Jorge,
You might try it before, then delete, then after...
Search found 175 matches
- Sat Mar 14, 2020 2:30 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 165398
- Sat Mar 14, 2020 1:28 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 165398
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hello All, I went through this Apache-Labs website searching for clues. Mainly trying to see if ANYONE had success with Hermes / ANAN-10/100 and Protocol2 / Thetis. I came across this series of posts where it appears Rob W1AEX claimed running Hermes_Protocol_2_v10.3 : "I also ran Pure Signal an...
- Fri Mar 13, 2020 7:54 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 165398
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Andy, Jorge, Arno, ALL, Tnx for the new video Andy. My testing shows very similar results with pre12 but more like 1 out of 10 PTTs and only after my ANAN-10 has warmed up. I am not feeding back that much power from my K19 SWR bridge modification so when I transmit with PS set to auto-attenuate my S...
- Fri Mar 13, 2020 1:47 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 165398
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hey Andy and ALL, I should have described my setup more accurately. My ANAN-10 has been modified via K19 so that it doesn't ground and the signal from the SWR network same as the ANAN-200/7000 Tx signal is fed back for PS running 'barefoot'. Never-the-less, I am able to reproduce your problem with P...
- Thu Mar 12, 2020 1:27 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 165398
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
So I have been playing with the 384K and greater sampling rates just because I can reproduce the
PS problem dropping out with 1/2 the peak.
EDIT!
I can also reproduce at 192K, just not so easily.
Working on it...
Tnx for your testing!
-Rick / N1GP
PS problem dropping out with 1/2 the peak.
EDIT!
I can also reproduce at 192K, just not so easily.
Working on it...
Tnx for your testing!
-Rick / N1GP
- Thu Mar 12, 2020 12:31 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 165398
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hello Andy Arno and ALL, Tnx so much for the videos. I have watched them very closely to make sure I understand your settings and operation. You both have the same symptoms with the peaks going to 1/2. Seems maybe 1 out of 4 transmissions you lose the PS. Interesting that it is on a PTT transition. ...
- Tue Mar 10, 2020 9:10 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 165398
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Tnx guys for your testing a great feedback. pre9 works flawlessly on my ANAN-10. I can't make PS misbehave! This next test image I added a reset to the rx0 & rx1 fifos on a transition of PTT with the thought that rx0 & rx1 may get out of sync on PTT transitions. Purely experimental, but look...
- Tue Mar 10, 2020 12:58 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 165398
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
This firmware image changes the DAC clock to 45 degrees of the ADC. The last image changed from 90 degrees to zero, and seemed to make a difference towards PS being more stable. Just getting some data points, tnx for trying and reporting back! https://www.dropbox.com/s/oxylrph2ggi4yks/Hermes_Protoco...
- Sun Mar 08, 2020 11:22 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 165398
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi Jorge, Tnx for giving it a try. Here's another one to try. This time I've changed the clock feeding the DAC. It's no longer 90 degrees out of phase with the ADC clock. Still working for me but I do notice that PS is locked in better: https://www.dropbox.com/s/082gk2ov37egglj/Hermes_Protocol_2_v10...
- Sun Mar 08, 2020 1:38 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 165398
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
I've been experimenting with timings (mostly ethernet phy) trying to get PS more stable on all bands. This one is working pretty well from 160-6 mtrs on my ANAN-10. Please give it a try and report back when you have a chance: https://www.dropbox.com/s/1ea2d62xlye4f1k/Hermes_Protocol_2_v10.8_pre6.rbf...
- Thu Feb 13, 2020 12:26 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
- Replies: 185
- Views: 169133
Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic
Hi Fabio, I have tried to reproduce this on my 7000DLE running Orion_MkII_Protocol_2_v2.0b.rbf and cannot. I put a switch on PTT-IN (as per your attached photo) and when I switch it on PTT works on all modes including CW. BUT, if the CW QSK is enabled it does not. Could that be the case for you? -Ri...
