Been running c5 with P2 v1.9 but starting to have intermittent problems with Thetis locking up. Sometimes I'll see a few "seq" errors and then it will lock up. Other times no "seq" errors but an audio cutout then it locks up. I switched to P2 v1.7 with no improvement, more lockup...

Have noticed in ver c4 and c5 when Thetis is shut down on a band other than 20m, the next time Thetis is launched and I select 20m band the drive level has changed to 100, not the lower level as previously set. Anyone else seeing this?

Carl
NX5T

Richie.... Loaded c4 last night and have noticed "Step Tune" of 500Hz is only moving tuner 50Hz per mouse wheel click now. Carl NX5T odd, 500 will become 50 if shift is held at time of wheel change. Perhaps the shift state is locked on somehow will check. Tried it again several times with...

Richie....

Loaded c4 last night and have noticed "Step Tune" of 500Hz is only moving tuner 50Hz per mouse wheel click now.
Also no audio regardless of AF level in RX2.
Thx,

Carl
NX5T

Running c1 full screen on 40" 4k monitor 60fps smoothly...
I did lose the blue panafall background though. Disable picDisplay is not selected.
Is c2 available for download?

[img][/img]

Great job Richie!

Wow! That's a game changer for anyone with a high end system and video card!
Can't wait!
Thx Richie

Carl
NX5T

I have just noticed a bug when running any version of Thetis with either Commander in DXLab or DDUTils. If I try and turn on the CWX tab while running those utilities, Thetis will freeze and crash. If I only load Thetis and not my logging program or DDUTils, CWX works normally. I have had several o...

No worries, and I agree, this is not significant.
Thanks for all your efforts.
Much appreciated.
Carl

Fresh install yesterday showing same gaps others posted....
Carl

Ugh... Not such a silly question. After downloading the correct file, Thetis 2.6.8 installed without issue. :roll: Thank you! Carl ------------------------------------------------------------------------------------ Capture.JPG Got this error trying to install 2.6.8. I have run 2.6.7 and FW 1.9 in t...

Got this error trying to install 2.6.8.
I have run 2.6.7 and FW 1.9 in the past but reverted back to PowerSDR after experiencing some problems after months of no issues.
Rig is an 8000DLE
Any help would be appreciated.
Thx
Carl

I think the single most significant change one can make, if not already in place, is to add a dedicated Ethernet port and subnet to the rig. Regardless of which protocol one may be using, I saw significant improvements to both when the dedicated subnet was created.
Carl
NX5T

I'm puzzled as well.
Any suggestions? Maybe a fresh Thetis database? Maybe load v2.6.7?
It's been working so well for so long I hate to go back to P1.

Thx
Carl
NX5T

Scott.... I continued to test the system with P2 and Thetis this morning and had repeated instances of Thetis being disconnected after hearing the clicking in the 8000DLE. This afternoon I reloaded P1 v2.3 and PowerSDR mRX PS v3.6.9 and have had NO disconnections or clicking from inside 8000DLE. I'm...

I have been running an 8000DLE with P2 v1.9 and Thetis v2.6.6 for several months with no significant issues until today. As of this morning, intermittently, the 8000DLE will emit what sounds like a relay click when selecting a new band. At that point HPSDR turns off, Power button light turns off. So...

Have been running P2 v1.9 and Thetis v2.6.6 on my 8000DLE for about five days now with generally very good results. I have seen a few, very brief SEQ 43, 42, 11 and 8 error message but they do not appear to cause any noticeable issues. The last two days I have had two occurrences of where upon key d...

Scott/Rob.... Today in installed a NIC card in my computer. I then read through Rob's post on moving the Anan to a separate network. I Followed Rob's instructions and it worked like a charm. I did need to go to Bootloader to make the IP change in the 8000, but stumbled through it successfully. This ...

Scott/Rob (W1AEX)... I found Rob's "The ANAN Ethernet Connection: DHCP or Direct Connection with Static IP?" web page which explains all I should need to know to complete this process. Thx Carl NX5T .....and thank you Rob for the detailed explanation on how to complete this process. You tw...

Scott... I'll still be using the router for wireless devices but just not for the 8000. Unfortunately I could probably use some guidance with Programmer or Bootloader, as well as the "network metrics". Sorry, this is all foreign to me. Hopefully I don't FU something that is working well no...

I'm considering adding a PCIe Gigabit Ethernet card dedicated to the 8000DLE instead of running it to the router as it is now. Anyone have any advice or thoughts on doing this before I start would be appreciated. Although I've built my share of computers I don't consider myself a network guy so any ...

The skin is K2GX BW Gem Dark.
For all the noise I've read about HPET I can live with the blowouts since it doesn't appear to be anything more than a visual annoyance.
Carl
NX5T

Rob...

With the amp off I still get the blowout, just not as pronounced.

Gary..
There is no SWR issue noted with the display blowout.


Thx
Carl
NX5T

Rob...

I tried adjusting all of the timings on that page with no noticeable difference.

Thx
Carl
NX5T

I wanted to send this snapshot to show you what happens when I unkey mic. There is a momentary blowout which is disconcerting. The amp shows no corresponding power output but I do see -185 dBm on the PowerSDR meter as opposed to a resting -85 dBm. Any ideas what would cause this and how to get rid o...

Thanks for the explanation Scott.
Carl

I see no PS sma connections. How would a sampler be attached?

Thx
Carl

Rob... I'm sure your aware of the new SSD form factor name, but for those who may not it is referred to as M.2 SSD. The M.2 cards utilize the PCI Express bus rather than the eSATA bus which bottle necks the speed of SSD. M.2 SSD drives are up to five times faster than eSATA SSD drives for not much m...

I do not experience that on my 8000DLE.

Gary... I wasn't talking about case screws. It was the nuts inside and outside the case that hold the PS Feedback and Input connections in place. I too was skeptical that only that could improve my problem. In my mind it was a mechanical fix. Those nuts are not there to be loose, but it's the only c...

Gary... I took the top case off because in the process of changing configurations I found that the the PS case bulkhead nuts and also the 10dB attenuator were loose. I tightened the nuts inside and outside the case. I also checked for cold solder joints on the PS board while it was open. None were f...