Search found 270 matches
- Sun Nov 03, 2019 4:58 pm
- Forum: Remote Operation Over The Internet
- Topic: Remote Operation like Smartlink
- Replies: 6
- Views: 13696
Re: Remote Operation like Smartlink
I have an Anan 7000dle working remotely without any issue. My setup is as follows: -Anan 7000DLE conected to my home lan. -Raspberry Pi working as a VPN (virtual private network) and USB server (for rotator control, take a look at http://www.virtualhere.com/ ). -VPN Ports are open in my router. -Rem...
Re: 2.6.8
Tony EI7BMB wrote:Just took a look at the SEQ log after a few hours and its blank. I'm hoping this means no errors
I hope so...
Re: 2.6.8
UPDATE HI all, Please try : https://www.dropbox.com/s/eh9dn1ongtd5lqw/Thetis_0552_301019_d5.zip?dl=0 Just a WIP build, that hopefully fixes some annoying issues. Includes the initial pass of SEQ logging. The 'special panafall' mode wont return until the displays are 'split' and the mid point of eac...
Re: 2.6.8
ADVICE for all people having Seq errors: After reading in Latency monitor help page, that "hard pagefaults are the most common cause of audio dropouts" I've followed one of the suggested solutions: Disable the pagefile (windows Virtual Memory) altogether. You can disable the pagefile by r...
Re: 2.6.8
ADVICE for all people having Seq errors: After reading in Latency monitor help page, that "hard pagefaults are the most common cause of audio dropouts" I've followed one of the suggested solutions: Disable the pagefile (windows Virtual Memory) altogether. You can disable the pagefile by r...
Re: 2.6.8
Well today I have tried Thetis c5 with P2 v1.7, v1.8, v1.9 (which has been working fine until today), v2.0 pre-beta. None of them are working well enough to use for any length of time, let alone reliably. I'm beginning to think it may be the current Thetis c5 and not the firmware. Don't know what c...
Re: 2.6.8
Richie, I have noticed another issue that has cropped up between b4 and b5. With b5 if I size the GUI to be larger than say 25% I get pops & clicks on both RX and TX. I have the FPS of Thetis set to 30FPS as you suggested but I have tried more and less with no joy. On b4 I have no issue. This h...
Re: 2.6.8
I've detected a small/non important issue...
This version doesn't show the correct band allocation for Spain. In 40m we are allowed to use 7.000 to 7.200 and it is showing 7.300 as the upper band end (USA band plan).
This version doesn't show the correct band allocation for Spain. In 40m we are allowed to use 7.000 to 7.200 and it is showing 7.300 as the upper band end (USA band plan).
Re: 2.6.8
Hi, For those having issues related to region/language (ea3aqr SA3ATF etc) please try : https://www.dropbox.com/s/s2376eb4xf99y3i/Thetis_b6_0137_180919.zip?dl=0 You will need to delete/remove/reset your database, and possibly your memory.xml file if those have become corrupt. Richie. changes (b6) c...
Re: 2.6.8
NEW BUG:
Same crash when trying to ad a "memory".
Rolling back to 2.6.7
Same crash when trying to ad a "memory".
Rolling back to 2.6.7
Re: 2.6.8
ramdor wrote:ok, it is language issue, when I change windows over to Spanish (and probably) others the ,. issue happens when reading from db. 24.odd becomes 24 thousand with a ,
Will look into. Cheers to SA3ATF who mentioned it a couple of times
GREAT!
Re: 2.6.8
BAD NEWS... Same crash again without enabling DX Spotter. Yeah thought so as it seemed ok on my installed (and others), but I did fix the click on yellow area bug in the spot window :lol: Is this after a fresh install, after an uninstall, with removal of C:\Users\<user>\AppData\Roaming\OpenHPSDR ? ...
Re: 2.6.8
BAD NEWS...
Same crash again without enabling DX Spotter.
Same crash again without enabling DX Spotter.
Re: 2.6.8
Update 1 No Microsoft .Net 4.8 installation possible, setup stops because I have a newer version already installed... Please you use regedit to check key... Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP\v4\Full look for Release Dword on the right hand side. You should see d...
Re: 2.6.8
Hi! It was this that I tried to explain a bit above here. It was the same phenomenon in the last big release of Thetis and then it worked if you changed the language of the computer to English which I have not been able to test this time. It is different how comma and dot are used what I can see in...
Re: 2.6.8
FOUND!
Looks like the problem is the DX spotting option.
Setup was fine until I've activated this option, on the next click on the screen to tune a station I had a crash.
I was recording all my setup process. I will upload it to Youtube and link the video when done!
Thanks for you help!
Looks like the problem is the DX spotting option.
Setup was fine until I've activated this option, on the next click on the screen to tune a station I had a crash.
I was recording all my setup process. I will upload it to Youtube and link the video when done!
Thanks for you help!
Re: 2.6.8
Update 1
No Microsoft .Net 4.8 installation possible, setup stops because I have a newer version already installed...
