Hello Leif.
I use WSJT-X 2.2.2 but together with Windows 10 Pro. There I have chosen Kenwood TS-2000 as rig and it works perfectly.
Also run DXLab and VoiceMeeter Potato for rig control, log etc. and audio routing.
Search found 79 matches
- Mon Jan 25, 2021 9:35 am
- Forum: linHPSDR
- Topic: Settings WSJT-X <> lin HPSDR ?
- Replies: 4
- Views: 271
- Thu Oct 08, 2020 9:26 pm
- Forum: Thetis
- Topic: Thetis 2.8.11 Released!
- Replies: 231
- Views: 36324
Re: Thetis 2.8.6 Released!
Finally an update!
Works great at once here.
Thanks for that
Works great at once here.
Thanks for that

- Fri Jul 24, 2020 10:14 pm
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: Anan radios ;)
- Replies: 1
- Views: 726
Anan radios ;)
I did not really know where this could fit, so I apologize if it goes wrong! Strange that it can be perceived so differently between people. Sure, it's good that you are happy with your stuff, but there are limits ... Hi hi. You do not need to value other rigs just because you do not have the knowle...
- Wed May 20, 2020 5:15 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: First Attempt with AMP Running
- Replies: 11
- Views: 3668
Re: First Attempt with AMP Running
Funny Larry to see you have the same setup as I have. Has a 200D with an Acom 1500 also with WaveNode equipment for the whole shack.
It works well for me too.
It works well for me too.
Re: 2.7.0
Richie, obviously you don't release news for Thetis when you make Sun SDR movies instead :) Just kidding, keep up your great job you do ;) Sorry, but just had to write this jokingly when sitting as a child on Christmas Eve and waiting for a package delivery on news for Thetis :D You are the man rega...
Re: 2.7.0
Whooha, looks good Richie 

Re: 2.7.0
Neither do I, everything seems to work perfect.
Thank you so much for the updates Richie
Thank you so much for the updates Richie

Re: 2.6.9
Fun with a little bling bling too. Almost missing that part from KE9NS software modifications of Power SDR to old FlexRadios.
Thanks so much Richie and keep up the good job
Happy weekend to everyone from Sweden!
Thanks so much Richie and keep up the good job

Happy weekend to everyone from Sweden!
Re: 2.6.8
Wow, more news, thank you so much Ramdor! It seems to work great. One thing I noticed at the first d revision is that if you have CTUN enable and restart the radio then the passband is always start in the middle of the window and not where I left it. As far as adding a status bar to the bottom of th...
- Thu Oct 10, 2019 1:43 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Installing Protocol-2 on my 100D FAIL!!!
- Replies: 3
- Views: 3000
Re: Installing Protocol-2 on my 100D FAIL!!!
Good news Ben!
Hope you find it as interesting and good as the rest of us
Hope you find it as interesting and good as the rest of us

Re: 2.6.8
w2ner wrote:Thanks Riche for the updates. I'm sure I speak for everyone, wish you lived closer as we all need to take you out to the pub and live it up!!
+ 1 on this

Re: 2.6.8
Exciting!
Will be testing this as soon as I get home from work tonight
Will be testing this as soon as I get home from work tonight

Re: 2.6.8
Really like to have such a big monitor. Think there is a picture on my QRZ page on my setup. Is not up to date, but about anyway ;) I looked at your QRZ page and your new setup is beautiful! You should post a photo of it here running Thetis in 4K. 73, Scott Thanks for that Scott! I'm just waiting f...
Re: 2.6.8
50" monitor???? Holy crap.[/quote]
Really like to have such a big monitor. Think there is a picture on my QRZ page on my setup. Is not up to date, but about anyway
Really like to have such a big monitor. Think there is a picture on my QRZ page on my setup. Is not up to date, but about anyway

Re: 2.6.8
Running c1 384KHz sample rate on 50" 4k 60Hz monitor 60fps currently showing around 7% CPU here on a newly built i9 9900K @5GHz.
Re: 2.6.8
We are eternally grateful to all the mods for sure, so I just say keep up the good work and it's so damn fun to get something new no matter the size of it all!
As someone previously said: it's like a new radio every day
As someone previously said: it's like a new radio every day

Re: 2.6.8
Hello everybody! Now I have started from the beginning with a clean installation and manually adjusted all settings and it works just fine. The only thing that is a pity is one of my favorite features, namely Special PanaFall Mode which does not work. But otherwise everything seems to work as it sho...
Re: 2.6.8
Good news ramdor!
I'll try this when I get home from work tonight and announce how it works
I'll try this when I get home from work tonight and announce how it works

