Search found 175 matches

by n1gp
Mon Dec 04, 2023 7:28 pm
Forum: piHPSDR
Topic: Protocols
Replies: 2
Views: 6919

Re: Protocols

I believe you are referring to PiHPSDR at start-up.

The ANAN-G2 does not currently support Protocol 1, so you can
'untick' that in the PiHPSDR start-up dialog as it can be ignored.
by n1gp
Wed Nov 08, 2023 10:43 am
Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
Topic: How to tell what FPGA thus firmware goes on Orion MK-III board
Replies: 8
Views: 8962

Re: How to tell what FPGA thus firmware goes on Orion MK-III board

Jim, Just to confirm, you installed v2.1.26 of the firmware and v2.10.3.3 of Thetis? There is a protocol 2 firmware newer than v2.1.26, that would be v2.1.27G: https://community.apache-labs.com/download/file.php?id=3477 You could also try using the latest (only) protocol 1 firmware for that board to...
by n1gp
Tue Nov 07, 2023 5:48 pm
Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
Topic: How to tell what FPGA thus firmware goes on Orion MK-III board
Replies: 8
Views: 8962

Re: How to tell what FPGA thus firmware goes on Orion MK-III board

Jim,

You might want to install the Latest Thetis and maybe do a database reset.
https://github.com/ramdor/Thetis/releases/tag/v2.10.3.3

You should definitely use Radio Model ANAN-7000DLE not ANAN-G2.
by n1gp
Tue Nov 07, 2023 3:12 pm
Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
Topic: How to tell what FPGA thus firmware goes on Orion MK-III board
Replies: 8
Views: 8962

Re: How to tell what FPGA thus firmware goes on Orion MK-III board

Hi Jim, If your current firmware is 2.1.26, I would say that is a EP4CE115F29C8N Cyclone IV series FPGA. That is the latest Protocol 2 firmware for that board although I had posted some older ones in this thread: https://community.apache-labs.com/viewtopic.php?f=32&t=4292 UPDATE: I see Scott bea...
by n1gp
Wed Nov 01, 2023 6:38 pm
Forum: G2 Operating System & Applications
Topic: New G2 with display and problems
Replies: 30
Views: 23738

Re: New G2 with display and problems

Hi Roger,

From what I have heard the XLR input has more amplification than the mic
input. You should turn that down from 50 to something under 30.

When you change from XLR to front or rear mic input you also need to change
the setting in pihpsdr:

mic.png
mic.png (60.78 KiB) Viewed 23349 times

xlr.png
xlr.png (61.43 KiB) Viewed 23349 times


-Rick / N1GP
by n1gp
Fri Oct 27, 2023 11:18 pm
Forum: Apache-specific Hardware Discussions
Topic: Angelia board : where's J40
Replies: 2
Views: 2143

Re: Angelia board : where's J40

Hi Marc,

I was just looking at the schematic and some pictures I found on the net.

This looks like J40 to me (on the board):

angelia_clk.png
angelia_clk.png (333.9 KiB) Viewed 2125 times
by n1gp
Sun Oct 22, 2023 12:41 am
Forum: Hermes Firmware (10 & 100)
Topic: Recovering an ANAN-10
Replies: 20
Views: 29805

Re: Recovering an ANAN-10

Hi Kurt,

I would like to do some forensics on it. Maybe I could revive it.

-Rick / N1GP
by n1gp
Sat Oct 21, 2023 11:30 am
Forum: piHPSDR
Topic: G2 PiHPSDR NOTICE
Replies: 1
Views: 5484

G2 PiHPSDR NOTICE

(This is a re-post from the G2 S/W & Apps discussion) Hello fellow G2ers. Christoph / DL1YCF, who has been actively maintaining and enhancing John's / G0ORX wonderful program PiHPSDR, has merged in all of my Saturn PiHPSDR code to his repo. Please follow the procedure below to update your git re...
by n1gp
Wed Oct 18, 2023 4:49 pm
Forum: G2 Operating System & Applications
Topic: G2 PiHPSDR NOTICE
Replies: 5
Views: 5281

G2 PiHPSDR NOTICE

Hello fellow G2ers. Christoph / DL1YCF, who has been actively maintaining and enhancing John's / G0ORX wonderful program PiHPSDR, has merged in all of my Saturn PiHPSDR code to his repo. Please follow the procedure below to update your git repo to point to his. Also, please direct general PiHPSDR is...
by n1gp
Mon Oct 09, 2023 9:24 am
Forum: G2 Operating System & Applications
Topic: G2 Firmware update 5/10/2023
Replies: 14
Views: 4102

