pm
- Forum: Microphones, Speakers & Audio Hardware
- Topic: DAW - Anan connection via VoiceMeeter Banana
- Replies: 13
- Views: 1249
Re: DAW - Anan connection via VoiceMeeter Banana
Have you got Thetis to work with Voicemeeter? That is the first, necessary step.
- Wed Jan 31, 2024 11:23 am
- Forum: Microphones, Speakers & Audio Hardware
- Topic: DAW - Anan connection via VoiceMeeter Banana
- Replies: 13
- Views: 1249
- Wed Jan 31, 2024 11:19 am
- Forum: Thetis
- Topic: 700DLE/Thetis ext 10 Mhz sorce( AND) correction factor?
- Replies: 12
- Views: 1926
Re: 700DLE/Thetis ext 10 Mhz sorce( AND) correction factor?
The links to the FW with the RF burst fix are located here: viewtopic.php?f=32&t=4972
I believe those will also have the PLL fix.
I believe those will also have the PLL fix.
- Tue Jan 30, 2024 11:25 pm
- Forum: Microphones, Speakers & Audio Hardware
- Topic: DAW - Anan connection via VoiceMeeter Banana
- Replies: 13
- Views: 1249
Re: DAW - Anan connection via VoiceMeeter Banana
Here is an example of what Mark is talking about. What DAW are you using?
- Mon Jan 29, 2024 5:15 pm
- Forum: Upgrading/Downgrading
- Topic: Is Bootloader working OK for people who are running Windows 11?
- Replies: 23
- Views: 5528
Re: Is Bootloader working OK for people who are running Windows 11?
Follow the link in my 28 Oct post above. It should answer most of your questions about the various options for loading firmware.
- Mon Jan 29, 2024 3:10 pm
- Forum: Upgrading/Downgrading
- Topic: Is Bootloader working OK for people who are running Windows 11?
- Replies: 23
- Views: 5528
Re: Is Bootloader working OK for people who are running Windows 11?
Bootloader does not care about IP addresses. When you boot the ANAN in Bootloader mode it advertises a MAC address only. The Bootloader app sends out a raw Ethernet broadcast packet that the Bootloader firmware in the ANAN responds to. Knowing the MAC address of the ANAN, the Bootloader app then use...
- Mon Jan 29, 2024 1:34 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1
- Replies: 35
- Views: 29712
Re: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1
I've noticed a frequency offset when using protocol 2 with a 7000DLE MK3. It is around -160Hz. When using protocol 1, the frequency is correct (within several Hz). I asume that with only changing between protocol 1 and 2 firmware, the frequency should be identical. Do you also have the frequency of...
- Fri Jan 26, 2024 6:16 pm
- Forum: Apache-specific Hardware Discussions
- Topic: BCD output from OC interface
- Replies: 15
- Views: 1633
Re: BCD output from OC interface
ANAN pin 9 to AG pin 11 ANAN pin 8 to AG pin 12 ANAN pin 7 to AG pin 13 ANAN pin 6 to AG pin 14 ANAN pin 1 to AG pin 15 On each of the four "band" lines connect a pull-up resistor to +12VDC. This can be done at the ANAN end or the AG end. I appreciate you explaining all of this. Maybe if ...
- Fri Jan 26, 2024 4:54 pm
- Forum: Apache-specific Hardware Discussions
- Topic: BCD output from OC interface
- Replies: 15
- Views: 1633
Re: BCD output from OC interface
ANAN pin 9 to AG pin 11
ANAN pin 8 to AG pin 12
ANAN pin 7 to AG pin 13
ANAN pin 6 to AG pin 14
ANAN pin 1 to AG pin 15
On each of the four "band" lines connect a pull-up resistor to +12VDC. This can be done at the ANAN end or the AG end.
ANAN pin 8 to AG pin 12
ANAN pin 7 to AG pin 13
ANAN pin 6 to AG pin 14
ANAN pin 1 to AG pin 15
On each of the four "band" lines connect a pull-up resistor to +12VDC. This can be done at the ANAN end or the AG end.
