Search found 1468 matches

by ramdor
Fri Jan 06, 2023 2:25 pm
Forum: Thetis
Topic: ZZPA Cat Command
Replies: 9
Views: 1379

Re: ZZPA Cat Command

double click on S-ATT label on the front end, or under settings->general->options, ANAN step attenuator, uncheck
by ramdor
Fri Jan 06, 2023 9:51 am
Forum: Thetis
Topic: Thetis 2.9.0.7 x86 (4/23/22) MW0LGE pre-release (meters testing)
Replies: 95
Views: 20598

Re: Thetis 2.9.0.7 x86 (4/23/22) MW0LGE pre-release (meters testing)

Hi Is it possible to repeat this test. Thank you. https://drive.google.com/file/d/1GPtbPX5EsyI4L1BWp6ohexH7duAA2ThD/view?usp=sharing hi Yevgeni, thanks for vid. There were aspects to the rx2 offset calculations that I hadn't implemented in the new meter work in progress. I had only intended github ...
by ramdor
Fri Jan 06, 2023 9:03 am
Forum: Thetis
Topic: ZZPA Cat Command
Replies: 9
Views: 1379

Re: ZZPA Cat Command

ZZPA; sets the current regular ATT mode, not the S-ATT, but will return value for a S-att radio if using the dropdown box to set the ATT (return values 7-9) Values (set) : 0 : off 1 : on 2 : -10dB 3 : -20dB 4 : -30dB 5 : -40dB 6: -50dB Values (read) : 0 : off 1 : on 2 : -10dB 3 : -20dB 4 : -30dB 5 :...
by ramdor
Tue Jan 03, 2023 2:16 pm
Forum: Thetis
Topic: All the 2.9.0.6 issues
Replies: 17
Views: 3526

Re: All the 2.9.0.6 issues

Richie, Forgive me for asking: you added a new section just an hour ago "Enhancements" I believe it is called.... did you want me/us to add to this directly or as someone has done - add "NEW ISSUE"? I don't want to clobber what you have if you meant it to be BY you... Gary if it...
by ramdor
Tue Jan 03, 2023 2:20 am
Forum: Thetis
Topic: All the 2.9.0.6 issues
Replies: 17
Views: 3526

All the 2.9.0.6 issues

Hey folks, Hope you all had a good Christmas & New Year. Please could you list all 2.9.0.6 issues over on github (https://github.com/ramdor/Thetis-2.9.0/issues). Try to check to see if the issue is already reported. If you have problems with github just list it here. I am looking to spend some t...
by ramdor
Wed Aug 03, 2022 1:52 pm
Forum: Amplifiers & Tuners
Topic: TCI with RF Kits RF2K amplifier
Replies: 61
Views: 41648

Re: TCI with RF Kits RF2K amplifier

ok, a couple of reports to say it now works. It seems that the RF_Kit amps require split_enable to be sent to them before they will do anything. Ideally the amp would query for this, because sending it on connection is not part of the TCI spec. Hi Richie! Enormously important work that you do. 8-) ...
by ramdor
Wed Aug 03, 2022 1:48 pm
Forum: Thetis
Topic: Fatal error message, bricked.
Replies: 20
Views: 3978

Re: Fatal error message, bricked.

check in database.xml that the following is set, and that there is only one entry for clrbtnVFOBackground

<Options>
<Key>clrbtnVFOBackground</Key>
<Value>0.0.0.255</Value>
</Options>
by ramdor
Sat Jul 09, 2022 3:07 pm
Forum: Thetis
Topic: Splash disable?
Replies: 16
Views: 3185

Re: Splash disable?

A shame that these forums host a link to a build like that. I guess some are entitled today, so much so, that either ignoring or single clicking is just too way too much of an afront to one's freedoms or too much effort. Ah well. Anyway, just to mention, there are a couple of issues with 2.9.0.6 tha...
by ramdor
Tue Jun 28, 2022 11:53 am
Forum: Thetis
Topic: Quick situation update
Replies: 20
Views: 4777

Re: Quick situation update

Quick question, is that a 2-meter antenna on your bike? yep Mark, running aprs from a Yaesu FT1DR. The antenna is just a cheapy 2/70 with a spring at the base so I can 'get my leg over'. Strap to the frame of the bike and the vna shows an swr of 1.03:1 at 145.2MHz, seems to work great. Amazingly th...
by ramdor
Tue Jun 28, 2022 8:45 am
Forum: Thetis
Topic: Quick situation update
Replies: 20
Views: 4777

