Yep.....Mixer would do the trick....I have a DAW, with Behringer XR18, Cuebase, etc..
But was thinking about the guy who does not want to go that route, but has a line devices on hand...from days gone bye....
-B
Search found 51 matches
- Thu Jun 07, 2018 6:41 pm
- Forum: PowerSDR mRX
- Topic: Would it be possible...????
- Replies: 4
- Views: 4932
- Wed Jun 06, 2018 11:57 am
- Forum: PowerSDR mRX
- Topic: Would it be possible...????
- Replies: 4
- Views: 4932
Re: Would it be possible...????
Thanks Scott: A professional cart type digital recorder, instant push button recording and play back device..excellent for contest work or for multi "CQ" calls, also used for antenna experimental work........ Many operators have different DAW's set up for different band conditions, with di...
- Mon Jun 04, 2018 5:49 pm
- Forum: PowerSDR mRX
- Topic: Would it be possible...????
- Replies: 4
- Views: 4932
Would it be possible...????
There are hundreds of audio devices employing line in/line out .... that could be used in support of the Anan product. But to realize such you have to maintain the "Setup/Transmit screen so you can toggle between " microphone" and "Line In"... If a switch could be setup for ...
- Tue Apr 24, 2018 4:36 pm
- Forum: PowerSDR mRX
- Topic: Snap Crackle, Pop on Phone Monitor...
- Replies: 10
- Views: 9435
Re: Snap Crackle, Pop on Phone Monitor...
Fixed....installed a fresh copy of Windows 7 Professional...removed two boards that were baggage...a 6 out USB board and a com port board...
Now all is well....
Thanks Guys...
Now all is well....
Thanks Guys...
- Wed Mar 21, 2018 7:26 pm
- Forum: PowerSDR mRX
- Topic: 8000, upgrade, TX gone??
- Replies: 1
- Views: 2878
8000, upgrade, TX gone??
First solved mt Tick-Tock TX problem, was a CPU running in protective mode due to the liquid cooler running on low voltage... All fixed and running great... Just upgraded my 8000 to 3.4.8 ... on my first look see...the RX was fine but when I hit the PTT I have no audio just what he screen shot shows...
- Sun Mar 18, 2018 5:09 pm
- Forum: PowerSDR mRX
- Topic: Snap Crackle, Pop on Phone Monitor...
- Replies: 10
- Views: 9435
Re: Snap Crackle, Pop on Phone Monitor...
From a starting point of 512 Buffers/192,000 sample rate, ran a series of different settings...No help.. If you bring up SCOPE and key the mike, you can see the pops/cracks etc..... Went and checked all the Microphone settings ..nothing is close to "0" most ranges are in the -3 to -6 area....
- Sun Mar 18, 2018 2:06 am
- Forum: PowerSDR mRX
- Topic: Snap Crackle, Pop on Phone Monitor...
- Replies: 10
- Views: 9435
Re: Snap Crackle, Pop on Phone Monitor...
Not running VAC1 or 2, just using a DAW/Primary Audio ... Got 2 P-emails suggesting that I play with the Buffer settings..??
- Sat Mar 17, 2018 12:57 pm
- Forum: PowerSDR mRX
- Topic: Snap Crackle, Pop on Phone Monitor...
- Replies: 10
- Views: 9435
Re: Snap Crackle, Pop on Phone Monitor...
Radio was bought in August 2017...problem did not start up till mid Jan 2018..
W1FYI told me he had the same problem on his 200D ... Went on to say he thought WA0VY was having a similar problem and thought it was computer related??
W1FYI told me he had the same problem on his 200D ... Went on to say he thought WA0VY was having a similar problem and thought it was computer related??
- Fri Mar 16, 2018 6:17 pm
- Forum: PowerSDR mRX
- Topic: Snap Crackle, Pop on Phone Monitor...
- Replies: 10
- Views: 9435
Snap Crackle, Pop on Phone Monitor...
8000 with Headphone plugged direct in to front panel Headphone monitor... Upon SSB key-down, you can hear an intermittent Snap/Crackle...under the TX audio... noise does not trail audio, stop talking and it will pop/snap, etc...However the noise is not being transmitted... but it's a nuisance. Compu...