- Fri Jan 26, 2024 3:28 pm
- Forum: Apache-specific Hardware Discussions
- Topic: BCD output from OC interface
- Replies: 15
- Views: 1633
Re: BCD output from OC interface
Thanks, that thread is informative... but unfortunately not enough (for me) to get over the hump. :? For starters, I really should state what my goal is. I am attempting to send BCD to my 4o3a 'Antenna Genius' 8x2 switch using a 5C cable. Do I need to 'inject' +12VDC into this circuit? Or do I only...
- Fri Jan 26, 2024 1:19 am
- Forum: Apache-specific Hardware Discussions
- Topic: BCD output from OC interface
- Replies: 15
- Views: 1633
Re: BCD output from OC interface
It's really not that difficult.
There are lots of handy products to add some pull-up resistors to a DE9 connector.
See also this topic: viewtopic.php?f=46&t=4507&p=23384
There are lots of handy products to add some pull-up resistors to a DE9 connector.
See also this topic: viewtopic.php?f=46&t=4507&p=23384
- Mon Jan 22, 2024 11:26 am
- Forum: Thetis
- Topic: 700DLE/Thetis ext 10 Mhz sorce( AND) correction factor?
- Replies: 12
- Views: 1926
Re: 700DLE/Thetis ext 10 Mhz sorce( AND) correction factor?
There is a lengthy, tacked, 5 page thread on GPSDO operation:
https://community.apache-labs.com/viewtopic.php?f=17&t=2499
Read through that and see if all your questions are answered.
If not, then please post your GPSDO related questions at the bottom of that thread.
https://community.apache-labs.com/viewtopic.php?f=17&t=2499
Read through that and see if all your questions are answered.
If not, then please post your GPSDO related questions at the bottom of that thread.
- Sun Jan 21, 2024 11:26 am
- Forum: Apache-specific Hardware Discussions
- Topic: G2 Raspberry Pi5
- Replies: 4
- Views: 749
Re: G2 Raspberry Pi5
It's probably not a good idea to call it a "Pi4". That is a different product. It is a CM4. If and when the Pi Foundation ever gets around to offering a CM5 it is very likely it will be physically compatible and it would be just a board swap. Learn more about the CM4 here: https://www.rasp...
- Sat Jan 20, 2024 6:27 pm
- Forum: Apache-specific Hardware Discussions
- Topic: G2 Raspberry Pi5
- Replies: 4
- Views: 749
Re: G2 Raspberry Pi5
The G2 uses a Raspberry Pi Compute Module 4 (CM4), not a Pi 4. The CM4 did not come out until until 16 months after the Pi 4. Thus it will likely be some time before they produce a "CM5". If you are both adventurous and knowledgeable about this sort of thing there are already many alternat...
- Sat Jan 20, 2024 3:29 pm
- Forum: Thetis
- Topic: Wave Record Never Worked
- Replies: 4
- Views: 887
Re: Wave Record Never Worked
Does this help: viewtopic.php?f=9&t=4944&p=28185 ?
- Tue Jan 16, 2024 11:36 pm
- Forum: Thetis
- Topic: Thetis and Norton security
- Replies: 9
- Views: 1778
- Tue Jan 16, 2024 1:44 am
- Forum: Thetis
- Topic: Direct X dependencies with Thetis
- Replies: 2
- Views: 698
Re: Direct X dependencies with Thetis
What happens is it doesn't work.
A quick search shows that card supports 11.1 (with latest drivers, I assume). But it is an old card...
The GPU is used only for drawing, not for any DSP.
A quick search shows that card supports 11.1 (with latest drivers, I assume). But it is an old card...
The GPU is used only for drawing, not for any DSP.
- Mon Jan 15, 2024 8:45 pm
- Forum: Apache Labs News
- Topic: ANAN-G2 Shipping Update
- Replies: 255
- Views: 3050304
Re: ANAN-G2 Shipping Update
Interesting. I never knew exactly where they were located.
- Mon Jan 15, 2024 11:39 am
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 232
- Views: 78662
Re: cmASIO feature in Thetis
And yet it works fine with Voicemeeter. What performance issues?
