Search found 60 matches

by W2PA
Fri Jan 12, 2018 3:05 am
Forum: MIDI Controllers
Topic: CMD PL1 issue with ACG Level control
Replies: 6
Views: 117

Re: CMD PL1 issue with ACG Level control

Thanks for reporting this, Gary. I've been using both a PL-1 and a Micro, but I have the AGC levels mapped to sliders on the Micro, so I haven't noticed this. I mapped one of the PL-1 wheels to RX1 AGC tonight and can re-create your problem. Strangely enough, if I have that AGC mapped to both a mini...
by W2PA
Wed Jan 10, 2018 1:41 pm
Forum: Thetis
Topic: Thetis ETA for release ?
Replies: 15
Views: 1531

Re: Thetis ETA for release ?

Just to complete the story - yes, Thetis has continued to receive attention. Most (likely all) enhancements to PSDR/OpenHPSDR mRX PS that have been made recently have also been carried over into Thetis. Doug gets the credit for keeping this happening and in sync.
by W2PA
Wed Dec 27, 2017 3:44 pm
Forum: PowerSDR mRX
Topic: NB/NB2 and Pan display on SSB-TX jumps around
Replies: 11
Views: 242

Re: NB/NB2 and Pan display on SSB-TX jumps around

One more observation...
I brought up SDRConsole on my RTL dongle and tuned to my 80m frequency using the dongle's whip antenna. I again saw no difference in the spectrum with NB/NB2 on or off, while transmitting as in the previous post.
by W2PA
Wed Dec 27, 2017 2:27 pm
Forum: PowerSDR mRX
Topic: NB/NB2 and Pan display on SSB-TX jumps around
Replies: 11
Views: 242

Re: NB/NB2 and Pan display on SSB-TX jumps around

I tried this out this morning. When I turn on NB or NB2 I see extra background levels on both sides of the main signal in the panadapter, that pulsates with my voice. These appear as very broad "shoulders" on the main signal. The behavior is not there with NB/NB2 off. I presume this is wha...
by W2PA
Fri Dec 15, 2017 11:38 am
Forum: PowerSDR mRX
Topic: Which Visual Studio version should I use?
Replies: 11
Views: 383

Re: Which Visual Studio version should I use?

Matt, We haven’t yet embraced the full Github process. So the best way to report this kind of minor change is to make the change yourself (and test it), and then send the modified source file to Doug, W5WC, who merges changes and stages the releases. In the case of the MIDI code, normally you could ...
by W2PA
Thu Dec 14, 2017 10:01 pm
Forum: PowerSDR mRX
Topic: Which Visual Studio version should I use?
Replies: 11
Views: 383

Re: Which Visual Studio version should I use?

Matt, I've been able to test MIDI code with PSDR-OSDR mRX PS without hitting the Power button. It doesn't even look for a radio until you do that. Most of the controls still work, however, so you can test a MIDI controller's ability to control them without turning it on. Of course, ultimately you wa...
by W2PA
Wed Dec 13, 2017 7:59 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Anan 8000 DLE Fans
Replies: 1
Views: 127

Re: Anan 8000 DLE Fans

There is a schematic available? I had no idea. Where can I get one?
by W2PA
Mon Dec 11, 2017 2:59 pm
Forum: PowerSDR mRX
Topic: Which Visual Studio version should I use?
Replies: 11
Views: 383

Re: Which Visual Studio version should I use?

Yes that's true, Scott. I can say only that my four or five beta testers have had no problem simply substituting executable files I produce in VS2017 (.exe and .dll files) into the current install directory, after renaming the release versions to enable going back to the release version. I know that...
by W2PA
Sun Dec 10, 2017 2:56 pm
Forum: PowerSDR mRX
Topic: Which Visual Studio version should I use?
Replies: 11
Views: 383

Re: Which Visual Studio version should I use?

Some of us are using Visual Studio 2015 or 2017. It works just fine under Windows 10. Doug then takes updates to source and recompiles under 2013.
by W2PA
Mon Nov 27, 2017 7:40 pm
Forum: Digital Mode & Logging Software
Topic: N1MM+ with PSDR mRX on CW
Replies: 9
Views: 377

Re: N1MM+ with PSDR mRX on CW

Gary, I've been using N1MM+ quite successfully on my ANAN-8000DLE with this setup: Two VSPE pairs as follows (choice of COM port numbers doesn't matter unless they conflict with something else): Pair 1 for CAT line - one side specified in N1MM config for "Kenwood" radio set to 19200,N,8,1,...
by W2PA
Tue Nov 14, 2017 3:55 pm
Forum: PowerSDR mRX
Topic: In case you missed it: PowerSDR mRX OpenHPSDR v 3.4.3
Replies: 17
Views: 1227

Re: In case you missed it: PowerSDR mRX OpenHPSDR v 3.4.3

Clay,

Thanks for discovering this bug in the MIDI VFO manipulations when in Collapsed view. It's fixed in the next version. And I'll send you an update to test shortly.

73,
Chris, W2PA
by W2PA
Tue Nov 07, 2017 3:16 pm
Forum: PowerSDR mRX
Topic: GUI Optimized for 4K
Replies: 5
Views: 455

Re: GUI Optimized for 4K

I'm using an LG 32" 4k monitor and Win 10 scaling at 125%. With this setup I can fit the six components of DXLab that I use most (cmd, dxk, dxv, pf, pv, sc), along with OpenHPSDR mrX 3.4.2 and WSJT-X with JTAlert - all with a bit of extra screen room left over to bring up DXLab's ww if I want (...
by W2PA
Tue Oct 10, 2017 5:55 pm
Forum: PowerSDR mRX
Topic: 630m and 2200m support?
Replies: 17
Views: 1348

Re: 630m and 2200m support?

