Search found 346 matches

by W1AEX
Mon Jul 26, 2021 5:26 pm
Forum: Thetis
Topic: Thetis v2.8.11 - current issues
Replies: 605
Views: 18263

Re: Thetis v2.8.11 - current issues

Hi Mark,

On the "Transmit" tab where you save your profiles, down in the lower left corner.

Rob
by W1AEX
Mon Jul 26, 2021 5:18 pm
Forum: Thetis
Topic: Thetis v2.8.11 - current issues
Replies: 605
Views: 18263

Re: Thetis v2.8.11 - current issues

Richie, Just a quick note to thank you for all your work and to say that 21e is running smoothly on this end for all the features I use. I really like the easy convenience of the new bandstack interface along with the TX profile highlighting for saved items and the labeling of the ADC assignments. G...
by W1AEX
Thu Jul 15, 2021 4:24 pm
Forum: Thetis
Topic: New Thetis Skin - OE3IDE-StarTrek
Replies: 18
Views: 573

Re: New Thetis Skin - OE3IDE-StarTrek

I love the "Starfleet" insignia on the power button! Nicely done!

73, Rob W1AEX
by W1AEX
Fri Jul 09, 2021 1:49 am
Forum: Thetis
Topic: New Thetis Skin - OE3IDE-Yaesu
Replies: 21
Views: 870

Re: New Thetis Skin - OE3IDE-Yaesu

Thank you Ernst! That is a beauty!

73, Rob
by W1AEX
Sun Jul 04, 2021 2:02 am
Forum: Thetis
Topic: Thetis v2.8.11 - current issues
Replies: 605
Views: 18263

Re: Thetis v2.8.11 - current issues

All button packs at the link below have been updated to support the Quick Recall Buttons and the 2TON button in Thetis version 2.8.11 21c. http://www.w1aex.com/hpsdr/hpsdr.html If you simply want to add the Quick Recall Buttons to any currently installed skin you can download this simple pack that w...
by W1AEX
Fri Jul 02, 2021 3:22 pm
Forum: Network Connections & Network Hardware
Topic: Anan 100 RJ45 Jack
Replies: 6
Views: 360

Re: Anan 100 RJ45 Jack

Hi Ken, I think Scott is right that the first thing to try is to re-flow the solder on the pins of that RJ45 jack. As someone who took his ANAN-100 apart multiple times I can tell you that it is not terribly difficult. Barry - N1EU did a great job of giving step-by-step instructions if you have not ...
by W1AEX
Wed Jun 30, 2021 3:53 pm
Forum: Thetis
Topic: Thetis v2.8.11 - current issues
Replies: 605
Views: 18263

Re: Thetis v2.8.11 - current issues

Well Rob, I even had to get my brother involved in this as he has looked at such oddities over the years. It is related to the drop shadow of the form. Short story is that we now calculate the size of the shadow using DwmGetWindowAttribute and some jiggery-pokery related to operating system version...
by W1AEX
Wed Jun 30, 2021 1:39 am
Forum: Thetis
Topic: Thetis v2.8.11 - current issues
Replies: 605
Views: 18263

Re: Thetis v2.8.11 - current issues

Hi Richie, I still have the earlier 2.8.11 64-bit version installed and when compared on the desktop to the new 32-bit version (both opened up but not running) the difference in the GUI size with the same resolution setting was easily seen. I confirmed with my screen capture software that something ...
by W1AEX
Tue Jun 29, 2021 11:55 pm
Forum: Thetis
Topic: Thetis v2.8.11 - current issues
Replies: 605
Views: 18263

Re: Thetis v2.8.11 - current issues

Hi Richie, The only anomaly that I noticed today with the new version is that the resolution scaling does not seem to be accurate when using the presets down in the lower left corner of the status bar. As an example, to make the GUI display as 1280 x 720 the setting in the status bar needs to be set...
by W1AEX
Tue Jun 29, 2021 7:30 pm
Forum: Thetis
Topic: Thetis v2.8.11 - current issues
Replies: 605
Views: 18263

Re: Thetis v2.8.11 - current issues

All button packs at the link below have been updated to support the Quick Recall Buttons and the 2TON button in Thetis version 2.8.11 21b. If you simply want to add the Quick Recall Buttons to any currently installed skin you can download this simple pack that will install only the buttons that Rich...
by W1AEX
Sat Jun 19, 2021 4:22 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: 7000dle mkII - low output power
Replies: 8
Views: 377

Re: 7000dle mkII - low output power

Hi Richie, I would agree with what Don mentioned above in the thread. This can be an indication of a filter that is not optimized for a particular band, or it could possibly be damaged. One pretty good tell is to look at the total current draw from the power supply when a band that can produce rated...
by W1AEX
Fri May 21, 2021 2:24 am
Forum: PureSignal Operations (PowerSDR & Thetis)
Topic: Coupler Solutions
Replies: 11
Views: 2447

