Dear Scott, Sorry if I'm confusing you , I'm no spring chicken.The radio receives perfectly ,it transmits but there is NO clean audio in the signal!
It sounds li9ke random noise, ?

Dear Scott,Thank you for your interest. The mics involved were RE-320,MK-4 and MXL-R144 all settings on radio were set properly as far as I can tell. To test I unplugged mic cord from rear port on radio an plugged into my PC and recorded on Audacity all performed perfectly,the cables were configured...

I was using my radio the other night and during a lull in the action I switched my mic. Bad move? When I went to transmit no audio .Switched back to original mic ,same result? Switched cables,reload data ,all I get through the radio is loud noise! I also requested RMA from Apache so I could return r...

Dear Scott, Stepped away from my "connectivity" problem for several days and thought about it. Protocol 2 worked good on linhpsdr but no goon Win 10 machine, re read Protocol 2 instructions and realized PowerSDR wasn't listed,loaded both SDRConsole and Thetis on Win 10 machine and all is g...

Dear Scott, Here's some more info.The radio connected with ho problem to my Linux box running linHPSDR, but
as you know the software isn't ready for prime time. I found another NIC which I will install in the Win 10 machine after
I return from dump. Thanks W1JAC

My Anan is direct connected to Computer and NIC is identified as Intel Gigabit by device manager,Thanks

Anam 8000 running factory Protocol 1 just the way it was shipped, flashed with HPSDR bootloader 2.0.4.4 .Everything seemed to go smoothly until I tried connecting to my computer ...no joy! Tried static IP, followed W1AEX walk through no luck,spent several frustrating hours,finally loaded Protocol 1 ...

Scott,Thank you very much for your settings which you kindly posted. Thanks to your examples I like my panadapter a lot better,large
learning curve coming from Flex-6500! Jack

Dear Scott and Rob thanks for the help,now an update! I moved the radio to a work area and I was looking at the rear of the unit and noticed
the bootloader switch was not off all the way.Cycled switch on and off,applied power and started software all is good! Jack

Thanks Scott and Rob for the timely response,coming over from Flex this is quite a learning curve.I was initially thrilled with the unit
and software but I'm a little disappointed in losing my NIC from an unrelated fuse failure,I hope this isn't a common occurrence! Jack

Dear Scott, Which Protocol programmer do I need,the radio is stock from the factory? Thanks Jack

Installed new 8000 ,connected through router to my Linux box (linHPSDR) very happy! Next I connected to PowerSDR (Win 10) direct connect no router, works great again!Played around a little no transmit just receiving, very pleased again! Then I started to manual calibrate unit ,got as far as 40 meter...

Thanks to WZ2Q for install walk through,I skipped the Win 10 portion and used Linux instructions on my Ubuntu machine,painless install! The only error was when linHPSDR was started and couldn't find my Anan,hopefully it will work when my new machine arrives. Thanks to all for your linHPSDR efforts. ...