Just press any key, and the subsequent screens are generated, until all the running ASIO drivers have been reported.

Hi James,

Unfortunately, you have become the guinea pig for the Audio Volt
Can you email me the detail output screen from hostsample?
What I'm looking for is the not the first screen that comes out, but the one with all the gory details about the Adio Volt.

73,
Bryan

I get the green CM icon on the lower right side of the Thetis display. But, turning the volume up in Thetis or the Volt 1 just produces a high pitched squeaking sound. Hi James, First off, Scott is correct: the Behringer UMC202HD is a no-brainer hookup. If you can get a refund from Guitar Center, I...

What would happen if the driver was not set to 48KHz sample rate? In that case, a request to change to 48,000 is sent to the ASIO API. If that is successful, steps then proceed to bring the driver into its "prepared" state. If not, a debug message is sent reporting the specific trouble, t...

how or where do I select the inputs and outputs on my interface that I want to use to be the Anan speakers for output and the mic for input? Hi Terry, Thetis uses Input_1 & Input_2 for transmit (mic) audio and Output_1 & Output_2 for receive (headphone/speaker) audio. It's hard-coded, nothi...

I have used the hotsample.exe. It says "RODECaster" and when I add the string to registry, then reboot thetis; it says issue starting cmASIO check driver name in registry. Hi OM, Can you please send me (by PM or email) the complete output from the hostsample.exe utility? Since the RODECas...

I am running the 7000dle MKII (protocol 2) with a RODECaster duo and the ASIO drivers are installed for it. Is there something I am missing or is it incompatible? Hi OM, I don't have any experience with the RODEcaster, so it looks like you are the first to try :-) What was the text you used to popu...

2) Can LockMode function even though my Motu interface isn't on the same clock as the ANAN or my computer? 3) How does one verify that LockMode is actually functioning? I ask because I have the ASIOblocknum DWORD high bit set but I'm seeing no difference in core workload using CPUID Hardware Monito...

So, essentially I gave cmASIO a go then disabled it in case the registry setting was interfering with VAC to/from the radio. Hi Dave, Okay, I understand now. Thanks for explaining! In that case, you'd be better off to delete the ASIOdrivername string value, which will return your rig to its default...

I'm no audio expert so I suspect a wrong setting has got into my audio chain accidently as a result of the cmASIO changes in Thetis. I have made sure that the cmASIO Registry changes have been disabled by putting in a false ASIO name. Hi Dave, Just out of curiosity: please help me understand why yo...

Hi Joe, Yes, that's a valid entry for the registry key value. You might want to first try ffff0006 just to get your feet wet using blockMode. That way, you're not being too ambitious with the receive audio stream at the same time that you're trying to push the transmit audio stream. Once you see tha...

I use the UMC202HD and it works fine with cmASIO on input channel 1. Is there anyway to switch to channel 2 on he 202HD using cmASIO in order to select a different microphone without having to use VoiceMeter? Hi Joe, Yes, cmASIO picks up both input channels on the 202, just plug in the mic and turn...

I feel jealous because I can't make it flash here

Yes, slow as a slug!
Good catch on the thread view count, though.

Surely, Abhi doesn't host this on his own server?

Can't duplicate your bug.
Works fine here OM

Just turn off CAT/TCI and it works FB

Hi Tony,
Not seeing the blinking cmASIO icon, looks steady here on pre-5.
My CAT/TCI icon is OFF however.
73,
Bryan

Well I dont believe it, I have it working, So I've set the output of VoiceMeeter to the M-Audio M-Track Solo ASIO 48khz 64 Changed the Registry entry to Voicemeeter Virtual ASIO Started Thetis and I got a green cm speaker !! Audio is now routed via Voicemeeter to the M-Audio and the internal sound ...

Placebo effect

Update from here So I tried the M-Audio on a laptop, had the same results Hi Jim, As far as I know, you are the first user to try the M-Track Solo (or any M Audio device for that matter) with cmASIO. So, it's possible that the M-Track ASIO driver is just plain incompatible with cmASIO. I will have ...

Correct me if I am wrong but isnt cmASIO designed for hardware ASIO devices? Just reconfigured to use cmASIO last night and it works great on the Scarlett, got VAC working on both receivers so I can send audio to OBS and the digital recorder without impacting ASIO. Could never do that before and is...

Hi Mark,

Look to the right. Richie moved it for pre-release-5, but it's still there!

73,
Bryan

Exactly the same results, rebooted PC, M-Audio M-Track set to 48000 and buffer size 64 I'm going to try the M-Audio on a different PC Hi Jim, One more thing I just remembered you should check. When you populated the registry key value with your driver name, if you left a trailing space at the end o...

I see your VAC1 is enabled.
What is it connected to?

That's correct Tony, about the sampling rate. Repeat all of yours above, but this time with the M-Audio sampling rate having been set to 48000 in advance. Looking at your debugview output suggests that you may have had the hostsample detail screen open while Thetis was trying to start. Because it's ...

K4IBC wrote:Should he change his regedit to the M-Track Solo and Duo ASIO not VM?

He did that already, as reported in the debug dump.

So I have the M-Audio M-Track Solo and have installed the software Using hostsample I get driverCount = 5 ASIO4ALL v2 M-Track Solo and Duo ASIO Voicemeeter AUX Virtual ASIO Voicemeeter Insert Virtual ASIO Voicemeeter Virtual ASIO Press any key to continue . . . Hi Jim, Was that the only output from...

Hardware is nothing special, either the on board sound card or a pair USB headphones. Where can I find the buffer setting please as I've looked in the driver and cannot see the buffer setting. Hi Jim, Are you sure that your on board sound card and/or your USB headphones have an ASIO driver? If so, ...

KC2QMA wrote:Got It
https://community.apache-labs.com/download/file.php?id=3984

That's an early version of the instructions.
See the Thetis folder after installing pre-release-4 for a pdf of the most recent version

Yes it does. The lockMode will be enabled.