- Mon Jan 15, 2024 1:39 am
- Forum: Thetis
- Topic: Click tune not working correctly
- Replies: 2
- Views: 722
Re: Click tune not working correctly
Please tell us exactly what version you are running.
- Sun Jan 14, 2024 2:36 pm
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 232
- Views: 78662
Re: cmASIO feature in Thetis
Bryan: why can't cmASIO follow the buffer size set by the device driver?
- Sat Jan 13, 2024 9:39 pm
- Forum: Thetis
- Topic: Thetis and Norton security
- Replies: 9
- Views: 1778
Re: Thetis and Norton security
I'm not familiar with Norton, but it would seem it is not fully excluded from all checks. Achieving that level of exclusion would be a goal.
You could also test by disabling Norton temporarily.
You could also test by disabling Norton temporarily.
- Sat Jan 13, 2024 6:56 pm
- Forum: Thetis
- Topic: Thetis and Norton security
- Replies: 9
- Views: 1778
Re: Thetis has crashed
Please edit your title. Thetis has not crashed, it has been blocked by your Norton anti-virus software. Perhaps your virus definitions updated in a way that now has Norton flagging Thetis as a problem. You may need to tell Norton to generate an exclusion for Thetis. Do you run Thetis as administrator?
- Sat Jan 13, 2024 6:54 pm
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: 7000DLE MKII - 9-pin connector pinout
- Replies: 3
- Views: 916
Re: 7000DLE MKII - 9-pin connector pinout
Just out of curiosity what do you plan to use those outputs for?
- Fri Jan 12, 2024 10:10 pm
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: 7000DLE MKII - 9-pin connector pinout
- Replies: 3
- Views: 916
Re: 7000DLE MKII - 9-pin connector pinout
The pinout is here: https://apache-labs.com/community/viewtopic.php?f=35&t=2343 You can program the pins to work however you like in Setup > General > ANAN Control, and "Ext Control" must be enabled on that screen. Each output is basically an open drain FET switch to ground when assert...
- Fri Jan 12, 2024 12:34 pm
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 232
- Views: 78662
Re: cmASIO feature in Thetis
GW0NTM wrote:Hi All
Does anyone know what input channels are being used by cmASIO? Is it mono from channel #1, or a mono combination of channels #1 and #2?
Thanks
Robin
Mono combination.
- Tue Jan 09, 2024 4:13 pm
- Forum: Apache-specific Hardware Discussions
- Topic: G2 Service/Schematics info
- Replies: 9
- Views: 1546
Re: G2 Service/Schematics info
Full schematics for the 7000, 8000, Andromeda and G2 have not been cleared for public posting by Apache. However, in accordance with the open source hardware derivative works license clause, they will provide them direct to any owner on request. You will need to mail Apache.
- Mon Jan 08, 2024 1:48 am
- Forum: G2 Operating System & Applications
- Topic: Rack Audio Help on G2 with no display.
- Replies: 8
- Views: 1493
Re: Rack Audio Help on G2 with no display.
I don't have a G2. However there have been a number of people who have had success with the balanced input (and a number of people who haven't ).
- Sun Jan 07, 2024 9:13 pm
- Forum: G2 Operating System & Applications
- Topic: Rack Audio Help on G2 with no display.
- Replies: 8
- Views: 1493
Re: Rack Audio Help on G2 with no display.
I would suggest trying the balanced TRS input on the back (it may be somewhat erroneously marked "XLR"). However, beware that that is the input to a high gain mic preamp and thus it would be prudent to go easy on levels at that input.
- Sat Jan 06, 2024 1:42 pm
- Forum: Digital ("Virtual") Audio
- Topic: indepenten VAC1 using RX1AF ???
- Replies: 3
- Views: 747
Re: indepenten VAC1 using RX1AF ???
Sort of. Master AF will control the overall audio level for cmASIO. My recommendation would be to set RX1 and RX1 AF to maximum. This will achieve a proper and optimal 0dB audio level into digi mode software attached via VAC. Then use Master AF to adjust cmASIO audio level and which does not affect ...