w2ner wrote:I got mine working again, I unchecked "wheel tunes outside spectral" and re enabled it. all good now.

ok that points to something, any idea how long this has been happening?

You click it so it turns blue, to give it focus, you can see the 'caret' flashing on the right hand side. This is so you can type numbers in there, as a 'normal' text box. Mouse wheel does not work when blue, at least i haven't ever seen it working like that. To use mouse wheel you just hover the mo...

UPDATE Hi Rob, Chas, Can you try with ref to the bandstack problem : https://www.dropbox.com/s/zlmxh4ynhowlpvg/Thetis_1305_021119_e1.zip?dl=0 Note: If you have the new 11/1/19 installed from Doug, then you only need Thetis.exe from the zip, otherwise everything. Cheers, Richie. (11/1/19) e1 ⋅&...

Hi all, for your info - with the D6 version scrolling the qrg with the mousewheel won´t work in the panadapter when I before tried to scroll in the frequency window. Have now 4.1d and all o.k. 73, Helmut Which d6 version? and where are you using the mouse wheel? If you are just using mouse wheel in...

Thanks Richie. The data line with anti-aliasing disabled is not nearly as smooth, and this is above a 1.0 line size, as it is when enabled. The data line with it disabled, looks like the data line when I have GDI+ selected. Anyway, thanks for putting in an "on/off" switch hi hi. ;) I enjo...

small issue to report. In Andromeda (Top and bottom enabled) having CTUN enable and switching to TX the display changes and displays TX on a different frequency. See attached screeners. BTW LOVE THE INTERFACE !!! Slick and modern! Cheers, Hauke Can you provide steps to get this to happen? Cheers Ri...

One thing thats its doing now is, the Rec ant is coming on by default when I power it up. Even if I set it, save the profile it still comes up with the Rec antenna enabled on power up. need more info Nicholas. I can click it to change to tx ant and rx ant, and closing down brings it back in the sta...

Cheers all for the feedback. d2... there is a massive change that had to be done to resolve ui thread from locking from time to time - change: vfoa/b/suba now all use property get/set with single point of text conversion, and member variables to hold frequencies instead of direct access to text boxe...

I think I have tracked the issue Rob, but it will take me a bit to resolve it. Running out of steam here now 3:20am so will pick back up tomorrow. Ok about the DB, yes I went and checked mine here, and ran it in US region, but all looked ok. Also all noted about Androm issue Hauke. Doug has released...

I can't replicate it here.... very very odd.



Richie.

Cheers Rob. Will keep looking. Do me a favour, try exactly the same test, but click band button to move stack very slowly, one once per 5-10 seconds.

Richie.

UPDATE (last for D run I hope) Hi Rob, Chas, everyone Please try : https://www.dropbox.com/s/crioh3xc0cdpyd1/Thetis_2205_011119_d6_2.zip?dl=0 Please let me know if the CW stack anomaly is fixed. Doug is going to give me a black mark when I send him the source again (for the 3rd time).... eeek :lol:...

Hi Perry, Yes, this is due to anti-aliasing being disabled. To draw a line narrower than 1 pixel nicely anti-aliasing needs to be enabled. Best you can do at the mo is set line width to 1.0 and pick colour that is dimmer/darker than you really want. I made the change to bring it into line with the G...

wa1oxt wrote:Wow... that was quick !!!

Great job on d6-1.

Thank's Rich

wa1oxt / / garyradio

I don't really know if it fixed the issue as I couldn't replicate it here. However I did find something related, which may have been causing some oddities.

Richie.

Hi Rob,

If you have a mo, could you try : https://www.dropbox.com/s/cg4yqonzcynke ... 1.zip?dl=0

Richie.

Hi Richie, All frequencies are fine until I turn on RX2 and add the SYNC VFO button. I then notice that some of the band stacking frequencies change by 400 Hz down. This is the same frequency that I use for CW pitch or offset on my Anan. This frequency change only occurs when both receivers are on ...

ah ok, I understand now ref the fwd/swr This option is not available in the drop down list in setup either, which is the issue basically. The conflict between profile etc was still a problem, so one out of two aint bad :D :lol: edit: and then need to check if edge/original in use, because original d...

Yes it is very handy it has to be said. I am waiting for someone with -ve numbers, and depending now how large those -ve numbers are will give us an idea if we need the PRO system back in here. As you say, with just +ve values, not much we can do.

73 Richie.

Richie, After about 8 hours of continuous receive operation and three short QSOs, without paying any attention to checking the log, this is what I have at the end of the day. It might be handy if the log had time tags and was also tagged as to whether the mode was RX or TX. To me it looks like a pa...

UPDATE Hi all, Please try : https://www.dropbox.com/s/cg4yqonzcynkejv/Thetis_0318_011119_d6_1.zip?dl=0 (10/7/19) d6 ⋅ add: uV (rms) option for meter text. Changed through setup, or by clicking the text area of the meter. It will cycle smeter, dbm, uv. Feature requested by wa1oxt ⋅&nb...

W1AEX wrote:Richie,
It's all running smoothly here.

Ah good stuff Rob

Richie.

W3MMR wrote:No, I didnt... Sorry about that. Ill include it and get back to you...

Perry

you want to include everything that is in the zip, not just parts of it

Richie.

ok Perry,, did you include channelmaster.dll from the d5 zip? or just the exe?

It looks like you perhaps are getting a rare (10min ish) SEQ error and the front end is trying to get the data from channelmaster.dll



Richie.

ea3aqr wrote:

Tony EI7BMB wrote:Just took a look at the SEQ log after a few hours and its blank. I'm hoping this means no errors

I hope so...

Yep

Okay, well if you can fix that display freezing problem when panning, that would be great. d5 updated above. Looks like PAN/ZOOM will be a no. After looking at it quickly, everything pretty much gets set when you slide that pan/zoom and I guess that no pixel data is being returned during the change...

typing a feq into mine works for what its worth errr odd, you using d5? I can type one in, but if i press enter it doesn't change. The issue is a bit tricky to resolve. Exploring options atm. Text box contents is not updated until focus is lost in windows forms, and recent changes to lost focus for...

One thing I noticed and not sure if this can be changed or not. When you PAN the waterfall and pan adapter freezes until you stop panning. It would be great if this can be changed so the display is live during panning. probably Nicholas. note: there is an issue I am tracking down atm, when typing i...

One thing I noticed and not sure if this can be changed or not. When you PAN the waterfall and pan adapter freezes until you stop panning. It would be great if this can be changed so the display is live during panning. probably Nicholas. note: there is an issue I am tracking down atm, when typing i...

UPDATE HI all, Please try : https://www.dropbox.com/s/eh9dn1ongtd5lqw/Thetis_0552_301019_d5.zip?dl=0 Just a WIP build, that hopefully fixes some annoying issues. Includes the initial pass of SEQ logging. The 'special panafall' mode wont return until the displays are 'split' and the mid point of eac...

Hi Richie, Nice work! It will be very interesting to see what the "real world" log will look like after clumsy is turned off and the un-tampered packets are streaming in. 73, Bryan W4WMT Hi Bryan, yes it will be. I am seeing loss here from time to time, which undoubtedly is the hotchpotch...