As far as I can tell looking at the code, that button was originally used to select the 2m band (judging by the variable naming convention). Somebody evidently had a new use in mind after implementing the VHF+ button. But as of now, the LF/MF button does nothing but light up when you press it.
by W2PA
Thu Aug 24, 2017 7:42 pm
Forum: PowerSDR mRX
Topic: v.3.4.x xml d/b creation bug?
Replies: 5
Views: 549

Re: v.3.4.x xml d/b creation bug?

Thanks for tracking it down, Andrew. Glad there's a fix, but it's clearly not something that should happen. I'll have a look when I get a chance.
by W2PA
Sun Aug 20, 2017 11:43 am
Forum: PowerSDR mRX
Topic: v.3.4.x xml d/b creation bug?
Replies: 5
Views: 549

Re: v.3.4.x xml d/b creation bug?

Andrew, Thanks for noting this. It's not really a bug but certainly may be incorrect. The way the code is structured (I don't know how far back this goes), these segments and names are literally hard-coded into the software. I'll have a look at it and see if we can correct it according to what you p...
by W2PA
Mon Aug 07, 2017 7:55 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: 8000DLE serial number label
Replies: 6
Views: 610

Re: 8000DLE serial number label

So, the question remains: what to do about it? What's the glue Apache started using? Or did they do it right and make a more permanent marking? Absent any official recommendation, I suppose I'll wing it. But I'd think the correct way would be to use a stronger glue and then coat it with clear-coat (...
by W2PA
Mon Aug 07, 2017 2:53 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: 8000DLE serial number label
Replies: 6
Views: 610

8000DLE serial number label

Is anyone else having the problem of the serial number label peeling off its position on the rear underside cabinet? I imagine I'm not the only one. What is the suggested permanent fix? By the way whose idea was it to use a paper label for the serial number on a $4k piece of equipment? (I think I'm ...
by W2PA
Tue Aug 01, 2017 9:26 pm
Forum: PureSignal Operations
Topic: Electronic bias systems vs. PureSignal
Replies: 18
Views: 3076

Re: Electronic bias systems vs. PureSignal

Thanks, Paul! I ordered two as backups.
by W2PA
Tue Aug 01, 2017 1:56 am
Forum: PureSignal Operations
Topic: Electronic bias systems vs. PureSignal
Replies: 18
Views: 3076

Re: Electronic bias systems vs. PureSignal

Paul,

Thanks for the additional details and history. And the offer. I do have a complete set of schematics for the '89.

By the way I replaced the TX PIN diodes a few years ago. I sure enjoy completely silent QSK.
by W2PA
Sun Jul 30, 2017 7:59 pm
Forum: PureSignal Operations
Topic: Electronic bias systems vs. PureSignal
Replies: 18
Views: 3076

Re: Electronic bias systems vs. PureSignal

There seems to be several versions of the Alpha 89 out there. Mine is a 1994-vintage one (with the ETO logo) and has no dynamic bias manipulation. You have two states from which to choose: SSB and CW, as someone's described earlier, which insert one or two zener diodes. PS has no problems with this ...
by W2PA
Tue Jul 25, 2017 4:41 am
Forum: Forum Problems, Help & Suggestions
Topic: Hardware topics home
Replies: 3
Views: 612

Re: Hardware topics home

Ok, that makes sense, Scott.

So then my question is: where in the forum is the proper place to ask a question about a radio itself (i.e. the hardware) - a question having nothing to do with interfacing to anything else?
by W2PA
Mon Jul 24, 2017 7:26 pm
Forum: Forum Problems, Help & Suggestions
Topic: Hardware topics home
Replies: 3
Views: 612

Hardware topics home

Should we have a topic grouping around the various hardware models? Right now I don't see a place for questions about a specific Apache model, or OpenSDR board. There is a firmware group with a topic around each hardware platform. There is also a Topic group called Hardware & Software Interfacin...
by W2PA
Sun Jul 16, 2017 10:45 pm
Forum: MIDI Controllers
Topic: Function of the command A>B, A<B and A<>B for Midi controller in Hercules DJ control mp3 e2
Replies: 1
Views: 482

Re: Function of the command A>B, A<B and A<>B for Midi controller in Hercules DJ control mp3 e2

Shige-san, I looked at this again (more carefully) and can now confirm that the Behringer controller also behaves this way, compared with the PowerSDR/OpenSDR console. I incorrectly told you otherwise when we exchanged emails last week - my apologies. There is indeed apparently a difference. I concl...
by W2PA
Sat Jul 08, 2017 9:43 pm
Forum: PowerSDR mRX
Topic: Power sdr 3.4.2 CTUN on Stitched receivers
Replies: 2
Views: 577

Re: Power sdr 3.4.2 CTUN on Stitched receivers

Tony,

It's a bug, in a tangled web. Thanks for finding it.
by W2PA
Sat Jul 08, 2017 7:38 pm
Forum: PowerSDR mRX
Topic: PowerSDR mRX PS v3.4.2 A wish list
Replies: 6
Views: 1168

Re: PowerSDR mRX PS v3.4.2 A wish list

Geoff, No harm in asking. Good ideas abound and no one has a monopoly on them. (The beauty of open source.) 1 - MNF already is saved and restored in the DB. Are you seeing otherwise. It works for me. 2 - RIT has been changeable when off for a while. It works that way on many rigs-with-knobs, too. 3 ...

Go to advanced search