Re: Coupler Solutions

Nick, That is awesome that you have Pure Signal functioning quite nicely with the Red Pitaya hardware! Thank you for sharing the details of your setup. I notice you have Pure Signal wrapped around the TL-922 with very respectable results. I've read with interest different things people have done wit...
by W1AEX
Sun Apr 18, 2021 8:13 pm
Forum: Thetis
Topic: Spotting Menu Issues
Replies: 8
Views: 1014

Re: Spotting Menu Issues

Wow! I love what Alex did here. It's very convenient to have the option to hit the Two-Tone test from the front panel and the PBB and CFC enable/disable ability is also really nice. Works fine!

73, Rob W1AEX

Image
by W1AEX
Tue Apr 06, 2021 12:05 pm
Forum: Thetis
Topic: Fatal Error Message.
Replies: 4
Views: 705

Re: Fatal Error Message.

Is it possible you have the windows display font setting changed to something other than the default? As I recall this will cause a fatal error that brings up a string of console errors when you launch PSDR or Thetis.

73, Rob W1AEX
by W1AEX
Sun Apr 04, 2021 9:20 pm
Forum: PowerSDR mRX
Topic: Getting back on the air
Replies: 2
Views: 477

Re: Getting back on the air

Welcome back! Your best course would be to move to Thetis v2.8.11 which is the latest release. It's light-years ahead of the last PowerSDR mRX PS release which appears to be at end-of-life as far as any further development goes. Thetis version 2.8.11 will work with either protocol 1 or protocol 2 an...
by W1AEX
Sat Mar 27, 2021 5:14 pm
Forum: Thetis
Topic: Noise Burst on initial transmit
Replies: 76
Views: 5004

Re: Noise Burst on initial transmit

EDIT: Looks like Tom and I had the same idea at about the same time ;) I'm curious if any of the transition timing settings along the left side of the Thetis "Options/Options-1" menu page might help with this issue. Would be worth a shot if you have not tried them out. 73, Rob W1AEX http:/...
by W1AEX
Fri Mar 19, 2021 10:19 pm
Forum: Thetis
Topic: How to update band name in VFO display?
Replies: 5
Views: 788

Re: How to update band name in VFO display?

Yep, just as Gary said, export a copy of your database save it as a backup in case you mess something up. Open your database.xml with notepad. Edit the entries in the Bandtext section as you wish and save it. Then copy and paste the entire Bandtext section of your database into a separate text file ...
by W1AEX
Mon Feb 08, 2021 2:59 pm
Forum: Thetis
Topic: Why <fill in the blank> "doesn't work in Thetis..."
Replies: 6
Views: 16413

Re: Why <fill in the blank> "doesn't work in Thetis..."

Thanks, Rob. ...looks like I good up to about 1.5 megs. I looked at what it takes to update firmware today. It didn't seem overly simple. Thanks again, Dick - KA5KKT Hi Dick, As Leon noted, now that you know you have protocol 2 installed, you can simply look at the H/W Select tab and you will see w...
by W1AEX
Sun Feb 07, 2021 5:08 pm
Forum: Thetis
Topic: Why <fill in the blank> "doesn't work in Thetis..."
Replies: 6
Views: 16413

Re: Why <fill in the blank> "doesn't work in Thetis..."

Assuming you have Thetis v2.8.11 installed: 1. Power up your ANAN 2. Start Thetis 3. Look at Setup>F/W set What sampling rates are available? 1. If you only see three sampling rates: 48k, 96k, 192k you have protocol 1 installed 2. If you see more than three sampling rates, you have protocol 2 instal...
by W1AEX
Mon Jan 11, 2021 3:52 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: What Mic Are You Using?
Replies: 15
Views: 2361

Re: What Mic Are You Using?

Hi Mark, I made a cable using balanced line shielded mic cable with a female XLR on one end and a 1/8 inch TRS plug on the other connected as shown in the screenshot. Works great with all my studio dynamic microphones. http://www.w1aex.com/archive/XLR_to_TRS.jpg 73, Rob W1AEX Note: You can hear the ...
by W1AEX
Sun Jan 10, 2021 8:08 pm
Forum: Microphones, Speakers & Audio Hardware
Topic: What Mic Are You Using?
Replies: 15
Views: 2361

Re: What Mic Are You Using?

