Search found 5540 matches

by w-u-2-o
Wed Mar 13, 2024 3:24 pm
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Implementation of Pure Signal by Dr. Pratt in other radio
Replies: 24
Views: 1270

Re: Implementation of Pure Signal by Dr. Pratt in other radio

It's still there. Look in the comments section of their latest post.
by w-u-2-o
Wed Mar 13, 2024 11:58 am
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Implementation of Pure Signal by Dr. Pratt in other radio
Replies: 24
Views: 1270

Re: Implementation of Pure Signal by Dr. Pratt in other radio

I put the question to Olliter on their Facebook page and they are definitely playing it cagey :|

https://www.facebook.com/Olliter
by w-u-2-o
Tue Mar 12, 2024 11:41 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: Microphone/ Audio Interface Options
Replies: 72
Views: 29925

Re: Microphone/ Audio Interface Options

WT4DX wrote:Is it feasible to run a TRS cable from the line output on a Presonus Quantum 2 directly into the XLR mic input of the G2.

Feasible, but you may need an attenuator.

Why not use cmASIO?
by w-u-2-o
Tue Mar 12, 2024 8:36 pm
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Implementation of Pure Signal by Dr. Pratt in other radio
Replies: 24
Views: 1270

Re: Implementation of Pure Signal by Dr. Pratt in other radio

It's clearly a fork of Thetis, if the web ad copy is to be believed.
by w-u-2-o
Tue Mar 12, 2024 10:34 am
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Implementation of Pure Signal by Dr. Pratt in other radio
Replies: 24
Views: 1270

Re: Implementation of Pure Signal by Dr. Pratt in other radio

It's more than that. First, remember that "the radio" is primarily contained in software element. The hardware element is little more than the front end and the first IF conversion. That means that any SDR that provides an appropriate feedback path and utilizes Thetis (or even PowerSDR mRX...
by w-u-2-o
Sat Mar 09, 2024 11:04 pm
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: VSPE, which is a good one to download
Replies: 2
Views: 223

Re: VSPE, which is a good one to download

If you are connecting a tuner (or any hardware device) to the PC using RS232 serial communications and want it to communicate with Thetis, no "VSPE" is necessary. Merely assign the correct COM port in Thetis (Setup > Serial/Network/Midi/CAT > Serial). If you need to make a connection betwe...
by w-u-2-o
Sat Mar 09, 2024 5:43 pm
Forum: Apache-specific Hardware Discussions
Topic: Is it worth upgrading from early 100D/200D rigs to latest Anan hardware?
Replies: 4
Views: 239

Re: Is it worth upgrading from early 100D/200D rigs to latest Anan hardware?

Some additional thoughts: The newer hardware has a more effective thermal design. If the hardware is run at 100W all the time that may or may not be something of interest. That said, on the older 100 and 200 series units, the simple expedient of getting a small fan to blow across the top of the chas...
by w-u-2-o
Sat Mar 09, 2024 3:34 pm
Forum: Apache-specific Hardware Discussions
Topic: Is it worth upgrading from early 100D/200D rigs to latest Anan hardware?
Replies: 4
Views: 239

Re: Is it worth upgrading from early 100D/200D rigs to latest Anan hardware?

Leaving aside the 14-bit receivers (10E, 100B), there's little practical difference between the original Hermes and the latest G2 hardware. Most of the improvements are only easily measurable on the test bench and are relatively invisible given real world conditions. Indeed, if you study the schemat...
by w-u-2-o
Thu Mar 07, 2024 12:56 pm
Forum: Amplifiers & Tuners
Topic: DU3500AL Auto-Tuner w/ Anan 7000DLE MKII and OM2000A+
Replies: 5
Views: 557

Re: DU3500AL Auto-Tuner w/ Anan 7000DLE MKII and OM2000A+

It's rare that we see a PC these days with anything but USB and Ethernet ports. The tuner provides an RS232 interface for communications. Thus an RS232 interface (aka "COM port") will need to be present on the Thetis PC. This means either adding an appropriate PCIE card (desktop PC) or a U...
by w-u-2-o
Thu Mar 07, 2024 12:04 pm
Forum: Amplifiers & Tuners
Topic: DU3500AL Auto-Tuner w/ Anan 7000DLE MKII and OM2000A+
Replies: 5
Views: 557

