Richie Now that I have all the issues taken care of I was having with the firmware. I'm seeing SEQ errors.. I did have it dedicated to a local NIC card but messing with getting the firmware fixed, I moved it over to the network. I recall this was the reason I moved it to the dedicated NIC. These err...

Midi ....Same problem here Nicholas. I will try and take a look at it today. Everything else seems to be fine except that midi window. Has this ever worked? Edit: ---- ok, after getting laptop RDP'ing to dev machine (which took a bloody age because laptop windows needed updating), and running Theti...

I use a MAC for my main computer and windows for my 8000DLE. Everything was working and all of a sudden after updating to the 2.6.9 A1, my MIDI controller will not work in a RDP session. I use RDP so I can easily use my 43 in monitor for my Mac and Thetis. This is what I get with the MIDI setup and ...

To whom it may apply Richie has been working very hard to help get some of the bugs out and to improve the interface. You need to be aware that with the verations from one system to the next (not to even mention the firmware versions) there's going to be some outcomes that may not fit into the norma...

Hi all, e2 is the end of this iteration and everything is with Doug so expect and update/release at some point. So with that in mind, let the games begin :D https://youtu.be/n3VKRheFfMs This is going to take a while...... loads and loads of the structure to change. Lets see how far along it is by t...

I agree, I have seen this alot in the past based on serial number. Try this one as I have seen this version be more stable with some 7000DLE's, Orion_MkII_Protocol_2_v2.0_pre1.rbf . If you need the firmware, send me an email and I'll send it to you.

ramdor wrote:

w2ner wrote:I got mine working again, I unchecked "wheel tunes outside spectral" and re enabled it. all good now.

ok that points to something, any idea how long this has been happening?

I think this started with D4 but I can't swear to it.

I got mine working again, I unchecked "wheel tunes outside spectral" and re enabled it. all good now.

Hi all, for your info - with the D6 version scrolling the qrg with the mousewheel won´t work in the panadapter when I before tried to scroll in the frequency window. Have now 4.1d and all o.k. 73, Helmut Which d6 version? and where are you using the mouse wheel? If you are just using mouse wheel in...

Do you know if auto drive works with the Acom 2000A?

Thanks Scott!!! That was it, with version 3.25 everything is working. Wow, thats too bad about not supporting legacy, sotra leaves some people out in the cold.

Thanks, I was using 3.27 and just removed it. Installing 3.25

One thing thats its doing now is, the Rec ant is coming on by default when I power it up. Even if I set it, save the profile it still comes up with the Rec antenna enabled on power up. need more info Nicholas. I can click it to change to tx ant and rx ant, and closing down brings it back in the sta...

I'm looking for information details on the setup of a Acom 2000a and my 8000DLE. I know its better to use the rs323 port on the rear of the 2000A., I have done that, made the cable and trying to get everything working. Anyone have a details on the setup in DDUTILS?

One thing thats its doing now is, the Rec ant is coming on by default when I power it up. Even if I set it, save the profile it still comes up with the Rec antenna enabled on power up.

Okay, well if you can fix that display freezing problem when panning, that would be great.

probably Nicholas. note: there is an issue I am tracking down atm, when typing in frequency into vfo box.... it does nothing :o :roll: :lol: Richie. typing a feq into mine works for what its worth errr odd, you using d5? I can type one in, but if i press enter it doesn't change. The issue is a bit ...

One thing I noticed and not sure if this can be changed or not. When you PAN the waterfall and pan adapter freezes until you stop panning. It would be great if this can be changed so the display is live during panning. probably Nicholas. note: there is an issue I am tracking down atm, when typing i...

One thing I noticed and not sure if this can be changed or not. When you PAN the waterfall and pan adapter freezes until you stop panning. It would be great if this can be changed so the display is live during panning.

I'm not a CW guy but I have played around with it the past few days. For what its worth Richie, I run a 8000DLE with a late serial number and I don't see this issue. Matter of fact it's been rock solid so far. I know NC3Z and NJ2US have been having problems with PS dropping and then coming back. Fro...

Richie

Get better, I know what stuff like that feels like, I fell off my roof a few years back. Take it easy and kick back.

Hi Richie Just a little something to put on your list. I have a Anan 8000 and I noticed the TX power meter was way off. All is fine when doing the adjustment but as soon as you go over the 100w adjustment, it will not adjust at all. No change. Its under PA settings / Watt Meter. This does not affect...

Tony EI7BMB wrote:Great idea

nico wrote: Is there a page we can crowdfund and donate to you?

Thanks

Nicholas

I agree

Thanks Riche for the updates. I'm sure I speak for everyone, wish you lived closer as we all need to take you out to the pub and live it up!!

SA3ATF wrote:Running c1 384KHz sample rate on 50" 4k 60Hz monitor 60fps currently showing around 7% CPU here on a newly built i9 9900K @5GHz.

50" monitor???? Holy crap.

For whats it worth scott

cLicari wrote:Running c1 full screen on 40" 4k monitor 60fps smoothly...
I did lose the blue panafall background though. Disable picDisplay is not selected.
Is c2 available for download?

[img]2.6.8%20c1.JPG[/img]

Great job Richie!

40 inch monitor, WOW

I'm seeing a utilization between 5 - 8% with 177 processes, 2164 threads and 78337 handles, so its running VERY VERY well...

I have a I7 3.5 gig CPU with 32 gig of ram.

WOW, that looks GREAT! I can't believe how far this has come with you Richie, been waiting for all this a long time. After the LONG list you have to go over, maybe a face list?

Thanks RIchie, you the man!!!

Guys, lets not make this a blog, lets keep this post clean and to the point so Richie can get information he needs to fix problems. Take anything else off line.