Hi Mark, With the CFC voice processing suite in Thetis it's possible to take a very inexpensive mic and produce beautiful broadcast-quality audio or beastly DX audio without much fuss. When I am in the mood for simplicity I plug a Behringer XM-8500 dynamic that I bought on Amazon for 20 bucks into t...
by W1AEX
Fri Dec 11, 2020 5:46 pm
Forum: Thetis
Topic: New Skins for Thetis and PowerSDR mRX PS
Replies: 20
Views: 3035

Re: New Skins for Thetis and PowerSDR mRX PS

Looking good Perry! Hey, I have one last skin for PowerSDR mRX PS to encourage those guys who are still clinging to that old platform to move up to Thetis. The skin is a little rusty and broken but hopefully it will encourage those guys to move to all the nice things in the latest version of Thetis....
by W1AEX
Wed Dec 09, 2020 9:25 pm
Forum: Thetis
Topic: New Skins for Thetis and PowerSDR mRX PS
Replies: 20
Views: 3035

Re: New Skins for Thetis and PowerSDR mRX PS

Another skin release from Jeff - W2NBC. This one is my favorite. The menu items, buttons, sliders and grouped controls pop right out clearly. Notice the lighting effects in the Panadapter display as well as along the edges of the control panels. This one is a piece of art! You can download the W2NBC...
by W1AEX
Sat Dec 05, 2020 3:23 am
Forum: Thetis
Topic: New Skins for Thetis and PowerSDR mRX PS
Replies: 20
Views: 3035

Re: New Skins for Thetis and PowerSDR mRX PS

Thank you for your kind words Leon. The skins shown were actually created by Jeff - W2NBC so he was the hard-working creative one. Unfortunately, the layout of Thetis is not adjustable by us users. We can switch to Collapse mode or Andromeda display mode to make the layout a little different but we ...
by W1AEX
Mon Nov 30, 2020 3:11 pm
Forum: Thetis
Topic: New Skins for Thetis and PowerSDR mRX PS
Replies: 20
Views: 3035

Re: New Skins for Thetis and PowerSDR mRX PS

Hi Mark, The Rx Ant button doesn't actually switch anything off, it simply allows you to toggle between the Rx Ant that has been selected (from either ANT-2 or ANT-3) to the selected Tx Ant in the Antenna Control matrix. Jeff's implementation actually might make more sense than what has been done be...
by W1AEX
Sun Nov 29, 2020 8:56 pm
Forum: Thetis
Topic: New Skins for Thetis and PowerSDR mRX PS
Replies: 20
Views: 3035

New Skins for Thetis and PowerSDR mRX PS

W2NBC (Jeff) did some beautiful artwork and created a new button set and new sliders. He added some custom console panels and came up with some really nice skins. You can download the full skins, or if you would like to only install the buttons or sliders into an existing skin just browse to the bot...
by W1AEX
Tue Nov 24, 2020 5:40 pm
Forum: Thetis
Topic: What client software are YOU using ??
Replies: 7
Views: 1222

Re: What client software are YOU using ??

I am using Thetis v2.8.11 for all the features it offers and the incredible performance it delivers. In addition to what has been mentioned above I would add that the Zeus Radio software is great fun to tinker with and it is fully RX and TX capable. It is not free but you can play around with the de...
by W1AEX
Mon Nov 16, 2020 4:55 pm
Forum: Thetis
Topic: Thetis 2.8.11 ( 64 bit ) Power and signal level issues
Replies: 7
Views: 920

Re: Thetis 2.8.11 ( 64 bit ) Power and signal level issues

I agree with Scott's comments Pierre. My move from v2.7.0_a3 to the 2.8.11 version went very smoothly. I did start with a fresh database provided by v2.8.11 but I had no problem exporting all my TX profiles from v2.7.0_a3 and then importing them directly into v2.8.11 32-bit and 64-bit. I use VAC to ...
by W1AEX
Sat Oct 31, 2020 12:20 am
Forum: Keys, Keyers, Paddles & Bugs
Topic: CW setup in Thetis 2.8.11?
Replies: 6
Views: 1699

Re: CW setup in Thetis 2.8.11?

Hi Dave, All the skins should be compatible with PowerSDR mRX PS and Thetis. That being said, now and then a button slips by and that is what happened with Joe's skins. I found the error and fixed it in the downloadable button pack at the link below. If you download it and then unzip it into the Con...
by W1AEX
Fri Oct 30, 2020 3:29 pm
Forum: Keys, Keyers, Paddles & Bugs
Topic: CW setup in Thetis 2.8.11?
Replies: 6
Views: 1699

Re: CW setup in Thetis 2.8.11?

"Also shouldn't the APF RX1 button change colors when selected? When I click it, it moves a bit and I get a small APFm message in the VFO A window. I think a lighted button would be nice." Dave, You didn't mention if you were using one of my "skins" but if so, older versions will...

Go to advanced search