Thank you Scott! Great news and lots to look forward to! 73, Rob W1AEX

Yeah, but Nick, here's the weird thing. After I jump start the 200D with Thetis v2.6.6 and then switch back to the folders holding Thetis v2.6.9, it starts right up with the very same database that was there when it wouldn't start up before. So... that kind of infers that there is nothing wrong with...

Hmmm... if resetting the database doesn't resolve it, and a clean install doesn't resolve it, what makes you think it's a database issue? The other part is that it only happens with versions 2.6.7 and later. Version 2.6.6 and earlier versions are never a problem. It's a weird one Nick! But... I do h...

Yeah Nick, I did that and more. What I discovered is that the usual list of fixes when things get wonky don't get it going again. The only thing that brings it back to life is running Thetis 2.6.6 (or any earlier version) for a few seconds and then I can run any later version that followed (2.6.7, 2...

LOL, thanks Gary. However, after all that, the startup issue came back to taunt me this morning. Very strange that jump starting it with Thetis version 2.6.6 always brings it right back to life and then v2.6.9 a8_1 will start up fine. There must be something different about the startup sequence that...

Just a note to mention that the random startup issue (roughly once every 4 startups) with my 200D (P2 FW v1.8) that plagued my use of Thetis since the release of version 2.6.7 seems to have gone away around the time that the 2.6.9 a6 release came out on 11/15/2019. The issue was: When Thetis was sta...

Hi Steven, Congratulations on grabbing the 7000DLE! To run SDR Console you will need to switch from the Protocol 1 firmware that runs PowerSDR mRX PS and flash to the Protocol 2 firmware that supports Thetis and SDR Console. The best place to start would be in the firmware section of this forum wher...

Thank you for the a8 patch Richie. My monitor maxes out at 60 fps but it's perfectly smooth and holds at the 60fps mark with RX1 + RX2 both running in Panafall mode. I never imagined that smooth operation with no stutters would be possible with that load! The re-sizable s-meter works fine and Thetis...

Thetis has been running smoothly with the 269_a6_2 patch since it came out and all morning today with the 269_a7 patch. I have seen the "Tune" anomaly now and then as described in the thread but it corrects for me as Jeff indicated by toggling PS off. Thanks Richie! Rob W1AEX (ANAN-200D wi...

What version of PowerSDR mRX is your friend running? Direct frequency entry was a problem with version 3.4.8 but it was quickly corrected with the follow-up release of the 3.4.9 version. I have not experienced this or heard of it being a problem with v3.4.9. 73, Rob W1AEX http://www.w1aex.com/archiv...

What software and version is he using? The problem you are describing was an issue with PowerSDR mRX PS version 3.4.8 and was corrected a few days later with version 3.4.9. I have not heard of it showing up in any subsequent versions. Post this in either the PowerSDR mRX or Thetis forum (depending o...

Had my first problem in a while this morning with A_51. I powered everything on. Went to the store, some back, and the panafall was frozen. But I could still hear RX audio. I did not try to transmit. I went to power the software down, and got an error message. I should have made a screenshot but I ...

Richie,

With a5_1 the PureSignal 2 logo is looking good!

Thanks!

Rob

The A5 patch looks good Richie. Thanks for including the YouTube resolutions in the screen size drop down menu. Very slick! I've tried Pure Signal with the amp off and the amp engaged and it's correcting fine (so far). I don't really know what the timer1_tick change does but it has worked flawlessly...

An old friend of mine bought an ANAN-100 back in 2014 right around when I bought mine. It has worked well for him directly connected to a second NIC on his computer (just a straight shot with an ethernet cable) on a separate subnet using the same 192.168.5.x static IP setup that I use. After 3 years...

Richie, As someone who makes skins for Thetis and OpenHPSDR mRX PS I love the Date/Time/CPU data being moved to the new status bar. Now I can move my Collins Emblem further down into that open field so it looks better. Also, nice touch displaying the size of the window. Makes it a snap for me to re-...

