Search found 271 matches

by K9RX
Thu Aug 03, 2017 8:54 pm
Forum: PowerSDR mRX
Topic: Issue with XMIT on Anan 8000DLE
Replies: 6
Views: 2079

Issue with XMIT on Anan 8000DLE

This is using the latest version PSDR, I believe 3.4.2 and an 8000DLE. I've been working on the radio, getting things set up the way I like it for a couple weeks now. With the help of Scott, Rob and Stu. For the most part everything is working well - or was working well. I had the system up and runn...
by K9RX
Mon Jul 31, 2017 9:12 pm
Forum: PowerSDR mRX
Topic: DUP, Anan Step Atten, S-ATT, ATT on TX ??
Replies: 8
Views: 2042

Re: DUP, Anan Step Atten, S-ATT, ATT on TX ??

Stu - good idea - I like that about WSJT ... meanwhile - Scott, I see what you're saying but that doesn't address why Rob's videos show a floor of -140! THAT is why I've been assuming it was the same. With that said - and I might have, I think I have been here before - but i just got the display to ...
by K9RX
Mon Jul 31, 2017 5:06 pm
Forum: PowerSDR mRX
Topic: DUP, Anan Step Atten, S-ATT, ATT on TX ??
Replies: 8
Views: 2042

Re: DUP, Anan Step Atten, S-ATT, ATT on TX ??

Will do - one thing I didn't state clearly before - I wanted to understand what DUP was and from you I know it is exactly what I thought it was. I didn't want to go in with an assumption ... so if, or since it is indeed RECEIVING the signal - my signal - then why am I directed to adjust the TX setti...
by K9RX
Mon Jul 31, 2017 3:43 pm
Forum: PowerSDR mRX
Topic: DUP, Anan Step Atten, S-ATT, ATT on TX ??
Replies: 8
Views: 2042

Re: DUP, Anan Step Atten, S-ATT, ATT on TX ??

Great - thanks - that helps a great deal. So another question re "DUP" use ... when I look at W1AEX's video's and the screen shots pasted in his written docs they all look like receive views ... i.e. the floor is -140 db ... but when I TX I don't get this - I have to use the DISPLAY/TX con...
by K9RX
Mon Jul 31, 2017 3:36 pm
Forum: Digital ("Virtual") Audio
Topic: Which DAC?
Replies: 7
Views: 2527

Re: Which DAC?

ok .... but I'm not sure you addressed my question - or if you did I didn't get it .... again PSDR is set to 48K. WSJT is looking for 48K ... when I "use" this setup and I open up M-VAC/CP it shows ...Ok - I just looked at it today: Cable 1 line in to WSJT shows: ExtPCM/192000/32/2(3) Cabl...
by K9RX
Mon Jul 31, 2017 12:53 am
Forum: PowerSDR mRX
Topic: DUP, Anan Step Atten, S-ATT, ATT on TX ??
Replies: 8
Views: 2042

DUP, Anan Step Atten, S-ATT, ATT on TX ??

Scott, I thought about putting this on the yahoo group but wanted a smaller audience, and to keep it here for general reference - and hopefully have YOU answer it ... thanks OK - I've gone through the manual, again, and have the following questions: I don't believe these things are covered or at lea...
by K9RX
Mon Jul 31, 2017 12:06 am
Forum: Digital ("Virtual") Audio
Topic: Which DAC?
Replies: 7
Views: 2527

Re: Which DAC?

Jumping on this discussion if I may.... I watched G7CNL (?) video on setting up M-VAC (i had up until now referred to it as VAC (Eugene) but prefer this as well) ... he says to set the sampling to 8K to 192K ... which of course I did. I have the sampling for this set to 48K on the radio (PSDR) ... b...
by K9RX
Thu Jul 27, 2017 9:46 pm
Forum: PowerSDR mRX
Topic: PSDR mRX General use questions...
Replies: 23
Views: 6634

Re: PSDR mRX General use questions...

Stu, Apologies for not answering your questions. I believe as mentioned I've resolved the problem and believe, with lack of information, that I was the cause of the 'bad' audio first by not properly adjusting the TX audio and second by then jumping ahead and trying PS2. That stated as a response to ...
by K9RX
Thu Jul 27, 2017 9:36 pm
Forum: PowerSDR mRX
Topic: PSDR mRX General use questions...
Replies: 23
Views: 6634

Re: PSDR mRX General use questions...

