Search found 175 matches
- Sun Feb 18, 2024 4:23 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Anan 7000 DLE MKII new firmware protocol2
- Replies: 3
- Views: 1178
Re: Anan 7000 DLE MKII new firmware protocol2
@Ermanno From the serial number I think you have a EP4CE115F29C8N Cyclone IV series FPGA for which below is the latest protocol 2 firmware: https://www.dropbox.com/scl/fi/62ce6ixijhrr9gvdknfim/Metis_Orion_MkIII_Protocol_2_v2.2.3C.rbf?rlkey=vtqv6itevnd2sxu5xb2coioae&dl=0 https://www.dropbox.com/s...
- Sat Feb 17, 2024 9:14 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
Gary, did you mean "Both 12.2.4 G & F produced the best APD /Amp View results..." or "Both 12.2.4 G & H produced the best APD /Amp View results..." ? I think you meant the latter. In F, G, and H I made sure that the 122.88MHz clock was the same, not buffered through other...
- Sat Feb 17, 2024 6:39 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
It shouldn't affect your EB-104 although I'm not that familiar with it. If you don't connect the 10-pin SPI header to it then it shouldn't affect it. Nice to know about no sequence errors which at least shows the network timing as working. Here are some more images to try. Probably it for today. Tha...
- Sat Feb 17, 2024 5:30 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
Were you seeing any sequence errors with the two that somewhat worked? Just a note for those interested, these last 4 images were the exact same code used in v12.1.8 that seems to work for most. Same Quartus v21.1 tools to build. The only difference is a few lines that send SPI data to the PA Filter...
- Sat Feb 17, 2024 12:18 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
There is another tester on a github issue thread (for Thetis) that is testing these and getting the same results as you. You both have mentioned that if you go back to 12.1.8 things just work. So I put only the fixes for the CW/RF issue in to 12.1.8 and here are 4 images of that. I changed the versi...
- Fri Feb 16, 2024 10:07 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
Glad to hear something is working. I'm not sure how it got missed, it isn't on the github bug/issue thread maybe up further in this one. Actually it is in my private messages on this board, DG9FDA had found seq errors during TX with 12.2.1C. The 12.2.1B was reported to not connect. At any rate, let ...
- Fri Feb 16, 2024 8:00 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
Did you have a chance to try the C version? https://www.dropbox.com/scl/fi/kzu37u2n1qbvuttqi8iyj/Metis_Angelia_Protocol_2_v12.2.1C.rbf?rlkey=m1de81a69d5oj9j66xbsbbf3a&dl=0 I'm working on another set of 4 going further back, almost back at the 12.2.1A scenario. Will post in roughly an hour or so....
- Fri Feb 16, 2024 7:03 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
Gary, I did see that 12.2.1A somewhat worked for you. Another tester complained of bad TX spectra. From that I decided to rework some of the timing in the TX clocking area. That is when testers report no longer being able to connect. So I've been working somewhat backwards from there. I'm thankful t...
- Fri Feb 16, 2024 12:54 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
Tnx Gary for also testing these. I found where there was an issue in the last 4 images such that it prevented the Ethernet from working at all. I wish I still had an Angelia to test on. Anyway, I fixed that and generated 4 more images. NOTE: these have version 12.2.3 : https://www.dropbox.com/scl/fi...
- Thu Feb 15, 2024 10:57 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
@DL2HBJ
Jan,
Tnx for trying them. I'm assuming that none of them would connect, hence you
had to use the Bootloader.
I made changes to the Ethernet code for these 4 images, so knowing they didn't connect
would be good to know.
I'll have to explore this more...
Jan,
Tnx for trying them. I'm assuming that none of them would connect, hence you
had to use the Bootloader.
I made changes to the Ethernet code for these 4 images, so knowing they didn't connect
would be good to know.
I'll have to explore this more...
- Thu Feb 15, 2024 2:33 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
Here are 4 more to images to test. I don't have a 100D so I cannot test them myself. Please let me know what you find: https://www.dropbox.com/scl/fi/aa98p0qy8bvd8vjnz0s4m/Metis_Angelia_Protocol_2_v12.2.2A.rbf?rlkey=8e23mpbx3vj5l8e9ouhopb4l8&dl=0 https://www.dropbox.com/scl/fi/fcazl1r35xtagdyyh8...
- Wed Feb 14, 2024 5:07 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
@dl2hbj
What was it about the A and C versions that didn't work for you, was it seq errors or were there
other issues as well?