Re: G2 Firmware update 5/10/2023

Click on the terminal icon on the top bar to get a command prompt:

term.png
term.png (9.55 KiB) Viewed 3635 times


Then type:

cd github/Saturn/sw_projects/P2_app

rm p2app

make
by n1gp
Sat Oct 07, 2023 4:10 pm
Forum: G2 Operating System & Applications
Topic: G2 Firmware update 5/10/2023
Replies: 14
Views: 4102

Re: G2 Firmware update 5/10/2023

Run

git config --global user.email "you@example.com"
git config --global user.name "Your Name"
by n1gp
Wed Oct 04, 2023 6:47 pm
Forum: piHPSDR
Topic: pihpsdr not working after update
Replies: 2
Views: 2265

Re: pihpsdr not working after update

John, There has been a lot of work going on this past week or so fixing bugs and improving operations. There will be an announcement soon of the work being done and upgrade instructions. For now please try upgrading again, I pushed a change to allow your current firmware to work with pihpsdr. -Rick ...
by n1gp
Sun Oct 01, 2023 9:20 pm
Forum: G2 Operating System & Applications
Topic: G2 Software and Firmware Updates
Replies: 85
Views: 24285

Re: G2 Software and Firmware Updates 27 Aug 2023

@ct1iqi I'm also running 64 bit, but raspbian -vs- armbian: $ uname -a Linux raspberrypi 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 GNU/Linux There certainly may be differences in your armbian arm64 running a 6.5 kernel with perhaps newer gtk3 packages. Is your CM4 running from...
by n1gp
Sun Oct 01, 2023 7:12 pm
Forum: G2 Operating System & Applications
Topic: G2 Software and Firmware Updates
Replies: 85
Views: 24285

Re: G2 Software and Firmware Updates 27 Aug 2023

@ct1iqi

Can you check and make sure that on your G2's native pihpsdr that
in the TX menu, Radio Mic is set to Mic In ?
Mic.png
Mic.png (53.72 KiB) Viewed 8299 times


Failing that, maybe try deleting your props file in that directory (with pihpsdr NOT active),
mine is E4-5F-01-C2-1F-88.props
by n1gp
Fri Sep 22, 2023 6:53 pm
Forum: piHPSDR
Topic: piHPSDR G2 encoder menue
Replies: 13
Views: 4166

Re: piHPSDR G2 encoder menue

Hi Norbert,

Look in release/LatexManual/piHPSDR-Manual.pdf

This was work done by Christoph / DL1YCF
by n1gp
Fri Sep 22, 2023 5:30 pm
Forum: piHPSDR
Topic: piHPSDR G2 encoder menue
Replies: 13
Views: 4166

Re: piHPSDR G2 encoder menue

Hi Guys,

Try updating pihpsdr again, I just checked in a couple of changes:

[saturn 0eaa539] Fix for encoder_menu not editing correctly, also added ability to set back to defaults.

-Rick / N1GP
by n1gp
Thu Sep 21, 2023 10:27 am
Forum: piHPSDR
Topic: G2 and piHPSDR RigCtrl startup of CAT connection
Replies: 6
Views: 3080

Re: G2 and piHPSDR RigCtrl startup of CAT connection

Try updating pihpsdr again. I was actually working on merging in some
changes in the serial handling code on 9/19 which turned out to have a bug,
but the current (todays) should work OK.
by n1gp
Fri Sep 15, 2023 8:50 pm
Forum: Protocol 2 Firmware (all radios)
Topic: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1
Replies: 35
Views: 29631

Re: So Disappointed But I Rolled it Back. 7000 MK III To Protocol 1

Hi Vin, Sorry to hear of your troubles getting P2 to work on your ANAN. I take it you have a MkIII which is using the Cyclone V FPGA, 5CEFA I wonder if you could try the below gateware, it is generally all of the Protocol 2 with the exception of Gigabit Ethernet support. It runs the same speed as P1...
by n1gp
Tue Sep 12, 2023 6:38 pm
Forum: piHPSDR
Topic: rec audio clicking/chopping on peaks
Replies: 57
Views: 33057

Re: rec audio clicking/chopping on peaks

For more context, I had said, 'But, then I decide to do it from a VNC connection.' By which I mean that previously I had the HDMI cable plugged into the back in HDMI1 and using a USB Mouse and Keyboard plugged into the back USB connector. My Pi desktop was in my HDMI monitor and I started a terminal...
by n1gp
Tue Sep 12, 2023 4:20 pm
Forum: piHPSDR
Topic: rec audio clicking/chopping on peaks
Replies: 57
Views: 33057

Re: rec audio clicking/chopping on peaks

Another thing to check is the CPU frequency. We found that the CM4 CPUs run fine @ 2 Ghz To see what it's current max is: pi@raspberrypi:~ $ cat /sys/devices/system/cpu/cpufreq/policy0/cpuinfo_max_freq 2000000 If not 2000000, check /boot/config.txt file and add the following lines: over_voltage=6 ar...
by n1gp
Tue Sep 12, 2023 4:09 pm
Forum: piHPSDR
Topic: rec audio clicking/chopping on peaks
Replies: 57
Views: 33057

