Search found 18 matches

by wa1oxt
Wed Sep 11, 2019 3:32 am
Forum: Thetis
Topic: 2.6.8
Replies: 409
Views: 13265

Re: 2.6.8

Great job guy's...the meter is great , now I can see it across the room.
For some reason the software lost the feature of "Show CT H Line" .
It's under Setup/General/Options , Miscellaneous .
Any input ?
oxt
by wa1oxt
Tue May 21, 2019 2:31 am
Forum: Thetis
Topic: Thetis 2.6.7 some issues to fix on next release
Replies: 8
Views: 1725

Re: Thetis 2.6.7 some issues to fix on next release

Anan 100D SDR Project. Thetis SW 2.6.7 FW PC2 _v12.1_pre2_5550.rbf. Anybody catch this error ? 1. While in Xmit , mouse cross hair readout is incorrect approx 1/2 of filter size ( lower left ) on main GUI . 2. Xmit click / drag feature works , but it's also incorrect. Example : While in Xmit do the ...
by wa1oxt
Thu May 16, 2019 5:41 pm
Forum: Thetis
Topic: Thetis 2.6.7 some issues to fix on next release
Replies: 8
Views: 1725

Re: Thetis 2.6.7 some issues to fix on next release

Anan 100D SDR Project. Thetis SW 2.6.7 FW PC2 _v12.1_pre2_5550.rbf. Regarding my earlier post. Problem 2 : Intermittent crash of entire system. This only happens when going into Xmit (on first key up) , never during Xmit and never while in Rx. Windows 10 screen reports an error , collects informatio...
by wa1oxt
Tue May 14, 2019 2:44 am
Forum: Thetis
Topic: Thetis 2.6.7 some issues to fix on next release
Replies: 8
Views: 1725

Re: Thetis 2.6.7 some issues to fix on next release

Anan 100D SDR Project. Thetis SW 2.6.7 FW PC2 _v12.1_pre2_5550.rbf. From my last post.... Problem 1 : Intermittent return to RX after Xmit . Have to cycle Tx/Rx a few times. Observed this on 160 - 10 mtrs. Action: Have to confirm if the cause is a faulty / lazy Tx/RX relay (hardware) . Problem 1 sol...
by wa1oxt
Mon May 13, 2019 3:19 am
Forum: Thetis
Topic: Thetis 2.6.7 some issues to fix on next release
Replies: 8
Views: 1725

Re: Thetis 2.6.7 some issues to fix on next release

Anan 100D SDR Project. Thetis SW 2.6.7 FW PC2 _v12.1_pre2_5550.rbf. Problem 1 : Intermittent return to RX after Xmit . Have to cycle Tx/Rx a few times. Observed this on 160 - 10 mtrs. Action: Have to confirm if the cause is a faulty / lazy Tx/RX relay (hardware) . Problem 2 : Intermittent crash of e...
by wa1oxt
Thu May 09, 2019 8:40 pm
Forum: Protocol 2 (all radios)
Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Replies: 44
Views: 4817

Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in

You can e-mail me @ wa1oxt@yahoo.com.

Don't want to move off the subject here.

oxt
by wa1oxt
Wed May 08, 2019 7:22 pm
Forum: Protocol 2 (all radios)
Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Replies: 44
Views: 4817

Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in

After a few more hours of Test & Measurement , I must say that both PC2 pre2 5550.rbf / Thetis 2.6.7 are stable with my 100D SDR Project. Optimizing the Resampler along with the aid of AmpView and the Rigol test equipment , I was able to tweak the bias on my amp for the best linearity and the le...
by wa1oxt
Wed May 08, 2019 3:23 pm
Forum: Protocol 2 (all radios)
Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Replies: 44
Views: 4817

Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in

Few audio dropouts mentioned in my last post.
After reading Scott's suggestions regarding the Resampler.
Problem solved by tweaking the Resampler.

Tnx Scott.