What was it about the A and C versions that didn't work for you, was it seq errors or were there
other issues as well?
- Tue Feb 13, 2024 11:03 am
- Forum: G2 Operating System & Applications
- Topic: G2 distorted audio using TRS and standard mic input
- Replies: 78
- Views: 13654
Re: G2 distorted audio using TRS and standard mic input
Hi Rich,
Your audiotest directory looks like the application has not been built yet.
From the audiotest directory, try typing:
make
then you should be able to run it:
./audiotest
Your audiotest directory looks like the application has not been built yet.
From the audiotest directory, try typing:
make
then you should be able to run it:
./audiotest
- Mon Feb 12, 2024 6:34 pm
- Forum: G2 Operating System & Applications
- Topic: G2 distorted audio using TRS and standard mic input
- Replies: 78
- Views: 13654
Re: G2 distorted audio using TRS and standard mic input
When you type in: cd github/Saturn/sw_projects/audiotest try to get a listing of that directory by typing: ls -l This is what I see: /home/pi/github/Saturn/sw_projects/audiotest# ls -l total 156 -rwxr-xr-x 1 mh mh 54368 Jul 5 2023 audiotest -rw-r--r-- 1 mh mh 17047 Jul 5 2023 audiotest.c -rw-r--r-- ...
- Mon Feb 12, 2024 10:01 am
- Forum: G2 Operating System & Applications
- Topic: G2 distorted audio using TRS and standard mic input
- Replies: 78
- Views: 13654
Re: G2 distorted audio using TRS and standard mic input
Hi Rich,
It's the space in the directory name that is causing the issue.
Try either escaping the space by putting a slash in front of it:
cd github/Saturn/sw\ projects/audiotest
or putting quotes around the line:
cd "github/Saturn/sw projects/audiotest"
73
-Rick / N1GP
It's the space in the directory name that is causing the issue.
Try either escaping the space by putting a slash in front of it:
cd github/Saturn/sw\ projects/audiotest
or putting quotes around the line:
cd "github/Saturn/sw projects/audiotest"
73
-Rick / N1GP
- Sat Feb 10, 2024 7:39 pm
- Forum: Thetis
- Topic: Can you use CAT/MIDI at the same time?
- Replies: 12
- Views: 1338
Re: Can you use CAT/MIDI at the same time?
Please post some pictures when you get it up and running!
- Fri Feb 09, 2024 6:51 pm
- Forum: Thetis
- Topic: LED Mirror on setup F/W set window (FW 2.2.2)
- Replies: 3
- Views: 936
Re: LED Mirror on setup F/W set window (FW 2.2.2)
The LED Mirror is meant to be used for debugging purposes and represents data that the firmware wants to show the user via the client app. I had enabled LED1 and LED2 to show which Ethernet Phy chip was installed on the Orion board. It can be either a KSZ9021 or KSZ9031. If LED1 is lit then its a KS...
- Thu Feb 08, 2024 10:39 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
@G3ZQH OK, tnx for trying those. So I went back to the pre4 firmware and added the same fixes for the RF on RX-only. I have put these at version 1.9.5 Here are a couple of images to try. Please note that I have no way of testing these as I don't have a 200D. https://www.dropbox.com/scl/fi/vejjeq8mbj...
- Thu Feb 08, 2024 7:29 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
@G3ZQH Hi Dave, When Rob was helping me test the 200D firmware I had sent him two other F/W images to try. Could you give these a try also and let me know how they work out for you. I can put some of the 'pre4' timing back in and generate some new images with that if these don't work out for you. ht...
- Wed Feb 07, 2024 4:22 pm
- Forum: G2 Operating System & Applications
- Topic: Script to download the latest Pro2 and P2app
- Replies: 19
- Views: 1812
Re: Script to download the latest Pro2 and P2app
I upgraded my G2 to v12 / 15 and it is working fine, transmitting fine
using either pihpsdr or thetis. I am running the latest of both apps.
using either pihpsdr or thetis. I am running the latest of both apps.
- Wed Feb 07, 2024 12:05 am
- Forum: G2 Operating System & Applications
- Topic: Script to download the latest Pro2 and P2app
- Replies: 19
- Views: 1812
Re: Script to download the latest Pro2 and P2app
Please make sure your running the latest Thetis: https://github.com/ramdor/Thetis/releases/download/v2.10.3.6-dev_2/Thetis-v2.10.3.6-dev_2.x64.msi I think in between firmware updates and Thetis updates there were some mis-configurations. I have not updated my G2 yet, I will tomorrow and post if I se...