Re: 2.6.8
Hi! It was this that I tried to explain a bit above here. It was the same phenomenon in the last big release of Thetis and then it worked if you changed the language of the computer to English which I have not been able to test this time. It is different how comma and dot are used what I can see in ...
Re: 2.6.8
Hey all! My 200D Rev 24 got pretty weird with 2.6.8 on many points and I was forced to go back to 2.6.7. To mention one thing, there were four decimal places on the frequency and they could not be zeroed. After a while, it also crashed. Compare the XML documents to both versions and see that points ...
- Mon Apr 15, 2019 9:08 pm
- Forum: Thetis
- Topic: Thetis 2.6.4: Major New Release
- Replies: 40
- Views: 14525
Re: Thetis 2.6.4: Major New Release
Thank you so much for your input Rob!
I have set to 125% scaling, but unfortunately no difference if I change neither up nor down.
I have set to 125% scaling, but unfortunately no difference if I change neither up nor down.
- Mon Apr 15, 2019 6:54 pm
- Forum: Thetis
- Topic: Thetis 2.6.4: Major New Release
- Replies: 40
- Views: 14525
Re: Thetis 2.6.4: Major New Release
Unfortunately same Fatal Error om my side 

- Wed Jan 30, 2019 6:57 pm
- Forum: PC's & Homebrew Hardware
- Topic: Need an on/off switch
- Replies: 5
- Views: 5153
Re: Need an on/off switch
I've also had this problem with my 200D. Noted that the switch went a little slow, so I unscrewed the front and disassembled the connector and lubricated the actual operating part that is in the front and it went much easier immediately. Assembled everything together and it worked out as it should. ...
- Fri Jan 18, 2019 12:19 am
- Forum: Digital ("Virtual") Audio
- Topic: Voicemeeter Potato (VMP) is here!
- Replies: 46
- Views: 19730
Re: Voicemeeter Potato (VMP) is almost here!
I also have it in operation now and it seems to work very well 

- Sat Dec 08, 2018 12:18 am
- Forum: Protocol 2 Firmware (all radios)
- Topic: New Protocol 2 Firmware Released
- Replies: 29
- Views: 16893
Re: New Protocol 2 Firmware Released
Everything seems to work for me with my 200D Rev 24 except pure signal. No difference with or without it. Otherwise very stable as it seems.
- Sun Sep 02, 2018 5:17 pm
- Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
- Topic: Foot Switch Install
- Replies: 5
- Views: 3440
Re: Foot Switch Install
Enter Setup and General and HardwareConfig and check the box for PTT, then it should work.
- Thu May 10, 2018 1:33 am
- Forum: Digital ("Virtual") Audio
- Topic: Buffert settings just for fun...
- Replies: 6
- Views: 5814
Re: Buffert settings just for fun...
Thank you for your reply friends. Played with my settings tonight on my Mackie Big Knob Studio + soundcard, and found that 512 on Primary and 128 on VAC works best. Had too much buffer set to the sound card earlier as it seems. Do not run any VMB or the like at this time. Then I get to correct previ...
- Sat May 05, 2018 11:53 pm
- Forum: Digital ("Virtual") Audio
- Topic: Buffert settings just for fun...
- Replies: 6
- Views: 5814
Re: Buffert settings just for fun...
No one else who shares what you drive with for buffer settings?
Hmmm
Hmmm

- Sat May 05, 2018 12:21 am
- Forum: Digital ("Virtual") Audio
- Topic: Buffert settings just for fun...
- Replies: 6
- Views: 5814
Buffert settings just for fun...
What are your settings with the new firmware companions?
I have best resultat with 2048 on Primary and 128 in VAC with my USB2 Soundcard in my computer.
Just a thought from me
I have best resultat with 2048 on Primary and 128 in VAC with my USB2 Soundcard in my computer.
Just a thought from me

- Thu Mar 22, 2018 1:10 am
- Forum: PC's & Homebrew Hardware
- Topic: New PC Build: now UPDATED with overclocking performance
- Replies: 54
- Views: 30638
Re: New PC Build: now UPDATED with overclocking performance
Fun to hear you play with different setups and so on, but clearly you can mess with different settings, cables and anything else you did not think about when you started.
I'll just, as it's called ....
We want to see a picture of it, otherwise it never happened
I'll just, as it's called ....
We want to see a picture of it, otherwise it never happened