- Thu Feb 13, 2020 12:07 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New 200D Orion Protocol 2 Firmware Topic
- Replies: 84
- Views: 71796
Re: New 200D Orion Protocol 2 Firmware Topic
Hi Rob,
Tnx for the detailed report.
Is the Firmware 1.8 you report the same as the one available on the TAPR
github protocol2 area?
-Rick / N1GP
Tnx for the detailed report.
Is the Firmware 1.8 you report the same as the one available on the TAPR
github protocol2 area?
-Rick / N1GP
- Tue Feb 11, 2020 3:41 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
- Replies: 124
- Views: 165398
Re: New -10/-100 16-BIT Hermes Protocol 2 Firmware Topic
Hi Jorge,
Could you try this updated FW. It fixes the FW version and has some timing changes
for PS:
https://www.dropbox.com/s/5ssofoegz0qcov6/Hermes_Protocol_2_v10.8_pre5.rbf?dl=0
Tnx
-Rick / N1GP
Could you try this updated FW. It fixes the FW version and has some timing changes
for PS:
https://www.dropbox.com/s/5ssofoegz0qcov6/Hermes_Protocol_2_v10.8_pre5.rbf?dl=0
Tnx
-Rick / N1GP
- Tue Feb 04, 2020 12:27 pm
- Forum: Thetis
- Topic: Thetis 1/24/2020 update
- Replies: 12
- Views: 10548
Re: Thetis 1/24/2020 update
Hi John,
Could you try this FW for the 7000/8000, it does address the xvtr issue. Let us know if it
works OK for you:
https://www.dropbox.com/s/1sjmkl0ya7ybz ... b.rbf?dl=0
-Rick / N1GP
Could you try this FW for the 7000/8000, it does address the xvtr issue. Let us know if it
works OK for you:
https://www.dropbox.com/s/1sjmkl0ya7ybz ... b.rbf?dl=0
-Rick / N1GP
Re: 2.6.9
Hi Phil,
So happy to hear of such positive results!
Thank-you for the thorough testing and detail.
Martinique is on my bucket list, what a beautiful place!
73's -Rick / N1GP
So happy to hear of such positive results!
Thank-you for the thorough testing and detail.
Martinique is on my bucket list, what a beautiful place!
73's -Rick / N1GP
Re: 2.6.9
@Phil FM5GB I'm trying to understand and address the issue YOU have. Then I will try and understand the others and address them. If I read your reply correctly something because of the change I did made things work for you better but not completely, yes, no? I have never used an XVTR on any of my AN...
Re: 2.6.9
The PA disable function wasn't implemented in the P2 Mk1 or Mk2 firmware.
I enabled it in this version for the Mk1 (200D), could you guys give it a try?
https://www.dropbox.com/s/jvsxbn5coystadu/Orion_NP_v1.9_pre2.rbf?dl=0
Tnx, Rick / N1GP
I enabled it in this version for the Mk1 (200D), could you guys give it a try?
https://www.dropbox.com/s/jvsxbn5coystadu/Orion_NP_v1.9_pre2.rbf?dl=0
Tnx, Rick / N1GP
Re: 2.6.9
BTW I just noticed you both said v1.8_pre2. Got it
Re: 2.6.9
Hey Guys, Back from getting in some Christmas cheer, (best to all of you folks BTW)! So John now that I actually tried it the way you guys are seeing it, RX set to ANT3 but TX is still on ANT1 (NO TX on both 2 & 3). I see that full power is sent to ANT3 when sending QSK CW. But if I instead just...
Re: 2.6.9
Hi Guys, I've gotta head out very shortly but I wanted to help out with this QSK xmitting on non-selected antenna outputs. With just a few short tests I have not been able to replicate the issue pn my 200D. WIll test more later. But I put together a test FW image for the 200D P2 that puts the Alex c...
Re: 2.6.8
@Gary NC3Z
Honestly I don't remember for sure. But I'm pretty sure it was just changing the
timing of the tx/rx data going through the ethernet PHY chip.
That setting alone makes or breaks timing for some radios.
