I have done extensive work with both analog and digital diversity reception over the past few years, particularly for simple beamforming and interference cancellation. John, That's quite a body of work there. In your role as an evangelist for this sort of thing, I would strongly encourage you to ma...

The forum email problem is now fixed.

Not getting email notifications for subscribed topic or forums. Checked my preferences and it is set to receive email notification of new post to subscribe thread or new thread. Yes, this is an ongoing problem. It's been broken for about 2 weeks, and the hosting folks are continuing to work on a so...

va7qi wrote:The correct way to change the font in Thetis is by going into Settings/General.

And how exactly can that be done? I see zero options for changing font or font size in Thetis.

There are some subtleties. I'm running Win10Pro, a 4K display, and it runs at 150% scaling no problem.

Does RX2/ADC2 work normally outside of diversity mode?

What connections did you make on the back of the 7000?

Protocol 1 or 2?

Post a screen shot of your DDC assignments.

The schematic should always be trusted more than the manual. I don't know what manual you are using, but if you are quoting from it verbatim that manual is clearly wrong. I am using the schematic found here: https://community.apache-labs.com/viewtopic.php?f=35&t=2549 And the manual found here: h...

Moved this to it's own thread as it was a user configuration problem and not directly related to 14-bit Hermes P2 firmware.

Hi group, I have done test( only for receiving) here in my environment. The result is the following: Tokio, The conclusions you are drawing from your results are incorrect. The reason you are having problems with P1 and Thetis 2.9.0.6 are almost certainly because of Windows firewall problems on you...

They don't understand Thetis, no hardware required.

Although it's $25, I prefer Eterlogic VSPE.

If you want free, go with com0com.

I think I got the N1MM to follow the radio around. All that is missing is how to get cluster spots switched on. In N1MM you need to bring up the bandmap window, which is where the spots are shown. What spots are shown, and from what servers ("clusters") is selected in the Telnet window. I...

The firmware installed is Protocol 1 Hermes v1.5. With this firmware, PowerSDRmrx3.4.9 as well as Thetis v.2.8.11 are working apparently. But Thetis v2.9.0.6 does not work. There should be no problem with Thetis 2.9.0.6. What symptoms are you having when trying to run it? So, to change the firmware...

Process wise, whats the procedure? I'm running 2.9.0.6 right now and on windows 10 home x64. Do I have to uninstall 2.9.0.6 first???? No, you can install right over the top. However, then it becomes difficult to go back to the previous version. Reverting back can be very important when dealing with...

Related to this and other software upgrades - can I install it on a completely different computer and then just plug ethernet from that computer into Anan 7000 instead of ethernet cable coming from Thetis running in my primary computer? We shouldn't make this topic about networking but, yes, under ...

Good day peeps! I have a question, is the new meters developed by our good guys downloadable right now? By the way they look very nice! Kudos to the developers! The folks above are taking Richie's incomplete work directly from his Github repository and compiling it themselves. You would need to ins...

There are no "hidden menus". Any properly saved TX profile can always be recalled flawlessly. Confusion often results if you have the TX profile auto-save options enabled in Settings > Transmit. I strongly recommend those be turned off and TX profiles be manually saved as required. This wa...

The best way to get in touch with Doug is as follows:

dwigley@apache-labs.com or support@apache-labs.com

I am still using the mic boost, without this I have to increase the mic gain from 10 to 45 to get a reasonable audio level and then the echo is still present. I do have the mic bias set correctly as it doesn't work at all if I change the jumper. While it probably has nothing at all to do with this ...

Sorry for the delay in replying, been busy. 5 months later is very busy, ha ha :D So maybe my comment about being RF was incorrect. So how do I stop it, I can reduce the output power to less than a watt and the problem is the same, into either a dummy load or antenna. That's very odd, especially si...

I'll be very interested in your review and impressions of the new design, as will many others, no doubt.

I can't speak to the behavior of the unit when overheating, however all of the units other than the 8000 use the external chassis as a heatsink for the main heat producers, which are the 100W RF amplifier FETs. Those FETs are mechanically attached directly to the chassis. Because the mechanical desi...

I've read all the literature, the forum posts, watched the videos, and I'm still having a hard time totally wrapping my noggin around what you're saying regarding Pre-Comp. Is this just an overall compression slider? No. I haven't found that to be shown on the CFC Comp meter. Can you explain more r...

Don't understand why this was posted in the networking sub-forum so it has been moved.

And...see: viewtopic.php?f=17&t=3914

Although it is 6 years old now (I can't believe it has been that long!), I made a video that shows how to program MIDI controllers. At 7:30 in the video it discusses how to control button lighting.

Short answer: no. Longer answer: you can go to Setup > Display > TX and change the waterfall levels to high = +70 and low = +60 and nothing will be recorded on the waterfall during TX, however the waterfall will continue to run vertically. BUT...you will still see the "noise burst" artifac...

I just tried this with Thetis 2.9.0.6, on an 8000 with Protocol 2. I could not duplicate this problem. Split works perfectly for me on CW.

Are you running Thetis 2.9.0.6?

It can't be a hardware problem because you can hear MON audio. Is Master AF turned up? Is RX1 AF turned up? Is MUT off? Is AGC Gain set appropriately? And your version of Thetis is ancient. You should upgrade to the latest version of Thetis, 2.9.0.6, which can be found here . The x64 (64 bit) versio...

Horses for courses. Every direct sampling HF transceiver on the market has something to offer. If only we could get all the best features in a single radio. We can't, so we have to choose, and choices involve trade-offs. But discussions like this are good, because there always needs to be some press...

Seems like we got 80% of the way there and then went on cruise control design-wise. A truer statement was never written. Historically speaking, this is exactly what one would expect, for a variety of reasons. First, it is important to remember that the basis of the present day designs remains the o...

BIGBOY wrote:Scott i thought the dj control starlight does not work?

My bad! Sorry! I put in a search of "DJ Control Compact" and that popped up. You are right, clearly that is the Starlight version which we do know doesn't work