Stu, Apologies for not answering your questions. I believe as mentioned I've resolved the problem and believe, with lack of information, that I was the cause of the 'bad' audio first by not properly adjusting the TX audio and second by then jumping ahead and trying PS2. That stated as a response to ...

Stu, Thanks. Ok - first let me say I did the same thing to resolve this latest problem that I did for the CW sidetone problem and for the "DUP" display not working. I reset the DB! As someone that believes that should be absolutely one of the last things to try. That was it. I re-entered i...

unless someone has an immediate suggestion I'm done for a while... this is taking up too much of my time. NOW I can't get the TX audio to work right. Nothing changed since I last used it - but listening on another radio there is very weak crackling audio heard there. As I ask my customers: "wha...

Scott, This was an open set of questions for anyone here .... are you and I (and a few others) the only ones here? Really - I'm not a nube here... I DO know what I'm doing for the vast majority of it. I've had a Flex5000... I've had a Flex6700.... I am an accomplished EE and a HW/SW embedded designe...

DISPLAY DURING SSB TX And he has a sense of humor too boot! Bread in - broccoli out ... that's funny. ok - I'll start a separate thread for each question. I would say however it shouldn't/wouldn't divulge in to "Gary's Problems" if kept here - HOPEFULLY the title to THIS one is indeed spec...

Hopefully the "General Use" name on the top of this thread, as when I made that folder that was what I thought would be appropriate, is understood as - general use questions and not "a" question ... not sure Scott how we'd do that otherwise ... that might be a better place/reason...

this (above) was posted on the 11th with no replies... is there a better place for "wish list" type items?

regards,

Gary
K9RX

Scott, I have ... I need to go check ... ok - VAC1 is set to 2048 (buffer) and 48000 ... also not sure what it is but the buffer latency is set at 120mS. Note when I open up the control panel for Eugene's (not remembering the last name) VAC program it shows this cable as using "192000"1 Th...

and sure enough - go back and let LatencyMon run and within a few minutes it starts to rise ... it now says it is not suitable for audio and the values are above 3mS for the Highest Reported DPC and ISR. I guess I'll need to try to hunt down what is causing it - assuming it is one thing. It says the...

Gentleman, Forgive me but it seems this post has diverged here and there.... there are a number of posts showing what you all are getting individually - but the title here is "Benchmarks" .... so I ask : what are the benchmarks!? I had an Flex5000 at one time and their manual had values NO...

This is while using the 8000DLE on FT8, WSJT-X, VAC by Eugene.... not using PS When I transmit I have the normal 0 db ALC value. The display shows the tone and the rest of the signal in the passband is maybe 70 - 100 db down where you see the normal 'ripples' .... but occasionally, as the tone is sw...

Scott has provided the first info I have heard of that indeed there is I/O for it... I knew through looking at the schematic that there's AI's on the one header - I assume that is J16 (dont' have the - here it is - yes, J16) ... I remember looking at the unit already available... I remember there's ...

Scott,

That is indeed my current plan - just to have a bang-bang controller from the ALC (out of the amp) to the TX INH input.

g.

Re: ALC : No - I'm not misunderstanding - I just can't seem to get across what I'm talking about ... It has to be me - I don't understand why people always misinterpret what I'm saying! I have and had said specifically I am not looking for ANY actions of ALC to limit voice peaks or anything along th...

Thanks Scott, Ok .... for listening to my SSB signal - I'd still like to hear it with all adjustments in place. I want a strong DX signal as I have with my Yaesu ... that means processing. I know there are those that like high fidelity - that's not me (not that I want a poor signal of course). I get...

Ok ... I've finally used the rig to xmit (been testing receive through A/B comparison to an FTdx5000). Worked a G0 station on 20M JT65 using 1W .... and then a YU station on 40 CW using 1W as well ... question: 1) when using JT65 the waterfall turns bright white when xmitting - is there no way to st...

Continuing on with that thought .... -Please consider adding the ability to 'slice off' 3 bits of the 7 Outputs .... this would be to use 4 for an antenna switch and the other 3 for a FREQUENCY SEGMENT antenna switch. I know there is an option to slice it off to use for transverters so this would be...

Ok ... so I am continuing my quest for the 'better' radio ... have both the Anan 8000 and my Yaesu 5000 configured for WSJT/JT65 using WSJT-X. Two instances set up the same. The Yaesu is using the codec from the MicoHam Keyer II that it is connected to (use it for all connections/serial/audio). The ...

Scott, Its not an issue of whether or not I CAN do it ... I just thought since you've already done it it would be somewhat simple to do an export of the settings from PSDR/MIDI... if not I can indeed do it. Also there are obviously nuisances that aren't going to be gathered by trying it yourself - f...

Scott, Thanks for the reply .... the good news is this was a good day re getting more info. I found through reading various things scattered around docs on midi originally done in April of last year on the file system of the Yahoo forum. I had not been there as yet (nor seen references to it until I...

Scott, Is there some way for you (and thus others) to also show/provide the MIDI settings from within PSDR for your template? Obviously having the template, although it saves a great deal in not having to use the editor or at least reducing the 'base' planning, doesn't satisfy the needs of MIDI/PSDR...

SUPER! I was hoping someone had a template to start with!! It is indeed quite tedious work using the editor. I plan on using a proper DJ panel with a jog wheel for the VFO's and the more commonly exercised functions like VOL, AGC, A<B, SPLIT etc ... but the less often used ones on the tablet like ba...

Ok - never mind ... at least for the "can't get it to run again" part ... my dumb mistake. I KNOW you can't just drag an app to the desk top - but i did that anyway. I saw the "exe" and assumed, obviously incorrectly, that it was self-contained ... I'm talking about Touch-Bridge....

Scott, Ok ... thanks for the follow-up on the TOUCH-Bridge. So I installed it - and everything worked. I ran the app on my tablet (Android) ... I pulled up a default template.... on PowerSDR (using the latest with 8000DLE) I went to CAT and then MIDI and it seemed to find it ok. I could see if I tap...