Honestly I don't remember for sure. But I'm pretty sure it was just changing the
timing of the tx/rx data going through the ethernet PHY chip.
That setting alone makes or breaks timing for some radios.
- Sat May 04, 2019 10:55 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
- Replies: 44
- Views: 41953
Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Guys, Please try this out and report back, if you would. Working OK here on my Angelia: no Seq errors, solid PS, solid RX2, solid diversity. The major difference with this one is that it should hold its timing over a wider temperature range. https://www.dropbox.com/s/9upj7vx5ji3os49/Angelia_Protocol...
- Sat May 04, 2019 8:25 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: 7000 and 8000 Protocol 2 users: what say you?
- Replies: 41
- Views: 41345
Re: 7000 and 8000 Protocol 2 users: what say you?
Hi Guys, This build has some thermal parameter changes in the Quartus (FW Compiler) timing area suggested by our resident Systems Guru Scott/WU2O. The idea is to tell Quartus to compile for a wider thermal range and hopefully work better on more or most 7000/8000's https://www.dropbox.com/s/ndahfr5z...
- Sat May 04, 2019 8:15 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: RX1 or RX2 noise floor goes full scale on Ver 1.9
- Replies: 12
- Views: 11665
Re: RX1 or RX2 noise floor goes full scale on Ver 1.9
Hi Guys,
Could you try this new build, so far working well for me...
https://www.dropbox.com/s/ndahfr5zgh1l252/Orion_MkII_Protocol_2_v2.0_pre1.rbf?dl=0
Tnx
-Rick / N1GP
Could you try this new build, so far working well for me...
https://www.dropbox.com/s/ndahfr5zgh1l252/Orion_MkII_Protocol_2_v2.0_pre1.rbf?dl=0
Tnx
-Rick / N1GP
- Thu May 02, 2019 12:33 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
- Replies: 44
- Views: 41953
Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Tnx for the detailed results of your tests guys. It feels like we're converging on something that works within a variety of hardware. I'm not sure why it seems harder to bring the Angelia in to a general consensus of working well with P2 like the Orions. There's always variables such as the fact it'...
- Sun Apr 28, 2019 4:17 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
- Replies: 44
- Views: 41953
Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
I believe I found the issue causing the antenna switching not to work. Also I made some timing adjustments. If you can please try both of these and let me know which works better. EDIT: see further below... EDIT2: see further2 https://www.dropbox.com/s/9ln9a1gcs3kb2kl/Angelia_Protocol_2_v12.1_pre1_5...
- Wed Apr 17, 2019 6:53 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
- Replies: 44
- Views: 41953
Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Hey Folks, I've made a couple of Angelia (100D) FW images to try with various timing changes. Please give them a try and let me know here which if either work best for you. Best to load them with the Bootloader. https://www.dropbox.com/s/zin81513mjunfbn/Angelia_Protocol_2_v12.0_pre1_5270.rbf?dl=0 ht...
- Wed Apr 17, 2019 2:39 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: 1.8 causes Thetis to close during a PTT
- Replies: 8
- Views: 8301
Re: 1.8 causes Thetis to close during a PTT
Tnx for the Wireshark capture Jeff. It gives me some valuable clues. Also tnx for the testing of various images for a potential fix. If anyone else would like to try this image (so far working for Jeff) for the Orion MkII Protocol 2 here's a link: https://www.dropbox.com/s/00m5b649t5cwwzn/Orion_MkII...
- Tue Apr 16, 2019 2:03 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: 1.8 causes Thetis to close during a PTT
- Replies: 8
- Views: 8301
Re: 1.8 causes Thetis to close during a PTT
I can't repeat this behavior with my 7000 (non MKII).
Any chance someone who is seeing this frequently can get a wireshark capture
on the UDP data going between the SDR and HOST (all ports)?
Tnx,
-Rick / N1GP
Any chance someone who is seeing this frequently can get a wireshark capture
on the UDP data going between the SDR and HOST (all ports)?
Tnx,
-Rick / N1GP