Sorry to hear you were not well . Once again thanks for the great work.

Nice looking AMP Rob

Here is my 7000DLE Mk 2

Thanks Warren

I use CMD micro , pic on my QRZ page

Is the internal fan running Wes ?

Thanks for working on this Joe

Thanks to Warren and Scott for this reassuring info

That mercury Lux looks even nicer

Mark thanks for the screenshots. Using a Motu myself so this is very helpful

Could be an antenna analyser which uses RF perhaps . My Rig expert unit can do the same thing

I second that, more cores is better for our uses.

Great work Rick

Glad you got it fixed. I found a piece of broken cable tie when I opened mine up.

Thanks for the digram . Think I might try an external fan although there are posts for second internal fan on my 7000 mk2 . I replaced the original fan with a quieter unit with temp sensor so might use that type again for a second internal fan.

Check out Scotts excellent tutorial , you can skip straight to 8. http://wu2o.dyndns.org/wu2o_vac_tutorial_2.html I'm guessing you do not have virtual serial ports set up. If you are using JTDX you also have the options of TCI control (JTDX only) or TCP/IP cat control as Mike mentioned above. More i...

Checkout the motu m2 or m4 also https://motu.com/en-us/products/m-series/

I agree with Scott , a one or two port dedicated NIC is a great addition.

Very stable here. I've not had to reset since i installed the card.

I was able to do those settings beforehand Ruben,with the occasional run away maybe every few days

Just installed mine using USB C to USB C cable from MOTU M4 to new PC card and working fine so far. I am running 64 buffer size and manual buffer latencies of 10ms.

Have fun Richie

I think I want one Edit: ordered from Amazon, will update with any findings.

Thanks Scott. Just set this up on JTDX . Your screenshot made me realise there is now a specific entry for our radio. I've been using Kenwood TS2000 for years.

I'd strongly advise moving to windows 10 as any glitches you come across would be so much easier to fix. Did the same myself years ago and never regretted doing it.

A wild guess, is the "Network Throttle index tweak" checked on H/W select tab?

Ok. Perhaps then check the sound control settings in windows . Sometimes windows can change these during updates.

Are you using Voicemeeter software?

So far so good.

Testing JTDX 160 rc2 now with "split" enabled in JTDX

"changelog:

- TCI: attempt to fix some segfaults
- TCI: message handling improvement
- TCI: split fix"