None of the things you are trying should matter and, as you can see, they don't matter (don't make any difference). When you changed ISPs, what equipment on your LAN changed? How do the radio and the PC get IP addresses? DHCP from your router? What does your LAN look like? Is it router<-->switch<-->...

Setup > General > Options > Options-1

If you have P2 and a proper IP address programmed into the 200D and it is working on 1 PC and not another, then the problem has to be with the PC. If you are using different cables with the two PCs it might also be a cable problem. Have you confirmed the problem PC works at GigE speed by connecting ...

Well, with luck Sigi's version will work.

So until that's resolved, I don't think I can do anything else! Of course you can do something, Laurence, don't be silly. You could take the existing 2.9.0.6, add the necessary changes, and publish it on your own Git repo. There are no "rules" preventing this. This is open source. And eve...

Great news!

How is the 200D getting that address? Is it coming from your router DHCP server? Or did you manually program it in with Bootloader or HPSDR Programmer?

What is the IP address of the 200D?

Upgrade to the latest software and firmware.

Thetis 2.9.0.6
Firmware 2.1.18

A better, more specific, link: https://github.com/ramdor/Thetis-2.9.0/releases/tag/v2.9.0.6

Unfortunately I will not be home enough until later this week to measure anything. Maybe Glenn would consider making the measurement?

When you suspect corruption of Windows it's best to use both SFC and DISM commands:

https://www.windowscentral.com/how-use- ... s-10-image

The reality is that everyone should run these commands at least once a month.

The easiest (but maybe not best or most desirable) way to use a 998 with a radio that does not have a compatible tuner interface is to put it in automatic mode and manually operate the amp operate/standby state as required. If you want fully automatic, closed-loop tuning, you will have to engineer a...

Not sure, John. I could measure mine but I won't have an opportunity to do that until later in the week. Perhaps someone else could make that measurement? If the amp was being used with a 7300 then it might have an internal mod to make it more compatible with the solid state, low current, low voltag...

I don't have an SB-230 so I'm not 100% sure of my interpretation, but... You may have damaged your 7000 by directly connecting the PTT output to the PTT input of the amp. It is probably not capable of keying that amp directly. The SB-230 is a typical amplifier design of that era. Such amp's used a -...

RAM size does not drive CPU loading unless the amount of RAM is very small and it starts to affect Windows OS performance. 8GB is sufficient in our case but 16GB is better overall for Windows IMHO. SSD size is not a factor at all. The 8000 was never offered with a built-in PC, only the 7000. My pers...

I have both the KPA500 and the KPA1500. I have used both with my 100D and 8000DLE. In both cases you make the usual PTT and RF connections between the amp and the Apache hardware. If you want PureSignal support, the built-in coupler output of the KPA1500 works well. The KPA500 will require a separat...

Other than it's prehistoric style LPT port for software control it's not really any different than any other two radio/four receiver mic/key/audio switchbox sold for SO2R op's. The Elecraft cable pictured will not work. However, it does provide a nice schematic to mark up with a red pencil based on ...

Are you running SSB or FM?

Do you have the DXD manual? Are there any questions about anything except J2 or J3?

Do you mean making cables? Because according to the manual the only software interface is between the DXD device and N1MM.

Do you already have Thetis interfaced to N1MM? Because I'm guessing that is also required, and for the 7610 as well.

That would be a Thetis Andromeda UI problem, or a problem with the Andromeda front panel.

There is no such thing as an ANAN-7000MKIII. Unfortunately this is what people are calling the latest production units of the 7000MKII because these units contain a new revision of the Orion board called the Orion MKIII, which is also an unfortunate and confusing naming choice. You can read more abo...

I have a friend with a new Andromeda his has a version 2.8.0.0 and at this point the radio useless . 1 When radio is keyed ( foot peddle ) there is a delay ? from the back ptt in 2 The audio has a reverb sound and and sound like its in am mode I have a 200 d so were using my setting to get close Yo...

While it would be convenient to gain control of an LPF via onboard digital IO signals, this is by no means a showstopper. There are plenty of serial CAT band decoder designs out there already that can be used to drive an LPF board in an automated fashion. Or, if you were thinking about the merely be...

This looks like a much better choice for an amplifier: https://www.ebay.com/itm/334454204211

Ryan, "Playing" is the operative word. I don't ever use linHPSDR, or piHPSDR for real. Where amateur radio is concerned the best tools are found on Windows. IMHO, those who eschew Windows are doing themselves a disservice. The same goes for Linux. I use both operating systems, Linux and Wi...

That is bad ass, Gary!

Does anyone make an amp to get the +4dBm output of the Duo up to say 37dBm (5W)?

Here's an embed of your video...

It's probably fair to say that the answer to that questions is "No."

John Melton's Git repo has seen almost no significant activity for a long time.

Did you see this topic: viewtopic.php?f=40&t=4155 ?