Re: DU3500AL Auto-Tuner w/ Anan 7000DLE MKII and OM2000A+

Disclaimer: I don't have any of that equipment... Looking at the manual for the DU3500AL it looks pretty straightforward. Page 16 shows the connections you need. The manual doesn't provide any detailed pinout information. Thetis supports Kenwood CAT protocol so you'll need to select that. You'll als...
by w-u-2-o
Thu Mar 07, 2024 1:48 am
Forum: G2 Operating System & Applications
Topic: G2 distorted audio using TRS and standard mic input
Replies: 76
Views: 8223

Re: G2 distorted audio using TRS and standard mic input

Perhaps a helpful point of clarification: gain is R8/R5 (assumes R5 always equals R4). As an example, the schematic shows R8 = 15000 and R5 = 1500. Therefore the gain is 15000/1500 = 10 (unitless). In decibels this is 20log(15000/1500) = 20dBV. It sure would be great if someone who is having a probl...
by w-u-2-o
Mon Mar 04, 2024 11:16 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Comparative Composite Noise Measurements - NC0B
Replies: 4
Views: 373

Re: Comparative Composite Noise Measurements - NC0B

Is it known whether PureSignal was used when the 7000 was tested?
by w-u-2-o
Mon Mar 04, 2024 11:12 pm
Forum: G2 Operating System & Applications
Topic: G2 distorted audio using TRS and standard mic input
Replies: 76
Views: 8223

Re: G2 distorted audio using TRS and standard mic input

This kind of variability in production units is crazy. Laurence's board has R8 per the schematic, you can see it in his photo. This is real quality problem.
by w-u-2-o
Mon Mar 04, 2024 7:54 pm
Forum: G2 Operating System & Applications
Topic: G2 distorted audio using TRS and standard mic input
Replies: 76
Views: 8223

Re: G2 distorted audio using TRS and standard mic input

I got permission from Abhi to publish the schematic of the Mic preamp board for the G2. Thank you Laurence! I also found that R8 was 10K on my board; that makes the gain lower than intended. I've increased it to 39K, which then means I have adequate gain from dynamic microphones without using "...
by w-u-2-o
Mon Mar 04, 2024 1:19 am
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Rack Mounting G2-1K5 Transceiver & ANAN 1K5 Amp
Replies: 2
Views: 194

Re: Rack Mounting G2-1K5 Transceiver & ANAN 1K5 Amp

As usual, with Apache there is no way to tell what reality will be until products start to arrive in the user's hands and people make actual measurements. It's easy to be quite skeptical of the measurements shown on the website: - The photos imply that both units are packaged in the same chassis, so...
by w-u-2-o
Sat Mar 02, 2024 12:30 pm
Forum: Digital ("Virtual") Audio
Topic: Major new version of Voicemeeter now in pre-release
Replies: 9
Views: 672

Re: Major new version of Voicemeeter now in pre-release

Scott, I have really been enjoying my Universal Audio Volt 1 interface. I have not tried using Voicemeeter with it yet. What would be the benefit of adding this version to my setup? James WD5GWY Voicemeeter is the go-to app if you want/need a virtual sound mixer on your system. As Tony mentions, fi...
by w-u-2-o
Fri Mar 01, 2024 11:46 am
Forum: Sales, Delivery, Warranty & Repair Discussions
Topic: NUC delivery update
Replies: 2
Views: 352

Re: NUC delivery update

It seems that Apache Labs people rarely, if ever, look at the forum, and even more rarely post anything.

Are you posting here because they are not answering your emails?
by w-u-2-o
Thu Feb 29, 2024 12:34 pm
Forum: Digital ("Virtual") Audio
Topic: Major new version of Voicemeeter now in pre-release
Replies: 9
Views: 672

Major new version of Voicemeeter now in pre-release

https://voicemeeter.com/voicemeeter-updates-february-2024/

The most exciting thing is that an ASIO hardware interface is no longer required to use Voicemeeter.