Hi Mark, Thetis stores all of its files into two folders which can be found at the paths shown below. It you clean out both of the Thetis folders, or rename them, then run the installation for Thetis it will be all brand new. The Wisdom file(s) are located in the Users path Thetis folder, so if you ...

Richie, I just installed and ran v268 e-1 and it works perfectly . I cycled through the bandstack numerous times, turned V-Synch and RX2 on and off several times and repeated the bandstack cycling test again a dozen times and it was flawless! Your coding "Kung Fu" is top shelf! Thanks for ...

Hi Richie, I exported my current database and then reset Thetis to install a fresh database. Running with the fresh database I ran the same frequencies that I used before and it came up with exactly the same repeating pattern of frequencies as in my earlier test. I'm really stumped now! Thanks for l...

NOTE: Just saw your video above. That is perfect and it's strange what Chas and I are seeing here. I'm stumped! Richie, Here is what happened with the following 5 frequencies in the bandstack: 1. 1802.8 CW 2. 1885 AM 3. 1930 LSB 4. 1960 LSB 5. 1993 LSB Starting at 1802.8 (CW) with RX2 enabled and V...

Roger that, will run the bandstack cycle at that rate and be back in a few minutes.

Hi Richie, I installed d6_2 and then checked the bandstack function with RX2 and VFO SYNCH enabled on 160 meters: Bandstack frequencies: 1802.800 (CW), 1885 (AM), 1930 (SSB), 1962 (SSB), 1993 (SSB) In the video below it cycles through the bandstack twice perfectly with VFO SYNCH disabled, but at aro...

Hi Richie and Rob, I just loaded D6_1 and thought the problem was solved with the band stacking jump in frequency with both receivers on and VFO Sync activated. However, if you make one of the band stacking frequencies a CW mode frequency, the problem is still there. For example, one of my frequenc...

Hi Rob, If you have a mo, could you try : https://www.dropbox.com/s/cg4yqonzcynkejv/Thetis_0318_011119_d6_1.zip?dl=0 Richie. (EDIT: MY MISTAKE... THE D6_1 RELEASE DID NOT FIX THE CW OFFSET ISSUE WHEN CYCLING THROUGH THE BANDSTACK.) Hi Richie, The d6_1 release fixes the strange bandstack problem nic...

Hi Richie, All frequencies are fine until I turn on RX2 and add the SYNC VFO button. I then notice that some of the band stacking frequencies change by 400 Hz down. This is the same frequency that I use for CW pitch or offset on my Anan. This frequency change only occurs when both receivers are on ...

Richie,

Thank you for fixing the data line issue on AM. It looks fine now with D5. So far, I have gathered zero errors in the SEQ log after running Thetis for 18 hours. It's all running smoothly here.

73,

Rob W1AEX

Richie, I'll echo Tony's report, the loading form messages are a nice touch and the nearly instant exit is great. I'll be very interested in the change to the PS auto-attenuate sampling interval. Perhaps the "as needed" approach will mitigate the tendency for PS to suddenly stop working he...

The ALC Group metering is a great idea! I love it and the scale is definitely easy to read at a glance while transmitting. Glad you put that idea out there Scott and beautiful implementation Richie! Hope you are on the mend Richie. I use my injuries to escape chores like washing the dishes and mowin...

DO2ZA Erwin wrote:Hi Rob,

have you tried 384k Samplerate?

73 Erwin

Hi Erwin,

Yes, the 384k sample rate does run very well. The 192k is just a matter of preference as it displays as much spectrum as I need to see.

Thetis v2.68 d1 with a 200D Rev 24 (blue face) firmware v1.8 running and sampling rate 192k. The Direct X option is enabled. My 200D is directly connected to an Intel NIC with a static assignment to its own subnet. No TX or RX audio dropouts are experienced. - PS does not function when the 200D is f...