Hello Mark,

my KPA500 is showing the same behaviour with my ANAN 10 and/ or my K3. You will notice that on 10m and on 6m especially.

73

Volker

DL4ZBG

Hello,

does anybody have a spare PCB for Controller V2 he wants to give away (sell)?

TNX

Volker

DL4ZBG

Very interesting. Seems that the Andromeda Frontpanel PCB has been redesigned. Biggest improvement seem to be the molex DC contactors. Feel free to post a few more fotos!

mni tnx

Volker

DL4ZBG

Rev5f! I disconnected the leads
Now I separated the Panel from the PCB, but still no different result. Seems that I have bricked the panel. Ingcool display works fine.
Arduino functions are working!

BTW: do I really need the PWM? I don't think so...

Thanks

Volker

Laurence, 1) Cable is ok. Checked 2 different ones. Both work with Ingcool display. 2) Display was not detected by my Lenovo laptop, Ingcool display worked. When I first started the NUC, the Newhaven display worked ok, but when I started my Arduino (PWM connnected) the screen got black. Touch functi...

Hello, my Newhaven display (IPS touch, original version) is not detected correctly by my Intec NUC. Resolution is fixed 640x480. (Digital flat screen monitot 640x480 60Hz) My previously used Ingcool 7" works fine. I cannot find any hardware drivers for the Newhaven display, nor does Hardware de...

Hello,

does anybody know the correct manufacturer and type of the plugs used inside to connect to J44 (Orion board) and J08/J10 and the fan? TNX

TNX

Volker

DL4ZBG

Thanks for the fotos. With these kind of relays I managed to switch 5 watts on 144MHz. I would not dare to use them for 100 watts. What do you think how long they will survive?

cheers

Volker

Can you share photos of the installation?

73

Volker

I soldered a shielded cable directly to pin 7 (Line Out Left ) and 2 (GND) of the I/O board. I noticed some RFI (hum) due to ground loop effects. The use of an AF transformer may help.

73

Volker

DL4ZBG

Hello 4L5O, there does exist a cable for the ANAN-100; this works only correctly for the 100D (CW straight key to DB25 plug ist not supported for the 100, I reported to Jozef OM7ZZ): http://www.microham.com/Downloads/DB37-AL-100.pdf I purchased this cable last year from WIMO for my ANAN-100 and adde...

I have been running UCXLog with both my K3 and my 7000 DLE (SO2R) with microHam MK2R+ and/or VSPE Eltima virtual ports for years- no problems. I tried K5FR VSPM as well. If you are using VSPM virtual ports you can forget about using microHam stuff. Grrrr

73

Volker

DL4ZBG

Helped a lot, TNX Sigi

Paul,

do you have photos showing the new relay and the mod for RL19 and 36 for the 7000 DLE?
I think it will be a good ideal to modify Thetis in order to activate an OC output in CW mode or something similar.

Volker DL4ZBG

This display is currently NOT available, as everybody interested in this project knows (and will not be for months). In order to get further, I bought this one in the meantime: https://www.amazon.de/gp/product/B08RHXP9J4/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Resolution will be scaled ...

Hello, the original display from Newhaven (NHD-7.0-HDMI-HR-RSXP-CTU) seem to be unavailable at the moment. Did anyone tried a different display e.g. https://www.amazon.de/Waveshare-7inch-HDMI-LCD-Resolution/dp/B07CPBCZHB/ref=sr_1_3?keywords=7%22+Touchscreen+HDMI+1024x600+Waveshare&qid=1645830539...

Interesting Product!

Which firmware will be on the board?
The same as for the ANAN 10E?
Who will provide updates?

Should make some sense adding this usefull information to the Thetis manual !?

All clear, TNX

Thanks,

is there a list of all possible start options available? I did not find it the Thetis manual.

73

Volker

Hello,

is there an option to start Thetis with directly activating the radio without clicking the "start"- button?

TNX

Volker

DL4ZBG

One relay is not enough.... 4 years ago I had a mail exchange with Kjell LA2NI who intended to create a Pin Diode T/R switch..... In case of the 7000DLE you have also to consider changing/dealing with RL17,RL19 and RL36 for RX2 grounding. https://www.youtube.com/watch?v=QDYfEBY9NM4 73 Volker DL4ZBG

Hi all,

just finished my Hermes/Hercules Combo...
I know I'm late. Does anybody know where to get Andromeda PCBs?

TNX

Volker

DL4ZBG

Good morning "JJ",

I've been running my 7000DLE/ACOM2000A combination for quite a while.
DDUTIL interface works ok.
I never tried to use "Key Out".

Normally I do not write replies which cannot be helpfull for the starter of a topic.

73

Volker

DL4ZBG

That's what I expected. More than 100 looks but nobody knows a solution.

TNX Erik for reply

73

Volker

Hello,

a ham friend of mine is using piHPSDR from time to time. He is wondering whether there is a calibration menue for the S-Meter similar to Thetis/HPSDR.....

I did not find anything like this in the piHPSDR manuals. Is there a way to calibrate the S- meter?

TNX

Volker


DL4ZBG

My suggestion:

option to swap hi/lo cut of varaible filters for LSB (just like the K3 does)

73

Volker

DL4ZBG

viewtopic.php?f=14&t=2977&p=6607&hilit=DIG2#p6607

73

Volker

Hello all, today I started to try a 32 Bit version of Thetis on an old Win 7 computer. NET 4.8 has been installed. After Installation has finished, Thetis refues to start: Thetis_Issue.png tried 2.8.9 and latest 2.8.11 version. Installed and de- installed multiple times. I do have administrator righ...

Consider using DDUTIL with serial interface for connecting Expert PAs. I am using it for my ANAN/ACOM setup.

73

Volker