Stu, Thanks. Ok - first let me say I did the same thing to resolve this latest problem that I did for the CW sidetone problem and for the "DUP" display not working. I reset the DB! As someone that believes that should be absolutely one of the last things to try. That was it. I re-entered i...
by K9RX
Tue Jul 25, 2017 3:45 pm
Forum: PowerSDR mRX
Topic: PSDR mRX General use questions...
Replies: 23
Views: 6634

Re: PSDR mRX General use questions...

unless someone has an immediate suggestion I'm done for a while... this is taking up too much of my time. NOW I can't get the TX audio to work right. Nothing changed since I last used it - but listening on another radio there is very weak crackling audio heard there. As I ask my customers: "wha...
by K9RX
Tue Jul 25, 2017 12:52 pm
Forum: PowerSDR mRX
Topic: PSDR mRX General use questions...
Replies: 23
Views: 6634

Re: PSDR mRX General use questions...

Scott, This was an open set of questions for anyone here .... are you and I (and a few others) the only ones here? Really - I'm not a nube here... I DO know what I'm doing for the vast majority of it. I've had a Flex5000... I've had a Flex6700.... I am an accomplished EE and a HW/SW embedded designe...
by K9RX
Tue Jul 25, 2017 12:09 am
Forum: PowerSDR mRX
Topic: PSDR mRX General use questions...
Replies: 23
Views: 6634

Re: PSDR mRX General use questions...

DISPLAY DURING SSB TX And he has a sense of humor too boot! Bread in - broccoli out ... that's funny. ok - I'll start a separate thread for each question. I would say however it shouldn't/wouldn't divulge in to "Gary's Problems" if kept here - HOPEFULLY the title to THIS one is indeed spec...
by K9RX
Sun Jul 23, 2017 11:51 pm
Forum: PowerSDR mRX
Topic: PSDR mRX General use questions...
Replies: 23
Views: 6634

Re: PSDR mRX General use questions...

Hopefully the "General Use" name on the top of this thread, as when I made that folder that was what I thought would be appropriate, is understood as - general use questions and not "a" question ... not sure Scott how we'd do that otherwise ... that might be a better place/reason...
by K9RX
Sun Jul 23, 2017 11:40 pm
Forum: PowerSDR mRX
Topic: PowerSDR mRX PS v3.4.2 A wish list
Replies: 6
Views: 2558

Re: PowerSDR mRX PS v3.4.2 A wish list

this (above) was posted on the 11th with no replies... is there a better place for "wish list" type items?

regards,

Gary
K9RX
by K9RX
Sun Jul 23, 2017 6:52 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: Pan display using FT8 - big sidebands on TX
Replies: 6
Views: 2807

Re: Pan display using FT8 - big sidebands on TX

Scott, I have ... I need to go check ... ok - VAC1 is set to 2048 (buffer) and 48000 ... also not sure what it is but the buffer latency is set at 120mS. Note when I open up the control panel for Eugene's (not remembering the last name) VAC program it shows this cable as using "192000"1 Th...
by K9RX
Sat Jul 22, 2017 4:44 pm
Forum: PC's & Homebrew Hardware
Topic: LatencyMon Benchmarks
Replies: 65
Views: 18692

Re: LatencyMon Benchmarks

and sure enough - go back and let LatencyMon run and within a few minutes it starts to rise ... it now says it is not suitable for audio and the values are above 3mS for the Highest Reported DPC and ISR. I guess I'll need to try to hunt down what is causing it - assuming it is one thing. It says the...
by K9RX
Sat Jul 22, 2017 4:08 pm
Forum: PC's & Homebrew Hardware
Topic: LatencyMon Benchmarks
Replies: 65
Views: 18692

Re: LatencyMon Benchmarks

Gentleman, Forgive me but it seems this post has diverged here and there.... there are a number of posts showing what you all are getting individually - but the title here is "Benchmarks" .... so I ask : what are the benchmarks!? I had an Flex5000 at one time and their manual had values NO...
by K9RX
Sat Jul 22, 2017 3:53 pm
Forum: Digital Mode, Rig Control & Logging Software
Topic: Pan display using FT8 - big sidebands on TX
Replies: 6
Views: 2807

Pan display using FT8 - big sidebands on TX

This is while using the 8000DLE on FT8, WSJT-X, VAC by Eugene.... not using PS When I transmit I have the normal 0 db ALC value. The display shows the tone and the rest of the signal in the passband is maybe 70 - 100 db down where you see the normal 'ripples' .... but occasionally, as the tone is sw...
by K9RX
Sat Jul 15, 2017 8:49 pm
Forum: PowerSDR mRX
Topic: PSDR mRX General use questions...
Replies: 23
Views: 6634

Re: PSDR mRX General use questions...

Scott has provided the first info I have heard of that indeed there is I/O for it... I knew through looking at the schematic that there's AI's on the one header - I assume that is J16 (dont' have the - here it is - yes, J16) ... I remember looking at the unit already available... I remember there's ...
by K9RX
Thu Jul 13, 2017 5:44 pm
Forum: PowerSDR mRX
Topic: PSDR mRX General use questions...
Replies: 23
Views: 6634

Re: PSDR mRX General use questions...