Also, for an extra charge, you can enable all of the hardware channels as additional virtual channels.
by w-u-2-o
Wed Feb 28, 2024 7:08 pm
Forum: Thetis
Topic: Thetis and display truncation
Replies: 7
Views: 821

Re: Thetis and display truncation

The minimum allowable size of a Thetis window is 1018 x 609 pixels. If your display cannot provide that much screen real estate then you are out of luck. James' idea is a good one to obtain more space but it appears that the 7" display you chose will still not meet the requirements since it is ...
by w-u-2-o
Wed Feb 28, 2024 2:31 pm
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: anan 200 d amp view
Replies: 11
Views: 843

Re: anan 200 d amp view

lauchlin wrote:I am running protocol 1

So many of us have gone to P2 that we've obviously forgotten that .4072 is the correct value for SetPk under P1 :)
by w-u-2-o
Wed Feb 28, 2024 12:37 am
Forum: Thetis
Topic: Auto Power on not working
Replies: 13
Views: 632

Re: Auto Power on not working

Labeling that button "Power" is one of the least comprehensible things in the history of PowerSDR/Thetis. I made a custom button for my skin that is labeled "Run" and "Stop", a much more accurate representation of the state of the software, and only the software. The bu...
by w-u-2-o
Sun Feb 25, 2024 9:14 pm
Forum: G2 Operating System & Applications
Topic: G2 distorted audio using TRS and standard mic input
Replies: 76
Views: 8223

Re: G2 distorted audio using TRS and standard mic input

What was the rationale for 20dB of gain? The CODEC IC already has piles of available gain. Why not 3dB or even 0dB (unity) gain?
by w-u-2-o
Sat Feb 24, 2024 11:27 pm
Forum: G2 Operating System & Applications
Topic: G2 distorted audio using TRS and standard mic input
Replies: 76
Views: 8223

Re: G2 distorted audio using TRS and standard mic input

As I posted, it is indeed a 5534. Gain is set to 10 (20dB voltage gain).
by w-u-2-o
Sat Feb 24, 2024 6:26 pm
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: anan 200 d amp view
Replies: 11
Views: 843

Re: anan 200 d amp view

@lauchlin -- are you running Protocol 1 firmware?
by w-u-2-o
Fri Feb 23, 2024 4:41 pm
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: anan 200 d amp view
Replies: 11
Views: 843

Re: anan 200 d amp view

There's nothing wrong with those results if you are using two-tone. As previously mentioned the dotted line is an artifact of the two-tone waveform. What power level was being used when you grabbed those screenshots? However, you may want to revisit your SetPk value. Make note of the current value, ...
by w-u-2-o
Fri Feb 23, 2024 12:20 pm
Forum: G2 Operating System & Applications
Topic: G2 distorted audio using TRS and standard mic input
Replies: 76
Views: 8223

Re: G2 distorted audio using TRS and standard mic input

Laurence: can we publish the schematic for the balanced mic preamp?

It might be helpful if someone who is having distorted audio problems could put an oscilloscope to work and see what was going on. Perhaps on some of these boards the NE5534 is going into oscillation.
by w-u-2-o
Tue Feb 20, 2024 7:15 pm
Forum: Thetis
Topic: Using MOX vs PTT different transmit eq
Replies: 10
Views: 761

Re: Using MOX vs PTT different transmit eq

That's a beautiful connector!
by w-u-2-o
Tue Feb 20, 2024 11:37 am
Forum: Thetis
Topic: Using MOX vs PTT different transmit eq
Replies: 10
Views: 761

Re: Using MOX vs PTT different transmit eq

Okay this seems to happen only with my electret mic. It seems that the audio is lower if I use the MOX button. But If I use my dynamic mic there is no difference in xmit audio level whether I use physical ptt or mox. Maybe something with bias voltage switching in. Assuming you mean "PTT switch...
by w-u-2-o
Mon Feb 19, 2024 6:07 pm
Forum: Thetis
Topic: Thetis full duplex ???
Replies: 7
Views: 463

Re: Thetis full duplex ???

You are using the second ADC for RX2, with a separate antenna?

Go to advanced search