Re: rec audio clicking/chopping on peaks

OK, I tried to replicate your results, if I do 2 rx @ 768k I can get breaks in the audio using XDMA. But, then I decide to do it from a VNC connection. With it connected and running pihpsdr in the VNC client window, it only takes 1 rx @ 48k and there are lots of audio breakups/glitches. It doesn't l...
by n1gp
Tue Sep 12, 2023 2:50 pm
Forum: piHPSDR
Topic: rec audio clicking/chopping on peaks
Replies: 57
Views: 33057

Re: rec audio clicking/chopping on peaks

How does it sound if you run p2app AND run pihpsdr, but choose Network
instead of XDMA in the discovery box?

Same test with 1 rx, 48/192/384 kHz, then 2 rx...
by n1gp
Fri Sep 08, 2023 7:21 pm
Forum: piHPSDR
Topic: rec audio clicking/chopping on peaks
Replies: 57
Views: 33057

Re: rec audio clicking/chopping on peaks

Also if you can share a video/audio of it happening, that would be helpful.

Audio settings, Filter widths, anything that isn't default.

Which audio output, or all?
by n1gp
Sun Sep 03, 2023 10:41 am
Forum: Hermes Firmware (10 & 100)
Topic: Recovering an ANAN-10
Replies: 20
Views: 29805

Re: Recovering an ANAN-10

I see the same voltages on U1 except for pin 5. It is near 0 with or without the Blaster plugged in It is also near 0 with or without J12 plugged in I don't think J12 should change the voltage readings, its used to swap the flash banks. If the Blaster isn't plugged in, that 1.44v your seeing is prob...
by n1gp
Sat Sep 02, 2023 11:44 pm
Forum: Hermes Firmware (10 & 100)
Topic: Recovering an ANAN-10
Replies: 20
Views: 29805

Re: Recovering an ANAN-10

My U1 Voltages are very similar to yours except pin 5. On Pin 5 I see nearly 0 volts either with or without the Blaster attached. Your seeing 1.08v with or without the Blaster attached. What if there is a problem with D7 causing the line to be pulled towards 3.3v? diodes.png Maybe replace D2, D7, an...
by n1gp
Sat Sep 02, 2023 8:00 pm
Forum: Hermes Firmware (10 & 100)
Topic: Recovering an ANAN-10
Replies: 20
Views: 29805

Re: Recovering an ANAN-10

Kurt, I don't know of any document that exists for Hermes with that kind of data. There's a lot of people who have built the Hermes boards from scratch and may have posted issues like this on the openhpsdr list: http://lists.openhpsdr.org/pipermail/hpsdr-openhpsdr.org/ Maybe a google search with lis...
by n1gp
Sat Sep 02, 2023 11:05 am
Forum: Hermes Firmware (10 & 100)
Topic: Recovering an ANAN-10
Replies: 20
Views: 29805

Re: Recovering an ANAN-10

Hi, Theoretically you shouldn't be able to erase/program the bootloader section of the eeprom using the network based programmers. You need to use the USB Blaster for that. I wouldn't use it unless your absolutely sure the bootloader code isn't working. Not sure if you have this doc: https://www.dro...
by n1gp
Tue Aug 29, 2023 4:58 pm
Forum: G2 Operating System & Applications
Topic: P2app does not run after Raspbian update
Replies: 4
Views: 2714

Re: P2app does not run after Raspbian update

Hi Carmine,

There is another thread that covers this issue and how to fix it.
Check out:

https://community.apache-labs.com/viewtopic.php?f=48&t=4772

-Rick / N1GP
by n1gp
Sun Aug 27, 2023 9:09 pm
Forum: G2 Operating System & Applications
Topic: G2 Software and Firmware Updates
Replies: 85
Views: 24285

Re: G2 Software and Firmware Updates 27 Aug 2023

Hi, It looks like libgpiod-dev may not have been installed in this release. I have tried to recreate this using the Apache-Labs image and these steps work for me: (change to your email and name) (only needs to be done once) git config --global user.email "test@youremail.com" git config --g...
by n1gp
Sun Aug 20, 2023 5:29 pm
Forum: Protocol 2 Firmware (all radios)
Topic: New 70000LE MKIII With Protocol 1
Replies: 9
Views: 19890

Re: New 70000LE MKIII With Protocol 1

Hi Torrey, Sorry to hear your having such trouble getting P2 to work with your MkIII. You definitely have a EP4CE115F29C8N Cyclone IV series FPGA since the "26c" version sort of works and Metis_Orion_MkIII_P2_CV_21.7 does not work. The 26c is for the EP4CE115F29C8N Cyclone IV and would not...

Go to advanced search