Scott,

That is indeed my current plan - just to have a bang-bang controller from the ALC (out of the amp) to the TX INH input.

g.
by K9RX
Thu Jul 13, 2017 2:41 pm
Forum: PowerSDR mRX
Topic: PSDR mRX General use questions...
Replies: 23
Views: 6634

Re: PSDR mRX General use questions...

Re: ALC : No - I'm not misunderstanding - I just can't seem to get across what I'm talking about ... It has to be me - I don't understand why people always misinterpret what I'm saying! I have and had said specifically I am not looking for ANY actions of ALC to limit voice peaks or anything along th...
by K9RX
Wed Jul 12, 2017 12:38 pm
Forum: PowerSDR mRX
Topic: PSDR mRX General use questions...
Replies: 23
Views: 6634

Re: PSDR mRX General use questions...

Thanks Scott, Ok .... for listening to my SSB signal - I'd still like to hear it with all adjustments in place. I want a strong DX signal as I have with my Yaesu ... that means processing. I know there are those that like high fidelity - that's not me (not that I want a poor signal of course). I get...
by K9RX
Tue Jul 11, 2017 7:55 pm
Forum: PowerSDR mRX
Topic: PSDR mRX General use questions...
Replies: 23
Views: 6634

PSDR mRX General use questions...

Ok ... I've finally used the rig to xmit (been testing receive through A/B comparison to an FTdx5000). Worked a G0 station on 20M JT65 using 1W .... and then a YU station on 40 CW using 1W as well ... question: 1) when using JT65 the waterfall turns bright white when xmitting - is there no way to st...
by K9RX
Tue Jul 11, 2017 6:45 pm
Forum: PowerSDR mRX
Topic: PowerSDR mRX PS v3.4.2 A wish list
Replies: 6
Views: 2558

Re: PowerSDR mRX PS v3.4.2 A wish list

Continuing on with that thought .... -Please consider adding the ability to 'slice off' 3 bits of the 7 Outputs .... this would be to use 4 for an antenna switch and the other 3 for a FREQUENCY SEGMENT antenna switch. I know there is an option to slice it off to use for transverters so this would be...
by K9RX
Sun Jul 09, 2017 12:32 am
Forum: Digital Mode, Rig Control & Logging Software
Topic: Poor JT65 performance using Anan8000DLE - help?!
Replies: 2
Views: 2004

Poor JT65 performance using Anan8000DLE - help?!

Ok ... so I am continuing my quest for the 'better' radio ... have both the Anan 8000 and my Yaesu 5000 configured for WSJT/JT65 using WSJT-X. Two instances set up the same. The Yaesu is using the codec from the MicoHam Keyer II that it is connected to (use it for all connections/serial/audio). The ...
by K9RX
Thu Jul 06, 2017 1:11 pm
Forum: MIDI Controllers
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 13355

Re: TouchOSC custom tablet MIDI control surface

Scott, Its not an issue of whether or not I CAN do it ... I just thought since you've already done it it would be somewhat simple to do an export of the settings from PSDR/MIDI... if not I can indeed do it. Also there are obviously nuisances that aren't going to be gathered by trying it yourself - f...
by K9RX
Wed Jul 05, 2017 11:33 pm
Forum: MIDI Controllers
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 13355

Re: TouchOSC custom tablet MIDI control surface

Scott, Thanks for the reply .... the good news is this was a good day re getting more info. I found through reading various things scattered around docs on midi originally done in April of last year on the file system of the Yahoo forum. I had not been there as yet (nor seen references to it until I...
by K9RX
Mon Jul 03, 2017 7:02 pm
Forum: MIDI Controllers
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 13355

Re: TouchOSC custom tablet MIDI control surface

Scott, Is there some way for you (and thus others) to also show/provide the MIDI settings from within PSDR for your template? Obviously having the template, although it saves a great deal in not having to use the editor or at least reducing the 'base' planning, doesn't satisfy the needs of MIDI/PSDR...
by K9RX
Sun Jul 02, 2017 2:37 pm
Forum: MIDI Controllers
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 13355

Re: TouchOSC custom tablet MIDI control surface

SUPER! I was hoping someone had a template to start with!! It is indeed quite tedious work using the editor. I plan on using a proper DJ panel with a jog wheel for the VFO's and the more commonly exercised functions like VOL, AGC, A<B, SPLIT etc ... but the less often used ones on the tablet like ba...
by K9RX
Sun Jul 02, 2017 1:54 pm
Forum: MIDI Controllers
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 13355

Re: TouchOSC custom tablet MIDI control surface

Ok - never mind ... at least for the "can't get it to run again" part ... my dumb mistake. I KNOW you can't just drag an app to the desk top - but i did that anyway. I saw the "exe" and assumed, obviously incorrectly, that it was self-contained ... I'm talking about Touch-Bridge....

Go to advanced search