Quick situation update

Hey all, I thought I would post a quick message with a situation update. Everything is ok here personally, but I have taken the decision to spend summer doing 'summery' things and getting some much-needed exercise and fresh air. To that end my Thetis dev/tinkering work has completely stopped, I have...
by ramdor
Fri May 06, 2022 3:12 pm
Forum: Thetis
Topic: Thetis v2.9.0 - Updates and Issues
Replies: 431
Views: 109224

Re: Thetis v2.9.0 - Updates and Issues

Hey all,

Currently working on docking....

Quick vid : https://youtu.be/jW-NcWgKVDo

73
by ramdor
Fri May 06, 2022 2:01 pm
Forum: Thetis
Topic: Can't import a previously saved data base
Replies: 8
Views: 2423

Re: Can't import a previously saved data base

your DB imported fine here....

Watch : https://youtu.be/9bb2PduJndk
by ramdor
Fri May 06, 2022 11:41 am
Forum: Thetis
Topic: Can't import a previously saved data base
Replies: 8
Views: 2423

Re: Can't import a previously saved data base

you will either see 'imported successfully' or 'could not be imported' You will get one or the other, it is impossible not to get one of those as you can see from the code. I changed the code to always TOPMOST the message box in-case it was behind something which will be in the next release at some ...
by ramdor
Fri May 06, 2022 10:11 am
Forum: Thetis
Topic: Can't adjust TX bandwidth using mouse
Replies: 15
Views: 3674

Re: Can't adjust TX bandwidth using mouse

yeah it is totally broken atm. I will look at it at some point.
by ramdor
Thu May 05, 2022 8:13 pm
Forum: Thetis
Topic: Thetis v2.9.0 - Updates and Issues
Replies: 431
Views: 109224

Re: Thetis v2.9.0 - Updates and Issues

Hi Richie, These meters look really great and look forward to seeing and using them... Could I add one point could the scale range go to 200w for us 8000 guys. cheers M0CPY /Andy yes, power limit per radio model needs to be implemented yet. If a meter uses an image, it will look for _100 _200 _25 e...
by ramdor
Thu May 05, 2022 3:06 pm
Forum: Thetis
Topic: Thetis v2.9.0 - Updates and Issues
Replies: 431
Views: 109224

Re: Thetis v2.9.0 - Updates and Issues

The new meters looking terrific. Thank you guys. Can we expect other scales and a swr-meter in its own window? meters.jpg and on my 7" monitor as well. mimo.jpg on the kenwood look-a-like, when tx'ing click the meter area to cycle the data in use. btw, in RX they are only displaying SIG_AVG atm.
by ramdor
Thu May 05, 2022 2:54 pm
Forum: Thetis
Topic: Thetis v2.9.0 - Updates and Issues
Replies: 431
Views: 109224

Re: Thetis v2.9.0 - Updates and Issues

DG9FDA wrote:Starting Thetis 2.9.06 this morning coming up with the following fatal error:

Screenshot 2022-05-05 105018.png

What can I do? What is the problem?
Thanks a lot!
73 Georg, DG9FDA


please send me the database that is causing this
by ramdor
Thu May 05, 2022 2:04 am
Forum: Thetis
Topic: Thetis v2.9.0 - Updates and Issues
Replies: 431
Views: 109224

Re: Thetis v2.9.0 - Updates and Issues amp selecton issue

Hi all, first Homage to Ritchie and co, wow you guys blow me away. I run mixed barefoot and amp and have my external feedback organised nicely etc. Problem is when I run my amp the rig output is scaled down to 25 watts max. so I really need twosets of PA scaling options. (I really don't want to blo...
by ramdor
Wed May 04, 2022 11:16 am
Forum: Thetis
Topic: Thetis v2.9.0 - Updates and Issues
Replies: 431
Views: 109224

Re: Thetis v2.9.0 - Updates and Issues

w-u-2-o wrote:That's very pretty, Richie. Is the next step a bar graph style multimeter?


yeah, next on the list to sort out. Fun times implementing all those dynamic scales in directX :(
by ramdor
Wed May 04, 2022 3:14 am
Forum: Thetis
Topic: Thetis v2.9.0 - Updates and Issues
Replies: 431
Views: 109224