- Sun Feb 04, 2018 2:58 pm
- Forum: PowerSDR mRX
- Topic: PowerSDR Wave Recorder
- Replies: 0
- Views: 2795
PowerSDR Wave Recorder
Wonder if any thought has been given to upgrade the wave recorder module. The system as is works well, but what is needed the ability to save on the run recordings to a wave file. Right now I use an off line Mini Disk, then transpose the file etc... Would be nice, to SAVE, pick a Directory, then nam...
- Sun Nov 19, 2017 3:38 pm
- Forum: Microphones, Speakers & Audio Hardware
- Topic: ANAN 7000 DLE Line Out
- Replies: 9
- Views: 11311
Re: ANAN 7000 DLE Line Out
OK ... got it .. understand....
Thanks again!!
Bill
Thanks again!!
Bill
- Sat Nov 18, 2017 8:05 pm
- Forum: Microphones, Speakers & Audio Hardware
- Topic: ANAN 7000 DLE Line Out
- Replies: 9
- Views: 11311
Re: ANAN 7000 DLE Line Out
Hi Scott so the line in/out appear at the DE9 connector on the back panel... Where do I find a reading of the pin out...I guess we don't have a schematic on the 8000 as yet?? Or are the pins..linein-lineout-digital in - Digital out- and PTT in/out?? I know that's to many entries for the connector..B...
- Sat Nov 18, 2017 3:08 pm
- Forum: Microphones, Speakers & Audio Hardware
- Topic: ANAN 7000 DLE Line Out
- Replies: 9
- Views: 11311
Re: ANAN 7000 DLE Line Out
Lets talk about the LINE IN and LINE out on the 8000 and now the 7000 ...do I read right, that these are dead...nothing on them...??? So what is the purpose of such???? And is there a in and out on the RS232 or is it a DB9 connector and where do you find the pin outs.....or is it similar to the 200D...
- Wed Sep 06, 2017 5:33 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Got the RED & YELLOW
- Replies: 33
- Views: 31815
Re: Got the RED & YELLOW
The amplifier is a former Alpha 78. However the 8874's were replaced with a pair of Eimac 3CX 800's.... I released a pair of 9500's when the issue of repair/replace come to the forefront... But the modded 78 served me well has the spot auto tuning.. runs cool at 1500 has plenty of head room....so......
- Tue Sep 05, 2017 7:14 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Got the RED & YELLOW
- Replies: 33
- Views: 31815
Re: Got the RED & YELLOW
Yes it sure looks good....IMD at 250 watts, id down -85 ..... Awful lots of towel twisting to find it's a honest mistake.... But sure do want to thank you and all the guys for hanging in there...and yes a lot was learned.... Thanks A;;..and keep an eye of that monster hurricane..185 mph winds..most ...
- Tue Sep 05, 2017 3:24 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Got the RED & YELLOW
- Replies: 33
- Views: 31815
Re: Got the RED & YELLOW
After setting the proper levels, here is this AM's VIEW, at 1500 watts ..S-ATT = 14
download/file.php?mode=view&id=125
download/file.php?mode=view&id=125
- Tue Sep 05, 2017 11:55 am
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Pure Signal / wiring/ ANAN 8000DLE
- Replies: 50
- Views: 51892
- Mon Sep 04, 2017 7:47 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Got the RED & YELLOW
- Replies: 33
- Views: 31815
Re: Got the RED & YELLOW
Opened the radio ...yep it's reversed.... straightened it out...
I really like the way Apache designed this box...screws you can grab, and you can work on the radio without pulling it down...
Now tomorrow....at least progress was made!!
-Bill
I really like the way Apache designed this box...screws you can grab, and you can work on the radio without pulling it down...
Now tomorrow....at least progress was made!!
-Bill
- Mon Sep 04, 2017 5:37 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Got the RED & YELLOW
- Replies: 33
- Views: 31815
Re: Got the RED & YELLOW
Ps Iput and PS Feedback are reversed in my 8000. After testing all cables by using the two SMA ports, all the cables are fine. PS worked with the factory jumper and my RG8 cables, Also check the SMA factory adapters, they were all fine. So we reversed the cable from Input to Feedback, put 100 watts ...
- Mon Sep 04, 2017 12:19 am
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Got the RED & YELLOW
- Replies: 33
- Views: 31815
Re: Got the RED & YELLOW
Sorry but I was sure I answered the questions.... Remember..."I have NEVER seen any change on S-ATT it is always been 0 and nothing else no matter what power level or what amount of wattage I put through the system..." The only thing I haven'e done that was suggested: was to switch the cab...
