Hey Joe, Thanks for your reply and work/coding around Thetis to try and rectify the issue Terry and I have been discussing. As for development etc, its a community based support system and development. Cudos to you for giving it a go mate. I will download your tweak/version of Thetis 2.10.1 and give...

Well I tried 2.10.1 over the top of 2.9.0.8 final version yesterday. I thought it was working as I managed to close and reopen Thetis and the frequency and mode were retained. But at that point I had only used one band. As soon as I tried other bands and moved several of their frequencies away from...

Well I managed to break the Band Stack issue by loading an Audio profile from another Database/version of Thetis into 2.10.1. Luckly I had saved the original database to revert to without having to go through the process. So don't load saved/exported audio profiles. I had to recreate mine. Also I am...

So in this case to make 2.10.x work we need to do everything we have been told not to do previously and you can make it work. Your findings confirm my earlier tests anyway Phil. Are you going to run 2.10.1 for a while to see if it stays stable? or revert to 2.9.0.31 Terry. GW4NNO Terry, Yes, there ...

The problem didn't exist in in Steve's 2.9.0.27 and earlier builds. I did mention it in a community thread somewhere (I can't find that thread now) but I never reported it to Steve because he ceased taking bug reports soon after releasing 2.9.0.29. Mark Thanks Mark for that update. I have Steve's 2...

Ok, so I installed Thetis 2.9.0.8 (final release) and setup the database. All working well. Then installed Thetis 2.10.1 over the top, ran Thetis and let it update the database, all working as it should. Then I deleted the database that was imported/updated by Thetis and commenced with a new databas...

A clean instal of 2.10.1 (or 2.10.0) ,without a previous verion of Thetis installed, the band stack memory does not work. So far my test where 2.10.1 worked was to install 2.10.1 "over the top" or over the existing version of Thetis already installed. As I said, I'm about to install the &q...

Ok, so Thetis 2.9.0.8 MW0LGE (pre-release) band stack saving works. Now I will upgrade to Thetis 2.10.1 over the top. Final result. Installing Thetis 2.10.1 over the top of Thetis 2.9.0.8 pre-release, the band stack saving is working and saving where you last left off. I'll try the same process wit...

Anyway, I am installing the "pre" release of Theits 2.9.0.8 and will test the Band Stack behaviour. If all ok I will then install Thetis 2.10.1 over the top and see what happends..... Ok, so Thetis 2.9.0.8 MW0LGE (pre-release) band stack saving works. Now I will upgrade to Thetis 2.10.1 o...

It sure is! but you know what I mean. I'd like to stick with the "official" releases if possible but at the moment it seems it is not possible. What is "Official"? There are so many pre releases of this software. Thetis is not commercially developed and published, its not even s...

GW4NNO wrote: I certainly wish we could find some work around for this problem.

Terry GW4NNO

You have it... Its Thetis 2.9.0.31

I agree Phil. I tried doing another clean install 0f 2.10.1 yesterday evening after having got 2.9.0.31 working perfectly. I renamed old directories and after installing 2.10.1 with a clean database same old issue was back with no recall of frequency or mode after a restart of Thetis. I'll stick wi...

Thanks for the response so I can rule out Windows hopefully. Guess I'll role the Thetis version back well :). Is version 2.9.0.31 coming from Steve G7KLJ? If so, he may have added code that is not in accordance with the GPL v2 license that Thetis must be released under. This may also be why it is n...

IMO whenever anyone observes a peculiar behavior crop up in Thetis that no one else is seeing, after it becomes apparent that reasonable steps to fix the problem aren't working then the next step should be to rename the database (effectively equivalent to deleting/resetting it) and restart Thetis t...

Phil, do you have a link where I can download Thetis 2.9.0.31? I can't seem to find it. I have an Anan 7000DLE mkII not an HL2 but I presume 2.9.0.31 will work for on my rig too. I'd like to give it a try anyway. Terry. GW4NNO Hi Terry, Email sent to your QRZ email address for G4NNO. Yes it works p...

Thanks for the response so I can rule out Windows hopefully. Guess I'll role the Thetis version back well :). It's not a Windows OS issue casuing it. I've had this issue whether running Win11 or Win10 (PRO, Enterpise or LTSC) and on different pc's (laptops and desktops). I (and many other ham mates...

..

W4WMT wrote:Take what?

Hehe, Bryan.. I was preempting that if it might get tossed? I'd take it..

I'll take it...

I like radios with knobs and without knobs. The actual Andromeda with the Intel NUC inside is interesting to me as well. The only downside I haveheard about is cooling problems a couple of guys I know have had with the Andromeda because of the NUC inside. Their concept was a good one, however the e...

An Andromeda panel will not provide any performance improvement. It will use the same display connected to the Pi in the same way as the current product and displaying the same Raspbian desktop environment. The only difference will be with the buttons and knobs. While there is an esthetic involved ...

Apart from Thetis 2.10.0 or 2.10.1 having bugs in it, including PS. Are you using an amplifier with an external or internal sampler or just the radio 100w? Check that you have the correct ATT on Tx option ticked. A 200D running the Rev.16 PA board, you need to select Ext 1 on Tx in the setup (under ...

Hello Abhi, Not receiving any more response to my last emails, I'm afraid you won't receive them. So here they are again, but I'm still surprised that I haven't heard from the Orion card and the NUC that you had to send me +/ the week of August 10, 23. I hope that via your forum my message will rea...

I've seen this on setups where RFI and issues in the firmware (P2 and P1) was generated internal crosstalk on the feedback. I've had success in correcting these issues through applying several "tweaks" in the OS running thetis, Networking. Reach out if you require assistance, happy to help.

Dave30019 wrote:These work very well for supplying phantom power to a mic. There are other brands available as well.
https://www.amazon.com/Nady-SMPS-1X-1-C ... B000XUUXB8

Dave
k4em

Neat little unit and cheap too.

WT4DX wrote:Dennis,

Do you have a mic with an XLR cable to test the XLR microphone input?

73,
Tem
WT4DX

That would be good if the unit actually had an XLR input. I know the letters XLR are printed on the back, but no XLR connection.

I too have reported this issue with Thetis v2.10.0 in another thread. I started with a clean database each time. Interestingly, on 40m Thetis seemed to remember the last used frequency. All other bands will always start at the beginning of the band. I've reverted back to an earlier version (v2.9.0.2...

Thanks,

I've tried the following versions of P2 firmware for hardware using the 5CEFA9F31 Cyclone V series FPGA.

Metis_Orion_MkIII_CV_P2_v2.1.12A
Metis_Orion_MkIII_CV_P2_v2.1.12B
Metis_Orion_MkIII_CV_P2_v2.1.12C

And the latest offering - Metis_Orion_MkIII_P2_CV_21.7

You can still find the D version here: https://community.apache-labs.com/viewtopic.php?f=32&t=4292#p21307 Thanks for the link Scott, however I'm looking for the CV version as posted: Orion_MkIII_ CV _P2_v2.1.12D I've got another Andromeda which wont run any of the P2 firmware files stable, cons...

Would anyone happen to know if there was a P2 firmware version released, Orion_MkIII_CV_P2_v2.1.12D.rbf?

If so could someone send me a copy please? email is my callsign at hotmail.com

Regards