Both the blue and black face versions have 3.5mm jacks and the RJ45 is on the front panel. It's been this way on all ANAN models since the ANAN-10 with the exception of the 7000 and 8000 units built with the giant, silver face chassis. The reason they have all been built this way is because all of t...

What happens if CTUN is activated?

You can use ASIO to make a connection between Thetis and Voicemeeter, and between Voicemeeter and the Behringer, thereby significantly reducing latency for phone operations. Your approach of using the Behringer to get ASIO running properly in Voicemeeter is 100% correct. Selecting identical Voicemee...

The RX passband and TX freq appear to be exactly 6KHz apart. What am I missing?

Annan 7000DLE MK2... Black. pre AKA MK3. OrionMK2. Protocol 2. (v.3.9). firmware 2.1.18. Thetis v2.9.0.6x64 Where does the signal from the sampler go back into the radio ? External coupler signals are accepted at the Bypass input connector. There is also talk about activation of the automatic att. ...

As already written above, the long answer is here: viewtopic.php?f=20&t=2384

This isn't comparing apples to apples necessarily, but when I two-tone and look at the Panadapter during the calibration I see something I'd not seen before (it could well be that I did see this also before, but didn't pay attention to it and attribute what I see to the Alpha :lol: ). Also, the ski...

IIRC, there are many, many more places in the database than those that are touched by the calibration routine.

Mundane as it might seem but the config dialogs really need cleaning up if only to help out new users. By which I mean disabling controls that are inoperable in particular modes. For example it is not clear which audio controls work with VAC and to turn on by default sane PTT settings. Oh and why n...

Why did you give up the RF2K for the Alpha?

There's probably not anything to worry about. I have one of the original, prototype Xtronic couplers that Dave was making before he went into the real business of making them commercially. At the time he said they were good for 1500W key down all day long. The 3000W PEP rating supports this assertio...

I can't speak for Richie, but I'm always ecstatic when anyone adds to the codebase. It would be a shame if this issue had any sort of chilling effect on potential contributions by anyone

Configuration management and version control are great and useful topics, and very important in the world of software. To that end discussion on these topics is good and useful. But please let's all try to keep it professional and not personal. The open source development environment can range from ...

Exactly, Chris. Legacy command left over from the origins of PowerSDR as used with the old Flex hardware. There is some evidence that this command might return some information on attenuator (not step attenuator) settings, but the 7000 and 8000 don't have the 10 and 20dB attenuator hardware and it r...

Using the built-in CAT test facility of 2.9.0.6, I get back nothing from any version of this command except ZZPA; which returns ZZPA1; I believe this command is a leftover from when the original version of PowerSDR was used with the legacy Flex radios (1000, 1500, 3000, 5000). I do not believe it ha...

Hi Scott, I have tried to connect it to a 10" HDMI monitor, but no luck getting any display. The adaptor works with a USB stick. 73 de va7qi, ....Erik. Thanks, Erik. I suppose that shouldn't really be a problem since people who buy an Andromeda want the look and feel of a "normal" ra...

PLEASE don't use the report button again unless there is a real problem on the forum. I see you've realized that mistake already. When you make that mistake it really riles up all the moderators!

Yes, Bootloader will load any firmware, P1 or P2. IMHO, it is the best approach to loading firmware.

If there are no glitches on the audio then you can safely ignore them.

If there are glitches on the audio and you have tried all versions with no success then you have a "lemon" Orion MKII board that can't run P2.

P.S. please don't post duplicate questions in multiple topics.

It appears I can't duplicate the problem because it does not occur when carrying over a preexisting calibration like I am.

On my ANAN 7000DLE MKII (latest serial number) works great but it looses the calibration and reverts to default as soon as the Thetis v2.9.0.6 x64 (4/23/22) is closed. By default Thetis reports about 7dBm in excess, (a calibrated -73 turns into -66 dBm.). I have to run the calibration routine every...

Then your problem is probably that your specific Orion MKII in your 7000 does not close timing properly with 2.1.18. Try a different/earlier version of P2 firmware (links in the first post of the firmware topic where you got 2.1.18). I have started a new topic for your particular firmware problems. ...

After the update ANAN 7000 MKII With P2 2.1.18 , I noticed that it sometimes freezes during reception and transmission audio. You have one of three problems: 1. Your CPU is not fast enough for P2--solution: faster CPU, or lower IF sample rate. 2. Your network is not fast enough for P2--solution: de...

Based on the content of those videos it appears that you would have to contact Laurence directly to determine the availability of PCBs, schematics, BOMs, Gerbers and other design information. I don't know if he is ready to make such information or material available generally.

There is no evidence this is going to be an Apache product at this time. Therefore this topic will be moved out of the "Apache-specific" sub-forum to a more appropriate place. This project is Yet Another Orion Board with a highly integrated, onboard Raspberry Pi 4 compute module. It is wel...

I just need to locate a web page from which I can download the "Alpha Remote (AR) AR9500 PC application software as the amp didn't come with a CD. If I understand correctly the original owner didn't operate the amp from a PC. Your Google-Fu must really be failing you. Googling "alpha 9500...

Not according to this thread:

viewtopic.php?f=20&t=2398

If this is the right kit it's more than you need but it's only $10:

https://www.amazon.com/GeeBat-460pcs-Connector-Housing-Adapter/dp/B01MCZE2HM

I am using TCP. Are both Thetis and N1MM running on the laptop together? Check to make sure there are no Windows firewall rules impeding operation (compare the laptop to the other Windows machines). Please post screen shots of your N1MM and Thetis setup pages so we can see if there are any errors i...

I have N1MM connected to my ANAN-7000DLE MKII using Thetis 2.9.06 on my win 10 desktop and my win11 laptop, but i have not been able to connect using my win 10 laptop. As far as I know, I have N1MM and windows configured like my win 10 desktop. Any suggestions? Tom W0IVJ Did you remember to install...

I simply do not agree... Then you are flat wrong, simple as that. The onus has ALWAYS been on the digi-mode software developers to make their software work with the radio, not the other way around. The reason for this is because Sun, Kenwood, Yaesu, Flex, Elecraft, and openHPSDR (Thetis) will each ...