You can e-mail me @ wa1oxt@yahoo.com.

Don't want to move off the subject here.

oxt

After a few more hours of Test & Measurement , I must say that both PC2 pre2 5550.rbf / Thetis 2.6.7 are stable with my 100D SDR Project. Optimizing the Resampler along with the aid of AmpView and the Rigol test equipment , I was able to tweak the bias on my amp for the best linearity and the le...

Few audio dropouts mentioned in my last post.
After reading Scott's suggestions regarding the Resampler.
Problem solved by tweaking the Resampler.

Tnx Scott.

Attached pix of results @ 67 dBm.

oxt

Eval: Thetis 2.6.7_PC2 _v12.1_pre2_5550.rbf Anan 100D SDR Project. Static IP addr from computer to Anan 100D.Project UR 22 audio sound device (USB interface) Audio via VAC -1 VMB (Voice Meeter Banana) set to 96kc/1024 VAC 1 set to 128/96kc DSP SSB (Filter/Buffer size) RX_TX set to 16384/1024 . Resul...

Thetis 2.6.7 .
Same Fatal Error on my 100D. SDR Project.

oxt

Installed PC2 ver 12.1 pre2.rbf.

No seq issues over the past 24hrs.
PS is stable and correcting .
Buffer size/Filter Size set to max.
No audio dropouts.


The fuse issue on this Anan 100D motherbd is not an issue as yet.

I will try the other rev 2morrow

oxt

Homebrew SDR Platform.
Anan 100d Motherbd feeding a 50vt. EB-104 SSA with Homebrew pair of 8877's

Stable output with SW ver 2.6.7 / FW ver 12.1.5171 @ +67dBm.

Results ....
PS.2 AmpView attached.
Main GUI attached.


oxt

SW ver 2.6.7 with FW ver 12.1 pre1.5171.

Anan 100d feeding 50vt. EB-104 300wt SSA

2x3cx1500's @ 67 DBM.


oxt

Homebrew SDR. Anan 100d Motherbd feeding 50vt. EB-104 300wt SSA @ approx 160 wts. FW results 1. SW ver 2.6.7/FW ver_12.1 pre1 .5070 results ...PS-2 stable , inband IMD . no seq issues. 2. SW ver 2.6.7/FW ver_12.1 pre1 .5171. results ...PS-2 stable , less inband IMD , Xmit noise floor lower no seq is...

Great job Scott.

My DJ console support.

oxt

Correction.. my hardware is a 100d motherboard feeding an EB-104 300 watt SS amp !

Sorry for the error.

oxt

Intel 980x, 6 core ,12 threads, Nvida Cuda. Anan 100D feeding a EB-104 300wt amp @ 50vts. power output @ 160 watts. Interesting ! Both work with PS. What is interesting is that the IMD of ver 12/5270.rbf ....PS is much better on the 5th , 7th , 9th and up. Ver 12/4070.rbf works also , but the IMD wi...

Anan 100D ,SW ver. 2.6.4 ,FW ver.11.7 works . Rx,Tx, and PS work great.

FW ver .11.8 failed , When power button pushed 100D would start but no Rx,Tx,display. Many LAN dropouts .
FW ver 11.9. Rx, Tx work , PS inop. PS erratic ,will not correct. No LAN dropouts.

oxt.