No Microsoft .Net 4.8 installation possible, setup stops because I have a newer version already installed...
Re: 2.6.8
Jordi, As the others have said, try just installing the new version: Thetis_v2.6.8.0_Setup_17Sept19.msi from https://github.com/w5wc/Thetis/releases/tag/v2.6.8 and setting up as a new install. Run Thetis and see if it is stable. If all ok running normal then introduce your TX profiles one at a time...
Re: 2.6.8
I'm not importing the old database, i'm building it from scratch in a total new installation... I just import my transmission profile first of all and looks like Thetis works well, then, when I start to set up my configs (I have them stored in pics), somewhere it crashes (not always on the same conf...
Re: 2.6.8
Impossible to set up new thetis 2.6.8 on my Anan 7000 DLE running P2 2.0 Pre1. Always ending with a crash. I've deleted all directories (in "program files" and "users") and started building it 100% from scratch (except for my transmiting profile that I always import). Today, with...
- Tue Sep 10, 2019 9:07 pm
- Forum: Thetis
- Topic: My Mods to Thetis v.2.6.7
- Replies: 30
- Views: 19872
Re: My Mods to Thetis v.2.6.7
Me too... but after a database reset, crashed again when doing config for the second and thrird time.
Rolling back until a stable release!
Rolling back until a stable release!
- Tue Sep 10, 2019 8:50 pm
- Forum: Thetis
- Topic: My Mods to Thetis v.2.6.7
- Replies: 30
- Views: 19872
Re: My Mods to Thetis v.2.6.7
it's not me... Just found the link doing a Google search...
I'm rolling back to 2.6.7. New build corrupted my database 3 time just tring to set up my settings.
Waiting for the "formal release".
I'm rolling back to 2.6.7. New build corrupted my database 3 time just tring to set up my settings.
Waiting for the "formal release".
- Tue Sep 10, 2019 5:05 pm
- Forum: Thetis
- Topic: My Mods to Thetis v.2.6.7
- Replies: 30
- Views: 19872
- Tue May 14, 2019 9:14 am
- Forum: Thetis
- Topic: Thetis 2.6.7 some issues to fix on next release
- Replies: 8
- Views: 8758
Re: Thetis 2.6.7 some issues to fix on next release
Anan 7000DLE Thetis 2.6.7 Fw: P2 v2.0 Pre 1 Isuues: 1) The On screen spotting option so many time shows the spotter callsing instead of the DX station 2) Tune step changes randomly from my default selection (100hz) to 10hz. To correct this issue I must clic on VFO A frequency to select it all and th...
- Tue Apr 23, 2019 5:33 pm
- Forum: Thetis
- Topic: Thetis 2.6.6 released
- Replies: 6
- Views: 6408
Re: Thetis 2.6.6 released
Check in the left side under "profiles" (setup/transmit)
- Tue Apr 16, 2019 2:32 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: 1.8 causes Thetis to close during a PTT
- Replies: 8
- Views: 8317
Re: 1.8 causes Thetis to close during a PTT
Same problem on Anan 7000 DLE.
Rolling back to V1.7
Rolling back to V1.7
- Tue Mar 05, 2019 10:31 am
- Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
- Topic: Critical Update for all radios shipped after Dec 2018
- Replies: 7
- Views: 15112
Re: Critical Update for all radios shipped after Dec 2018
PROBLEM SOLVED!
For no reason yesterday the update changed my radio IP from 192.168.1.101 to 10.10.30.10
After discovering that my radio was on a different subnet it was easy to change the IP and reload again the P2 firmware via bootloader.
Anyway thanks for your help!
For no reason yesterday the update changed my radio IP from 192.168.1.101 to 10.10.30.10
After discovering that my radio was on a different subnet it was easy to change the IP and reload again the P2 firmware via bootloader.
Anyway thanks for your help!
- Tue Mar 05, 2019 7:27 am
- Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
- Topic: Critical Update for all radios shipped after Dec 2018
- Replies: 7
- Views: 15112
Re: Critical Update for all radios shipped after Dec 2018
Hi Scott,
Unfortunately HPSDRBootloader is unable to discover my radio... I'm stuck at point 9 and can't go further.
Bootloader doen't shows my board mac address.
My radio had a fixed IP (192.168.1.101) but it doesn't longer responds to my pings.
Unfortunately HPSDRBootloader is unable to discover my radio... I'm stuck at point 9 and can't go further.
Bootloader doen't shows my board mac address.
My radio had a fixed IP (192.168.1.101) but it doesn't longer responds to my pings.
- Mon Mar 04, 2019 11:51 pm
- Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
- Topic: Critical Update for all radios shipped after Dec 2018
- Replies: 7
- Views: 15112
Re: Critical Update for all radios shipped after Dec 2018
Hi, I've installed the new firmware in my Anan 7000DLE. After installing the new firm Thetis was unable to discover my radio... tried to roll back using HPSDR Programmer P2 without success, no radio was detected. Then checked my radio with OpenHPSDR and it worked (why protocol 1 worked ¿¿??, it shou...