Thanks Ernt, for the information I have used the extended region and it works without problems

73`s Rafael EA8TK

Thanks for answering Ernst
This afternoon I will try changing the country to see if it works, I know that with Spain it did not work either

73`s Rafael EA8TK

Hello, I have an Anan 100d using the PowerSDR mRX 3.4.9 and I have put an antenna for the 60m band and when trying to transmit I get an error "Out Of Band" The frequency 5,354600 Mhz a combination with your TX filter setting (200,2900) are not within the band specification for your region ...

I will try it, thanks

I have connected the DB37 AL100 cable from MicroHam to RS232 to RS232 / USB adapter, when connecting windows it assigns a COM port in CAT Control to activate that port and automatically the USB Device Router recognizes it. The problem I had is that I had the K5FR vspMgr installed and I don't know th...

little by little it seems that this is coming to fruition, I have finally managed to communicate the MK III with the Anan. I have also managed to connect the HRD and configure the DM780 Now the next challenge is to configure the Win-test, something that I think will be more complicated. WhatsApp Ima...

Good afternoon, Returning to the subject I have received the rs232 to usb adapter, I have put it and it has assigned me COM9. My question now is how do I emulate the TS2000 in OpenHPSDR, since I don't know if I'm doing it right, in the CAT control in ID as: I put TS2000, then I assign the COM9 port ...

I am afraid that the Micro Ham is not really intended for use with SDR radios, although it is possible by using the cables and adapters, a matter of course, because we can also use it. I hope that some day all the radio and accessories will be able to incorporate TCI / IP connections so that their u...

I have received this response in the MicroHam group, since I receive the rs232 to usb adapter and carry out the tests, I will also post the result here. microHAM Interfaces *CAN NOT* connect to an SDR via a virtual port under *any* circumstances. The virtual ports in Router are for a *logging progra...

They do not light, it only indicates that the port is open and the data of the same OPEN 38400 8N1

It does not allow me to assign any port, I can only change Baud rate

https://drive.google.com/open?id=1hkA7FCXJPAezJiw_8XIQthgPWAANDiQ0 https://drive.google.com/open?id=1ydx8PFody99_XbB5wntA3ynH5BdFj6TJ https://drive.google.com/open?id=1fTKLSWgkBjuF-6RN3p-W-hBiKMoKz35Q I put the link because it does not allow me to insert the image

Hi Scott, In the steps that indicate everything right to point 3), I had already carried out all the steps according to the manual and as you indicate. The MKIII recognizes the port indicates the data CAT 15 open 38400 8N1 the problem is that there is no data reading. When I ask for a CAT communicat...

Following Scott/w-u-2-o recommendation transfer to the forum the query that I have made through the mailing list: I am trying to configure a micro Keyer III with my anan 100d, I have created a virtual port I have configured and I see that it recognizes that the port is open (open 38400 8N1) but I ca...