Search found 340 matches
- Mon Jan 15, 2024 10:21 am
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis
Bryan: why can't cmASIO follow the buffer size set by the device driver? The ChannelMaster native audio buffer size is 64 sample frames, it's hard-coded that way from stem to stern, with no provisions to change. So, the expectation is that the hardware ASIO device driver for the host sound interfac...
- Mon Jan 15, 2024 9:54 am
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis
Thanks Bryan, I imagined it was like this because with the same procedure on the p2 everything worked immediately.. Patience. Regarding the fw there is nothing yet for my 5CEFA, only one works well at the beginning (21.7) but after a few minutes of TX it starts to give problems, regardless of the t...
- Sat Jan 13, 2024 3:43 pm
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis
Could it be that the cmASIO functionality only works with protocol2? Hi OM, Yes, that is correct, cmASIO is not supported by protocol_1. I'll have to check why the icon is still green using protocol 1 (I thought we tested that). As far as not being able to run protocol_2 on your MKIII, have you che...
- Wed Jan 10, 2024 11:38 am
- Forum: Apache-specific Hardware Discussions
- Topic: G2 Service/Schematics info
- Replies: 9
- Views: 2298
Re: G2 Service/Schematics info
Just so I don't wait for a response that's never going to come... Is support@apache-labs.com the correct email or has that address been hacked? I don't know if that address is still hacked or not, but it certainly was back in December. Hopefully, they have corrected the problem by now? So please le...
- Tue Jan 09, 2024 11:23 pm
- Forum: Apache-specific Hardware Discussions
- Topic: G2 Service/Schematics info
- Replies: 9
- Views: 2298
Re: G2 Service/Schematics info
KC2QMA wrote:I sent email to support@apache-labs.com I hope that's the correct email?
I hope I get a response...
Hi John,
Please let us know how that turns out!
When I send email to that address, all responses come from the person who hijacked Apache's email account.
73,
Bryan
- Fri Jan 05, 2024 9:30 am
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis
OZ1CT-Ben wrote:Trynig to get this cmASIO up and run on my PC.... but I dont se any "cmASIO sign" on my screen ???? if no sign then it is not working ????
Hi Ben,
Depends on which version of Thetis you are running.
Richie added the cmASIO icon to the status-bar in version 2.10.3.5.
73,
Bryan
- Thu Jan 04, 2024 11:39 pm
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis
Finally hooked up the Universal Audio Volt 1 interface this evening. I get the green CM icon on the lower right side of the Thetis display. I have VAC turned off. But, turning the volume up in Thetis or the Volt 1 just produces a high pitched squeaking sound. I even tried Voicemeter Potato to see i...
- Wed Jan 03, 2024 7:22 pm
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis
Hi Ruben,
One more thing to keep in mind, because it's not immediately obvious, with the UMC202 (and all two input interfaces) both mic inputs are hot at the same time. So be sure to turn down the mic that you're not using,
(Although, it might be an interesting sound, come to think of it.)
73,
Bryan
One more thing to keep in mind, because it's not immediately obvious, with the UMC202 (and all two input interfaces) both mic inputs are hot at the same time. So be sure to turn down the mic that you're not using,
(Although, it might be an interesting sound, come to think of it.)
73,
Bryan
- Wed Jan 03, 2024 5:43 pm
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis
I have my MIC level set to the same 1db you have displayed there. Make sure the LINE/INST and the PAD buttons on the UMC are both popped out. Turn up the gain on the UMC until the CLIP led starts blinking, then back off a smidge. Turn OFF the 48v slide switch on the back, unless your microphone nee...
- Wed Jan 03, 2024 5:20 pm
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis
I emailed you a photo of the hostsample output screen. Here it is just in case you don't get it. That all looks perfect! The only thing left to try is more room in the fifo. Maybe it's a little sluggish and needs more help with thread synchronization. Add a DWORD value to the same reg key called AS...
- Wed Jan 03, 2024 4:03 pm
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis
Just press any key, and the subsequent screens are generated, until all the running ASIO drivers have been reported.
- Wed Jan 03, 2024 3:28 pm
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis
Hi James,
Unfortunately, you have become the guinea pig for the Audio Volt
Can you email me the detail output screen from hostsample?
What I'm looking for is the not the first screen that comes out, but the one with all the gory details about the Adio Volt.
73,
Bryan
Unfortunately, you have become the guinea pig for the Audio Volt
Can you email me the detail output screen from hostsample?
What I'm looking for is the not the first screen that comes out, but the one with all the gory details about the Adio Volt.
73,
Bryan
- Wed Jan 03, 2024 10:44 am
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis
I get the green CM icon on the lower right side of the Thetis display. But, turning the volume up in Thetis or the Volt 1 just produces a high pitched squeaking sound. Hi James, First off, Scott is correct: the Behringer UMC202HD is a no-brainer hookup. If you can get a refund from Guitar Center, I...
- Thu Dec 28, 2023 11:16 pm
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis 2.10.3.5 pre 3
What would happen if the driver was not set to 48KHz sample rate? In that case, a request to change to 48,000 is sent to the ASIO API. If that is successful, steps then proceed to bring the driver into its "prepared" state. If not, a debug message is sent reporting the specific trouble, t...
- Thu Dec 28, 2023 7:28 pm
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis
how or where do I select the inputs and outputs on my interface that I want to use to be the Anan speakers for output and the mic for input? Hi Terry, Thetis uses Input_1 & Input_2 for transmit (mic) audio and Output_1 & Output_2 for receive (headphone/speaker) audio. It's hard-coded, nothi...