Re: Thetis v2.9.0 - Updates and Issues

A quick vid showing some progress.

https://youtu.be/EUUl0xpju8o

73
by ramdor
Wed May 04, 2022 12:23 am
Forum: Thetis
Topic: Can't import a previously saved data base
Replies: 8
Views: 2423

Re: Can't import a previously saved data base

so you do not see in a popup window? Database Imported Successfully. Thetis will now close. Please RE-START. or Database could not be imported. Previous database has been kept. If not, the popup might be appearing behind setup window, or on another screen? Can you click setup or thetis when this hap...
by ramdor
Mon May 02, 2022 11:15 pm
Forum: Thetis
Topic: Thetis v2.9.0 - Updates and Issues
Replies: 431
Views: 109224

Re: Thetis v2.9.0 - Updates and Issues

Hey all, Well, a day of sorting out data to image calibration, so I just had to implement a cross needle meter. The images are thanks to Ernst, OE3IDE. Building all these different meters irons out issues and tests the implementation. They will all come as part of an update sometime down the line. L...
by ramdor
Mon May 02, 2022 5:43 pm
Forum: Thetis
Topic: Frequency changes with resolution adjustments after transmit
Replies: 3
Views: 1239

Re: Frequency changes with resolution adjustments after transmit

I think it is perhaps related to the pan setting that you have in RX.
by ramdor
Mon May 02, 2022 5:32 pm
Forum: Thetis
Topic: Frequency changes with resolution adjustments after transmit
Replies: 3
Views: 1239

Re: Frequency changes with resolution adjustments after transmit

Seems like the frequency change happens when you hit X1 whilst in TX @ 24 seconds into the video. Not sure why it would jump off to the left like that, very odd. Can't replicate it here in either DUP on or off. Will add it to the list of issues on github.
by ramdor
Mon May 02, 2022 3:57 pm
Forum: Thetis
Topic: Thetis v2.9.0 - Updates and Issues
Replies: 431
Views: 109224

Re: Thetis v2.9.0 - Updates and Issues

It will effect anyone that has recently run a level calibration. Well, since 2.9.0.6. I will need to get a 2.9.0.7 build out to fix it, sometime over next couple of days. Unfortunately, it will require a re-run of level calibration.
by ramdor
Mon May 02, 2022 3:50 pm
Forum: Thetis
Topic: Thetis v2.9.0 - Updates and Issues
Replies: 431
Views: 109224

Re: Thetis v2.9.0 - Updates and Issues

ok, found the issue. Will PM you with link to exe Sigi.

Thanks for report, the vids helped.
by ramdor
Mon May 02, 2022 3:33 pm
Forum: Thetis
Topic: Thetis v2.9.0 - Updates and Issues
Replies: 431
Views: 109224

Re: Thetis v2.9.0 - Updates and Issues

I could not find any issue with signal level calibration into a fresh db. I have installed the TAPR version and there the signal level calibration is saved without a problem. I start both versions via the datapath command. Started both versions with fresh database. I'm kind of stuck. Any advice? Ma...
by ramdor
Mon May 02, 2022 10:54 am
Forum: Thetis
Topic: Can not see entire Thetis screen on my Notebook
Replies: 10
Views: 2551

Re: Can not see entire Thetis screen on my Notebook

I had a quick look into this....

Vid: https://youtu.be/FLWEvjkwWbI

73
by ramdor
Mon May 02, 2022 8:58 am
Forum: Thetis
Topic: Can't adjust TX bandwidth using mouse
Replies: 15
Views: 3674

Re: Can't adjust TX bandwidth using mouse

There is no interactive adjustment of the TX transmit bandwidth in the spectrum when in receive. It can only be done using the up/down number controls on the main gui (just above the TX FL button), or in setup in the Transmit tab (Transmit filter). It can be adjusted with the mouse in the spectrum w...
by ramdor
Mon May 02, 2022 8:39 am
Forum: Thetis
Topic: Thetis v2.9.0 - Updates and Issues
Replies: 431
Views: 109224

Re: Thetis v2.9.0 - Updates and Issues

Is there a problem with saving level calibration values? I just started with an empty database and did a level calibration. After restarting Thetis, the calibrated value is gone. Calibrated again, restarted, calibrated value disappeared again. There is an issue with PA level calibrations for the ba...

Go to advanced search