- Sun Sep 03, 2017 2:55 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Got the RED & YELLOW
- Replies: 33
- Views: 31815
Re: Got the RED & YELLOW
New Pads ..no help!! Scott: Based on the info needed in the above, I have made a schematic of how the wiring for the 8000 should be...I don't want to post it until it's been proofed and corrected... Send me a good email and I will send it to you for a look see.... More and more guys are saying it's ...
- Fri Sep 01, 2017 10:10 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Got the RED & YELLOW
- Replies: 33
- Views: 31815
Re: Got the RED & YELLOW
my new attenuators just came in .....
- Fri Sep 01, 2017 2:52 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Got the RED & YELLOW
- Replies: 33
- Views: 31815
Re: Got the RED & YELLOW
[img][img][attachmhttps://apache-labs.com/community/download/file.php?mode=view&id=119ent=0]PS%20TT.jpg[/attachment][attachment=1]tune%20TT.jpg[https://apache-labs.com/community/download/file.php?mode=view&id=118/attachment][/img][/img] Here, I hope are your two screen shots...I wanted to Em...
- Fri Sep 01, 2017 12:22 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Got the RED & YELLOW
- Replies: 33
- Views: 31815
Re: Got the RED & YELLOW
Though the above was a neat bit of information...... I see what you say...yes, nothing more than +13dBm ..... but no matterr what I do ..what Pad..what level of power, ..when in TX the S-ATT never moves off 0. However if it were not for the color, I would say the PS is working.... I can undo the PS-...
- Thu Aug 31, 2017 8:34 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Got the RED & YELLOW
- Replies: 33
- Views: 31815
Re: Got the RED & YELLOW
In reading in other posts dealing with the same subject....I came across this sentence... See the sentence in BOLD ...I have nothing in the PS FEEDBACK SMA on the 8000 As you described, the XDC-1 forward sample output port is looking into a 50 ohm coaxial cable that is connected to the input of the ...
- Thu Aug 31, 2017 6:56 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Got the RED & YELLOW
- Replies: 33
- Views: 31815
Re: Got the RED & YELLOW
Yep ....... Forward Port on the coupler has the line with pads and goes to PS INPUT on the 8000 NOT the PS Feedback..... The coupler Reflected port has the 50 ohm load. Here is what Dave had to offer he simplest test would be to put a known amount of RF through the coupler and measure the forward po...
- Thu Aug 31, 2017 12:44 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Got the RED & YELLOW
- Replies: 33
- Views: 31815
Re: Got the RED & YELLOW
OK ..it's 7AM on the East Coast...Hurricane Harvey is here...BUT here we go... As instructed.....with step att in...the meter reads 0 at 1500 watts....(10db pad) Ran the step att manually ....ran from 0 to 30 db...NO CHANGE Changed cable... changed pads... Checked the 50 ohm load...reads 53 ohms... ...
- Thu Aug 31, 2017 11:44 am
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Got the RED & YELLOW
- Replies: 33
- Views: 31815
Re: Got the RED & YELLOW
OK ....I'm out of pocket today ...Wife and my, weekly day on the town, but on Friday AM, I'll go thru from A-Z as outlined.... WOW you are getting to the point that a trouble shooting "Sticky" for PS problems would be in order....
Look for a return Friday afternoon....
-Billy
Look for a return Friday afternoon....
-Billy
- Thu Aug 31, 2017 2:26 am
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Got the RED & YELLOW
- Replies: 33
- Views: 31815
Re: Got the RED & YELLOW
Yes...with the TT generator in the PS panel ...I get 1500 watts...., but still maintain the Yell/Red ID's......... the auto-attenuate is checked in the PS panel....but no green shows up ..... I had the 10db pad in.. If I drop back and eliminate the Coupler hook up..and put dual SMA jumper back in .....
- Wed Aug 30, 2017 4:16 pm
- Forum: PureSignal Operations (PowerSDR & Thetis)
- Topic: Got the RED & YELLOW
- Replies: 33
- Views: 31815
Re: Got the RED & YELLOW
OK ... saved the existing database.. upgraded from 3.4.1 to 3.4.2 Loaded a naked database Put enough in so I could test PS Started at 300 watts...ran up to 1500, and still Red & Yellow...When I went to SSB the Red ID was off ....Yellow on, and as I talked the red flickered with my voice... never...