- Thu Dec 28, 2023 9:19 am
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis 2.10.3.5 pre 3
I have used the hotsample.exe. It says "RODECaster" and when I add the string to registry, then reboot thetis; it says issue starting cmASIO check driver name in registry. Hi OM, Can you please send me (by PM or email) the complete output from the hostsample.exe utility? Since the RODECas...
- Wed Dec 27, 2023 10:52 am
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis 2.10.3.5 pre 3
I am running the 7000dle MKII (protocol 2) with a RODECaster duo and the ASIO drivers are installed for it. Is there something I am missing or is it incompatible? Hi OM, I don't have any experience with the RODEcaster, so it looks like you are the first to try :-) What was the text you used to popu...
- Tue Dec 26, 2023 10:29 am
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis 2.10.3.5 pre 3
2) Can LockMode function even though my Motu interface isn't on the same clock as the ANAN or my computer? 3) How does one verify that LockMode is actually functioning? I ask because I have the ASIOblocknum DWORD high bit set but I'm seeing no difference in core workload using CPUID Hardware Monito...
- Sun Dec 24, 2023 10:06 pm
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: Thetis v2.10.3.5 final release
So, essentially I gave cmASIO a go then disabled it in case the registry setting was interfering with VAC to/from the radio. Hi Dave, Okay, I understand now. Thanks for explaining! In that case, you'd be better off to delete the ASIOdrivername string value, which will return your rig to its default...
- Sun Dec 24, 2023 5:34 pm
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: Thetis v2.10.3.5 final release
I'm no audio expert so I suspect a wrong setting has got into my audio chain accidently as a result of the cmASIO changes in Thetis. I have made sure that the cmASIO Registry changes have been disabled by putting in a false ASIO name. Hi Dave, Just out of curiosity: please help me understand why yo...
- Sun Dec 24, 2023 12:29 am
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis 2.10.3.5 pre 3
Hi Joe, Yes, that's a valid entry for the registry key value. You might want to first try ffff0006 just to get your feet wet using blockMode. That way, you're not being too ambitious with the receive audio stream at the same time that you're trying to push the transmit audio stream. Once you see tha...
- Thu Dec 21, 2023 7:58 pm
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis 2.10.3.5 pre 3
I use the UMC202HD and it works fine with cmASIO on input channel 1. Is there anyway to switch to channel 2 on he 202HD using cmASIO in order to select a different microphone without having to use VoiceMeter? Hi Joe, Yes, cmASIO picks up both input channels on the 202, just plug in the mic and turn...
- Thu Dec 21, 2023 1:04 pm
- Forum: Thetis
- Topic: Thetis v2.10.3.5 final release
- Replies: 97
- Views: 195605
Re: Thetis v2.10.3.5 Pre-Release
I feel jealous because I can't make it flash here
- Thu Dec 21, 2023 12:35 pm
- Forum: Forum Problems (like posting photos, etc.)
- Topic: Forum going slow
- Replies: 5
- Views: 1968
Re: Forum going slow
Yes, slow as a slug!
Good catch on the thread view count, though.
Surely, Abhi doesn't host this on his own server?
Good catch on the thread view count, though.
Surely, Abhi doesn't host this on his own server?
- Thu Dec 21, 2023 11:43 am
- Forum: Thetis
- Topic: Thetis v2.10.3.5 final release
- Replies: 97
- Views: 195605
Re: Thetis v2.10.3.5 Pre-Release
Can't duplicate your bug.
Works fine here OM
Works fine here OM
- Thu Dec 21, 2023 11:11 am
- Forum: Thetis
- Topic: Thetis v2.10.3.5 final release
- Replies: 97
- Views: 195605
Re: Thetis v2.10.3.5 Pre-Release
Just turn off CAT/TCI and it works FB
- Thu Dec 21, 2023 10:50 am
- Forum: Thetis
- Topic: Thetis v2.10.3.5 final release
- Replies: 97
- Views: 195605
Re: Thetis v2.10.3.5 Pre-Release
Hi Tony,
Not seeing the blinking cmASIO icon, looks steady here on pre-5.
My CAT/TCI icon is OFF however.
73,
Bryan
Not seeing the blinking cmASIO icon, looks steady here on pre-5.
My CAT/TCI icon is OFF however.
73,
Bryan
- Thu Dec 21, 2023 12:47 am
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis 2.10.3.5 pre 3
Well I dont believe it, I have it working, So I've set the output of VoiceMeeter to the M-Audio M-Track Solo ASIO 48khz 64 Changed the Registry entry to Voicemeeter Virtual ASIO Started Thetis and I got a green cm speaker !! Audio is now routed via Voicemeeter to the M-Audio and the internal sound ...
- Wed Dec 20, 2023 6:56 pm
- Forum: Apache Labs News
- Topic: ANAN-G2 Shipping Update
- Replies: 318
- Views: 3195284
Re: ANAN-G2 Shipping Update
Placebo effect
- Wed Dec 20, 2023 2:13 pm
- Forum: Digital ("Virtual") Audio
- Topic: cmASIO feature in Thetis
- Replies: 233
- Views: 104618
Re: cmASIO feature in Thetis 2.10.3.5 pre 3
Update from here So I tried the M-Audio on a laptop, had the same results Hi Jim, As far as I know, you are the first user to try the M-Track Solo (or any M Audio device for that matter) with cmASIO. So, it's possible that the M-Track ASIO driver is just plain incompatible with cmASIO. I will have ...