Attached pix of results @ 67 dBm.

oxt
by wa1oxt
Wed May 08, 2019 5:00 am
Forum: Protocol 2 (all radios)
Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Replies: 44
Views: 4817

Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in

Eval: Thetis 2.6.7_PC2 _v12.1_pre2_5550.rbf Anan 100D SDR Project. Static IP addr from computer to Anan 100D.Project UR 22 audio sound device (USB interface) Audio via VAC -1 VMB (Voice Meeter Banana) set to 96kc/1024 VAC 1 set to 128/96kc DSP SSB (Filter/Buffer size) RX_TX set to 16384/1024 . Resul...
by wa1oxt
Tue May 07, 2019 3:24 am
Forum: Thetis
Topic: Thetis 2.6.7 Fatal Error at startup if certain Bypass options are enabled
Replies: 5
Views: 810

Re: Thetis 2.6.7 Fatal Error at startup if HPF Bypass is enabled

Thetis 2.6.7 .
Same Fatal Error on my 100D. SDR Project.

oxt
by wa1oxt
Mon May 06, 2019 6:26 am
Forum: Protocol 2 (all radios)
Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Replies: 44
Views: 4817

Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in

Installed PC2 ver 12.1 pre2.rbf.

No seq issues over the past 24hrs.
PS is stable and correcting .
Buffer size/Filter Size set to max.
No audio dropouts.


The fuse issue on this Anan 100D motherbd is not an issue as yet.

I will try the other rev 2morrow

oxt
by wa1oxt
Wed May 01, 2019 5:56 pm
Forum: Protocol 2 (all radios)
Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Replies: 44
Views: 4817

Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in

Homebrew SDR Platform.
Anan 100d Motherbd feeding a 50vt. EB-104 SSA with Homebrew pair of 8877's

Stable output with SW ver 2.6.7 / FW ver 12.1.5171 @ +67dBm.

Results ....
PS.2 AmpView attached.
Main GUI attached.


oxt
by wa1oxt
Wed May 01, 2019 5:34 pm
Forum: Protocol 2 (all radios)
Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Replies: 44
Views: 4817

Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in

SW ver 2.6.7 with FW ver 12.1 pre1.5171.

Anan 100d feeding 50vt. EB-104 300wt SSA

2x3cx1500's @ 67 DBM.


oxt
by wa1oxt
Wed May 01, 2019 5:25 pm
Forum: Protocol 2 (all radios)
Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Replies: 44
Views: 4817

Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in

Homebrew SDR. Anan 100d Motherbd feeding 50vt. EB-104 300wt SSA @ approx 160 wts. FW results 1. SW ver 2.6.7/FW ver_12.1 pre1 .5070 results ...PS-2 stable , inband IMD . no seq issues. 2. SW ver 2.6.7/FW ver_12.1 pre1 .5171. results ...PS-2 stable , less inband IMD , Xmit noise floor lower no seq is...
by wa1oxt
Sun Apr 21, 2019 3:13 pm
Forum: MIDI Controllers
Topic: My latest MIDI controller opus
Replies: 9
Views: 1368

Re: My latest MIDI controller opus

Great job Scott.

My DJ console support.

oxt
by wa1oxt
Wed Apr 17, 2019 9:39 pm
Forum: Protocol 2 (all radios)
Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Replies: 44
Views: 4817

Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in

Correction.. my hardware is a 100d motherboard feeding an EB-104 300 watt SS amp !

Sorry for the error.

oxt
by wa1oxt
Wed Apr 17, 2019 9:13 pm
Forum: Protocol 2 (all radios)
Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Replies: 44
Views: 4817

Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in

Intel 980x, 6 core ,12 threads, Nvida Cuda. Anan 100D feeding a EB-104 300wt amp @ 50vts. power output @ 160 watts. Interesting ! Both work with PS. What is interesting is that the IMD of ver 12/5270.rbf ....PS is much better on the 5th , 7th , 9th and up. Ver 12/4070.rbf works also , but the IMD wi...
by wa1oxt
Wed Apr 17, 2019 12:59 pm
Forum: Protocol 2 (all radios)
Topic: Angelia (ANAN-100D) Protocol 2 test pilots: please check in
Replies: 44
Views: 4817

Re: Angelia (ANAN-100D) Protocol 2 test pilots: please check in

Anan 100D ,SW ver. 2.6.4 ,FW ver.11.7 works . Rx,Tx, and PS work great.

FW ver .11.8 failed , When power button pushed 100D would start but no Rx,Tx,display. Many LAN dropouts .
FW ver 11.9. Rx, Tx work , PS inop. PS erratic ,will not correct. No LAN dropouts.

oxt.

Go to advanced search