- Tue Feb 06, 2024 11:03 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
That's great news Vin. I'm glad it is working for you and you now know
you have a cyclone 5 (CV) unit.
you have a cyclone 5 (CV) unit.
- Tue Feb 06, 2024 10:37 pm
- Forum: G2 Operating System & Applications
- Topic: Script to download the latest Pro2 and P2app
- Replies: 19
- Views: 1812
Re: Script to download the latest Pro2 and P2app
Hi John,
Did you power-off the G2 after upgrading? If not maybe try that.
I'm not sure, Laurence can confirm, that maybe the FPGA firmware needs
a power restart after upgrading.
-Rick / N1GP
Did you power-off the G2 after upgrading? If not maybe try that.
I'm not sure, Laurence can confirm, that maybe the FPGA firmware needs
a power restart after upgrading.
-Rick / N1GP
- Wed Jan 31, 2024 4:59 pm
- Forum: Thetis
- Topic: 700DLE/Thetis ext 10 Mhz sorce( AND) correction factor?
- Replies: 12
- Views: 2373
Re: 700DLE/Thetis ext 10 Mhz sorce( AND) correction factor?
Robert,
You should be all set with 2.2.2A, it has both RF burst and PLL fix.
You should be all set with 2.2.2A, it has both RF burst and PLL fix.
- Tue Jan 30, 2024 9:48 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
Hi Vin,
Check to see if there is a '-CV' in the serial number of the unit.
That would tell you if it had a Cyclone 5 'V'.
There is no harm in trying both the EP4CE115 Cyclone IV
or 5CEFA9F31 Cyclone V firmware images. If one works, that is
the Cyclone variant that your unit has.
-Rick / N1GP
Check to see if there is a '-CV' in the serial number of the unit.
That would tell you if it had a Cyclone 5 'V'.
There is no harm in trying both the EP4CE115 Cyclone IV
or 5CEFA9F31 Cyclone V firmware images. If one works, that is
the Cyclone variant that your unit has.
-Rick / N1GP
- Sun Jan 28, 2024 10:41 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
So sorry for any confusion, the only difference for the 7/8000 mkII 2.2.1 and 2.2.2 is that I added LPF bits in the "fix". All the other firmware images have the LPF bits since they were created after. The ones that have 2 firmware images to try (besides the 7/8000 MkII) are only there bec...
- Sun Jan 28, 2024 10:03 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Re: Firmware fix for RF appearing on RX only ports
No issues with 2.2.1, it has the necessary TX ANT 1-3 bits, I had added the LPF TX bits
to 2.2.2 just to be more complete.
All other FW images also have the LPF bits as well.
to 2.2.2 just to be more complete.
All other FW images also have the LPF bits as well.
- Sun Jan 28, 2024 4:17 pm
- Forum: Protocol 2 Firmware (all radios)
- Topic: Firmware fix for RF appearing on RX only ports
- Replies: 77
- Views: 13126
Firmware fix for RF appearing on RX only ports
Below are links to firmware updates for the various ANAN radios. Some have 2 or more images, try the others in case you have problems with the 1st. Pay attention to the FPGA part number if you are updating a MkIII. This is a fix for a bug Richie has mentioned in the Thetis release notes and kept tra...
- Tue Jan 23, 2024 8:38 am
- Forum: Thetis
- Topic: 700DLE/Thetis ext 10 Mhz sorce( AND) correction factor?
- Replies: 12
- Views: 2373
Re: 700DLE/Thetis ext 10 Mhz sorce( AND) correction factor?
Hi Robert, As Bryan has mentioned, I did find that on the Cyclone V boards the frequency was off. I was able to correct it by changing the PLL assignments. Lately I have been working on a bug that was producing a short burst of RF on any RX only antenna ports (1 - 3). These new CV firmware images ad...
- Sat Jan 06, 2024 8:53 pm
- Forum: Thetis
- Topic: PLL Not Locked on 8000DLE
- Replies: 2
- Views: 1025
Re: PLL Not Locked on 8000DLE
That's fairly old firmware. Check this thread: https://community.apache-labs.com/viewtopic.php?f=32&t=4462 You probably want to download and install 'Metis_Orion_MkII_Protocol_2_v2.1.18.rbf' BTW, the 'PLL Unlocked' message is a misnomer, that version of firmware didn't update the pll_locked vari...