I have a most likely different foundation in time (as usual in my case; :lol: ) I think I hear a faint "metallic" sound just when I'm modulating, and have tested everything possible, but this fact is still true. I thought that it came with me when I used the noisegate in PowerSDR, so I did...

I can also take care to tell you that today I got my new Wavenode probe with RF View so I can measure my Acom 1500.
Just in this moment, it is about solving cable between the probe and the radio.
Tells later how it works.

73

I know that this Presonus 192 Mobile is very good soundcard and popular with musicians on the go! What I wonder is if you do Scott with the other ports available on this sound card? I'm looking around for what's replacing my M-Audio M2X2M and I think that after a certain money limit, it's the number...

Who wants 3 bands when there are 10

Sold inside Sweden!

Hello everyone and good continuation of the new year! I have decided to sell my PiHPSDR when I unfortunately never use it. It is of course in 100% both condition and function! Be sure to save money and buy this if you are interested in one. Sends around the world at your own expense. The price is 40...

Because it worked with my 200D with metis. ,,,, rbf I would think it works with the same in your case.
Otherwise, I certainly believe someone else in this eminent forum may seem to share two opinions.

Anyway good luck Justin!

Here is a new picture from the SA3ATF studio and the soundcard is in the front of the right speaker.

Behind the computer, it's a 1,5kw Dummy load if you're wondering what's in the bag. They are not tight as you may know ....

Congratulations on your new sound card and especially to ZERO delay!! Always good to hear about others sucsess I have to say :D I'm running with a sound card called M-Audio M-Track 2X2X4 which also has USB C, but I do not really know. It's then delayed, even if I listen to another recipient when I s...

Have not had time to look more at this but think there's something else I missed because I can not record TX audio neither in quick recording nor under wave. On the other hand, it works as it should record RX audio. Hope it will be calmer during the middle days so I can take a closer look at this. W...

Thank you so much for the answer! I probably (most likely) is stupid, but I can not work it unfortunately :roll: Seeing that WMB gets signal according to the meters in it, but I can not get the signal to the radio. Have been sitting for too long with this, so I'll take a new look and try again to th...

viewtopic.php?f=17&t=2411

73's
Tommy, sa3atf

Yes, I have read I can promise you.
There must be something i miss, but will sit down when I have time and go through everything again and let's hope I come up with something good.

Hello to all of you! I'm trying to get started with digital modes om my Anan 200D, but having trouble making it work satisfactorily. VAC1 I have dedicated to phone where I drive ASIO and my sound card so I would like to have digital setup on VAC2. Do not work as I want. The closest I've come is to W...

Good information!
I'm also going on with this so I thank and bug and return if I get stuck.

73
Tommy, sa3atf

I have my setting on 125% scaling and think it works well on my big 4k monitor.

73
Tommy, sa3atf

Is there no one who can give my dear friend Peter tips on what might be wrong with his 100D?
We think it's unfortunately about the radio to do ...

Woo hoo, the radio is now within Sweden's borders
Just hope the mail will deliver as they should now

Thank you very much for the reply Scott! That sounds safe when I wrote the manual at work tonight, However, I have never had to drive the PR40 in the high boost mode, even though I know it's low output level from that microphone. I guess it will be a bit of a trail and error before these pieces work...

Aboute the attenuator on RX2, do you think I should order one from for example DXEngineering, or do you have other suggestions? It will be expensive for me to order from there with currency exchange and VAT, but is it the best option so what? What about the Pure Signal coupler is the best solution? ...

Thanks for the tip!

I ordered a CAT7 flat cable only for a few days ago to have my 200D here at home.
Fun with this" in real life tips", also than just more advanced things!

Thanks and best 73's
SA3ATF, Tommy in Sollefteå - Sweden

Come on thinking of one thing, I'm used to PTT the Flex and Acom amplifier using a foot switch. Then guess that I'm going to plug in the back ACC jack to make it work like I'm used to? PTT to the amplifier can I drive from the radio and the RCA jack to my Acom when I see a PTT out of 200D ?? Just wa...

https://imgur.com/a/W84ux Here's a recently picture from my shack. Do not know if I did right when I uploaded the image.... There you can see the computer standing on the floor under the table. Planning a whole new version now, since I rarely have the same set up more than maybe two months and see i...

Of course I will have my main computer for Anan radio in first place. It is packed with Intel Core i7 7820X 3.6 GHz processor, Samsung 850 EVO PRO 512GB disk, Corsair 16GB (2x8GB) DDR4 2666MHz CL16 Vengeance x 2 ram and MSI GeForce GTX 1060 6GB Gaming X for the graphics and its all mounted in a Cors...

Hello guys! Now it's on the way a 200D Rev 24 and piHPSDR home to me and they'll should show up next week! Have I said I'm looking forward to it ? :lol: Too bad I'm working next weekend, I'm very likely to be extremely tired on the job :D Have at least run a bit with my new Acom 1500 amplifier and i...

Absolutely, completely agree with you!
In addition, everything feels so simple and of course I'm used to PowerSDR from my old Flex.

Yes, as you hear, I'm already very impressed by these wonderful rigs!

73's
Tommy, sa3atf

Hello guys! At the end of the week we decided that I would greet my friend sm4pel to have a nice chat and play with his 100D. I have now spun an Anan 100D and am completely blessed! Just talked to a station from Germany in 80m who ask if I drove on a sdr rig with pure signal because he thought my si...

Just found the answer about the coupler on the Wavenod website :oops: "WaveNode sensor RFView ports are optimized for Anan SDR IMPure operation. The ouput is set for -3 dbm @100 watts forward power. This level will not to exceed the recommended input level of +13 dbm @ 1500 watts forward power....

Thank you very much Scott for very comprehensive answers! Perhaps it may be worth paying a little more for the Rev24 model then? As for the PureSignal coupler, I wonder if it works with one from Wavenode? Here is a link: http://www.wavenode.com/index.htm#RFView I have many of their products and it w...

What is the greatest difference between the different boards, like Rev 16 and Rev 24? Have obviously read this on the forum, but as I said before, it's easier to get it explained by you as know. Has been offered two 200D and it seems to be one earlier and one later. It's close now :D 73´s - Tommy sa...