Search found 130 matches
- Sat May 06, 2017 3:39 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: ANAN-100B Pure Signal Connection
- Replies: 23
- Views: 25000
Re: ANAN-100B Pure Signal Connection
Hi Bernhard I have transplanted my 200 D in a home made enclosure and I have a coax relay which cuts off or not (switchable) the RF input to RX1 during transmit. When NO external sample is fed into RX1 during transmit there will be no Pure Signal triggering by the crosstalk RF even at 125 W output p...
- Sun Apr 30, 2017 8:38 pm
- Forum: Orion Firmware (200D)
- Topic: New Protocol 1 (current protocol) firmware Orion_v4.9 available for Orion/ANAn-200D
- Replies: 6
- Views: 16617
Re: New Protocol 1 (current protocol) firmware Orion_v4.9 available for Orion/ANAn-200D
Hi Joe,
I installed v4.9 on my Orion board and everything runs smoothly. I suppose v4.9 is the official release of
the v4.9test version I tried before.
Big thanks for your good job.
73s Phil FM5GB
I installed v4.9 on my Orion board and everything runs smoothly. I suppose v4.9 is the official release of
the v4.9test version I tried before.
Big thanks for your good job.
73s Phil FM5GB
- Fri Apr 28, 2017 12:10 am
- Forum: PowerSDR mRX
- Topic: Wave File Recording??
- Replies: 4
- Views: 6132
Re: Wave File Recording??
Hi Bill, I recently recorded a DX station and played his audio back : I was surprised because the level was very low compared to my audio from the microphone preamp (10 w vs 100 w output). I do not remenber having had this issue with PSDR 3.3.9. (i'm now under v 3.3.15). I also wonder if there is an...
- Mon Apr 24, 2017 10:22 pm
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: No Cooling issues here :)
- Replies: 5
- Views: 7055
Re: No Cooling issues here :)
Nor here.
- Wed Apr 19, 2017 2:44 am
- Forum: Orion Firmware (200D)
- Topic: New current protocol (Protocol 1) firmware for ANAN-200D version 4.8 released
- Replies: 19
- Views: 31616
Re: New current protocol (Protocol 1) firmware for ANAN-200D version 4.8 released
Hi Joe, I did test FW v4.9_test1. Now Pure Signal behaves normally : - feedback indication and correcting both light up (feed back turning red when I disengage crosstalk with no external sample- I have a coax relay on RX1 input) - signal monitoring on an external receiver shows excellent correction ...
- Tue Apr 18, 2017 10:49 pm
- Forum: Orion Firmware (200D)
- Topic: New current protocol (Protocol 1) firmware for ANAN-200D version 4.8 released
- Replies: 19
- Views: 31616
Re: New current protocol (Protocol 1) firmware for ANAN-200D version 4.8 released
Hi Norbert I did several flashes back and forth. And no luck PS will not work under FW 4.8. I tried all tricks : resetting database, importing data base. Nothing helped. PS does'nt even show any feed back, correction or even waveforms in the amp view. So I'ma back again on FW4.7 :?: 73s Phil FM5GB
- Mon Apr 17, 2017 1:45 am
- Forum: Orion Firmware (200D)
- Topic: New current protocol (Protocol 1) firmware for ANAN-200D version 4.8 released
- Replies: 19
- Views: 31616
Re: New current protocol (Protocol 1) firmware for ANAN-200D version 4.8 released
Hi all,
I flashed v4.8 : installs flawlessly but no Pure Signal operation is possible. I had to return to v4.7
73s Phil FM5GB
I flashed v4.8 : installs flawlessly but no Pure Signal operation is possible. I had to return to v4.7
73s Phil FM5GB
- Thu Apr 13, 2017 7:38 pm
- Forum: Thetis
- Topic: Thetis performance reports?
- Replies: 10
- Views: 13799
Re: Thetis performance reports?
Hi Scott, Please dont misundertand me; I'm not complaining. I'm just reporting in order to help the software developers to identify problems. My post was intended to move others to test digital modes on their system under Thetis and NP firmware to see if the issue occurs on different setups. Of cour...
- Tue Apr 11, 2017 9:28 pm
- Forum: Thetis
- Topic: Thetis performance reports?
- Replies: 10
- Views: 13799
Re: Thetis performance reports?
Hi John & Scott, I experimented recently with Thetis v 2.3.11.0 & FW v1.1 for Orion. I did not test it extensively but I could get quite an idea about this setup. 1- FW v1.1 is much more stable on my system than v0.7 was. I could'nt get it to hang. :) 2- Computer load is much LESS under Thet...
- Sun Apr 09, 2017 10:24 pm
- Forum: PC's & Homebrew Hardware
- Topic: My Homebrew Hermes - Hercules 100W
- Replies: 6
- Views: 8456
Re: My Homebrew
Hi Franck,
great job you've done !
I did also rebox my 200D, (to be seen on QRZ.com) but your setup is very professionnal
Congratulations ! Beau Travail !
73s Phil FM5GB
great job you've done !
I did also rebox my 200D, (to be seen on QRZ.com) but your setup is very professionnal
Congratulations ! Beau Travail !
73s Phil FM5GB